Abstract:: Laser detection has become one of the most important detection types because of its high detection accuracy, fast response speed and strong anti-interference ability, which is the key technology in tracking, pointing and ranging detection systems. The requirements of the dynamic range and reliability of laser detection are very strict for a maneuvering flight target’s detection. For a small or long-distance target, the echo signal reflected by the target is very weak, so the laser detection circuit needs to be very high sensitive. For a large or short-distance target, the circuit is required to adapt to strong light signal and improve reliability, so the laser detection circuit should have a high damage threshold. Based on the detection requirements of high reliability and large dynamic range, as well as the strict limitation on volume and weight, in this paper it is considered that the design with only a single detector and the matching circuits realizes laser detection and reception. In the development of optoelectronic devices, the Avalanche Photo Diode ( APD ) is very suitable for the detection of laser echo signal reflected by a long-distance target. The performance of APD affects the detection performance index of the system directly. A laser detection circuit based on APD is designed to detect maneuvering flight targets in space. The high sensitivity is realized by setting suitable circuit parameters, and the high-voltage unloading function is designed to ensure that the strong laser does not damage the detector. The design greatly improves the detection dynamic range of the laser detection system. At the same time, the circuit has high signal-to-noise ratio, detection probability and high reliability. In order to achieve high detection sensitivity, the operating voltage is higher than 300 V @25 according to the requirements of APD's optimal signal-to-noise ratio. The operating voltage formes avalanche gain, and the detection sensitivity could reach the magnitude of nava. At the same time, in order to ensure the effective response of strong laser signal for the detector, avoiding irreversible damage and improving reliability, it is designed that a high voltage unloading circuit when strong pulse light signal could reach 45 mW or more. The dynamic range could reach up to 67 dB. Through the test and analysis, the design in this paper can effectively ensure the performance and reliability of the system.

The Laser Driver and Receiver Circuit for Diode Pumped Solid State Laser Mini-Rangefinder

Design of an Autonomous and Controllable Laser Ranging System

Theoretical Analysis Of The Gauge Laser Sensor And Several Design Parameters

Design of the Receiver Circuit in Pulsed Lased Rang Finding

Design and fabrication of a high-precision 360 laser receiver for leveling applications

Handheld Laser Rangefinder and Its Transmitter Circuit

894 nm external cavity diode laser

Design of Intelligent Receiver System for Phase-Shift Laser Range Finder

A Wide dynamic range high-speed receiving circuit applied to a pulse laser rangefinder

Study on Pulse Receiver Technology in Pulsed Laser Rang Finding

A wide dynamic range laser rangefinder with cm-level resolution based on AGC amplifier structure

Modulated High Power and Narrow Pulse Width Laser Drive Circuit for Lidar System

The design of laser detection circuit with high reliability and large dynamic range based on APD

Laser-induced Damage in a Silicon-Based Photodiode by MHz Picosecond Laser

A Kind of High Bit Rate Laser Diodes Driver

Large current nanosecond pulse generating circuit for driving semiconductor laser diode

A Load-Adaptive Driving Method for a Quasi-Continuous-Wave Laser Diode

Design of pulse phase shift laser range finder

Design and Implementation of a Power Semiconductor-Based Switching Mode Laser Diode Driver

A laser source driver in 0.18 <i></i>m SiGe BiCMOS technology for high speed quantum key distribution

Design of Diode Pumped All-Solid-state Laser for SLA