Abstract:1135 Objectives: Clinical SPECT systems suffer fundamental limitations of low resolution (1~2 cm) and low sensitivity (0.01%~0.02%) from mechanical collimators. To overcome this limit, we propose an innovative self-collimating SPECT design concept. With a multi-layer interspaced mosaic detector (MATRICES) architecture, the spatially distributed sensitive scintillators play the role of collimation instead of absorptive heavy-metal materials. This design concept breaks away from the interdependency of resolution and sensitivity of a conventional SPECT system and simultaneously improves both features. In this work, we propose a modular self-collimating clinical SPECT system design and evaluate its performance through numerical simulations. Methods: The self-collimating SPECT system consists of 6 MATRICES detector heads that form a hexagon with an 800-mm bore size. Each MATRICES detector head has 4 scintillator layers on behind of a high opening ratio (4%) metal plate. The 3 scintillator layers in the middle consist of 75 (tangential) × 37 (axial) GAGG(Ce) crystals with a size of 4.0 mm (tangential) × 4.0 mm (axial) × 6.0 mm (radial). The space between neighboring scintillators is also 4.0 mm (tangential) × 4.0 mm (axial), i.e. the scintillators are interspaced that forms a mosaic pattern. The outermost scintillator layers consist of 150 × 75 GAGG(Ce) crystals with the same size. There is no gap between neighboring scintillators in this layer. We developed a numerical simulation program for system matrix derivation with multi-ray-tracing method. The simulated system has a FOV size of 500 mm (∅) × 300 mm(L) with a voxel size of 0.5 mm × 0.5 mm × 0.5 mm. We simulated a uniform cylindrical source across the FOV to measure the detection efficiency. We evaluated the resolution performance with a planar hot rod phantom. It consists of 6 sectors of hot rods with diameters of 1.25, 1.5, 1.75, 2.0, 2.5 and 3.0 mm respectively. We also simulated a contrast phantom study with 6 hot sphere inserts (1.5, 2.0, 2.5, 3.0, 3.5 and 4.0 mm respectively in diameters) in a 50 mm (∅) × 10 mm (L) cylinder with a warm-background. The concentration ratio of all the hot spheres to the background is 5:1. We define the contrast-to-noise ratio (CNR) to quantitatively evaluate image quality. Projection data for phantom study at different counts levels were generated using forward projection and through sampling Poisson noise. OS-EM algorithm was used for image reconstruction with 300 subsets. We ran the reconstruction until convergence and then performed post-filtering with an empirically chosen Gaussian filter. Results: The peak and average detection efficiency in the full FOV is 0.54% and 0.47% respectively. The planar hot rod phantom study shows that the best achievable trans-axial image resolution is 1.25 mm in noise-free condition and 2.5 mm with 2.6 mCi Tc99m total activity and 5 min scan time. The smallest visible hot sphere in the contrast phantom study is 1.5 mm with a total activity of 2.6 mCi and 100 min scan. With 5 min acquisition, the 3.0 mm hot sphere is clearly visible. Conclusions: The preliminary result shows that the proposed self-collimating MATRICES SPECT design has the potential to yield superb whole-body imaging performance in terms of simultaneous, order-of-magnitude improvement of resolution and sensitivity, as well as excellent image contrast-to-noise performance. It is reasonable to expect a strong clinical application advancement with the self-collimating SPECT technology. Further investigations are on-going to fully characterize the system performance with Monte-Carlo simulations. Research Support: This research was supported by the National Natural Science Foundation of China (No. 81727807), National Key Research and Development (R&D) Plan of China (Grant ID. 2019YFF0302503) and Tsinghua University Initiative Scientific Research Program.

Derivation of System Matrix from Simulation Data for an Animal SPECT with Slit-Slat Collimator

Derivation Of The System Matrix For An Animal Spect Scanner With Rotational Collimator And Stationary Ring Detector

Analytical algorithm for system matrix based on Monte Carlo simulation

Feasibility Studies of Animal SPECT Imaging with a Stationary Multi-Pinhole Collimator Inserted to Animal PET Detector Ring

Accurate image reconstruction based on standard-Gaussian-model fitted system matrix in multipinhole small animal SPECT imaging

Accurate Image Reconstruction Based On Standard-Gaussian-Model Fitted System Matrix In Multi-Pinhole Small Animal Spect Imaging

Use of Monte Carlo Simulations for the Scatter Events Analysis of PET Scanners

Accurate Iterative Reconstruction in Multi-pinhole SPECT Based on Simulation Point Source Measurement

Image Reconstruction of a Dual-Head Small-Animal PET System by Using Monte-Carlo Computed System Response Matrix

Imaging Performance of a PET/SPECT Dual Modality Animal System

Slit-slat Collimator Geometrical Calibration for a PET/SPECT Dual Modality Animal Scanner

Acceleration of Fully 3D Monte Carlo Based System Matrix Computation for Image Reconstruction in Small Animal SPECT

Determination of Geometrical Parameters for Slit-Slat SPECT Imaging on MicroPET

Compensation of spatial system response in SPECT with conjugate gradient reconstruction technique

Performance Evaluation of Biograph Pet/Ct System Based on Monte Carlo Simulation

Efficient Monte-Carlo based system modelling for image reconstruction in preclinical pinhole SPECT

Geometrical Calibration for an Animal Pet Converted Spect

Accurate Monte Carlo Modeling of Small-Animal Multi-Pinhole SPECT for Non-Standard Multi-Isotope Applications

Design and Simulations of a Self-Collimating Whole-Body SPECT System

Theory and realization of a 2D high resolution and high sensitivity SPECT system with an angle-encoding attenuator pattern.

Accurate Image Reconstruction with Computed System Response Matrix for a High-Sensitivity Dual-Head PET Scanner