Abstract:The paper presents a new method to prepare waterborne anionic alkoxysilane-terminated polyurethane dispersion (SPUD) which is substantially free from organic solvent: the NCO-terminated polyurethane (PU) containing carboxylic ions in backbone is synthesized by melt polycondensation with toluene 2,4-diisocyanate (TDI), polypropylene oxide (PPO) and 2, 2-dimethylolbutanoic acid (DMBA), the terminal NCO groups are reacted with 3-aminopropyltriethoxylsilane (APTES) to give alkoxysilane-terminated PU (SPU), and the waterborne SPUD with higher aminosilane content (10 wt% in SPU) is obtained by phase-inversion emulsification with the aid of protective colloid (polyethermethylsiloxanes, PEMS) and external emulsifier (sodium dodecyl sulfate, SDS). The anionic PU and SPU are characterized by FT-IR, gel permeation chromatography (GPC), differential scanning calorimeter (DSC) and thermo-gravimetric analysis (TGA). The thermal studies show that SPU has lower T g than anionic PU as well as thermal stability. The effects of emulsifier, protective colloid, solid content and pH value on the storage stability of waterborne SPUD are investigated, respectively. The results indicate that the storage stability decreases with increasing viscosity and dispersing ratio, whereas particle size and polydispersity index (PDI) are hardly affected by the solid content, the amount of emulsifier and protective colloid. The SPUD prepared with about 2 wt% SDS, 5 wt% PEMS, 31 wt% solid content and pH value of 7 is stable for more than 6 months at 50 °C and 8 months at room temperature, while exhibiting excellent freeze-thaw stability. The corresponding cured films exhibit excellent mechanical properties with 19.2 MPa tensile strength and 320 % elongation at break.

Preparation and Properties of Siloxane End-Capped Polyurethane

Synthesis of CO2-Derived, Siloxane-Functionalized Poly(ether Carbonate)s and Waterborne Polyurethanes

Preparation and Properties of Silane End-Capped Polyurea

Synthesis and Characterization of Eugenol‐based Silicone Modified Waterborne Polyurethane with Excellent Properties

Alkoxysilane Functionalized Polyurethane/Polysiloxane Copolymers: Synthesis and the Effect of End-Capping Agent

Effect of Prehydrolysis VTMS on the Structure–Property of Silane‐Terminated Polyurethane

Synthesis of hydroxy silane coupling agent and the silane-terminated polyurethane chain-extended by butanediol

Preparation and Application of Siloxane-capped Polyurethane

The Effect of Silane Coupling Agent Containing Methacryloxy Group on UV-Curable Acrylate-Modified Polyurethane/SiO2 Hybrid Coatings

Silane-Modified Hyperbranched Polyurethane with High Strength, High Transparency, and Low Viscosity

Preparation and Surface Properties of Silicone-Modified Polyester-Based Polyurethane Coats

Effect of Plastifiers on Properties of Siloxane End-Capped Polyurethane Sealant

Synthesis and Properties of Triethoxysilane-Terminated Anionic Polyurethane and Its Waterborne Dispersions

Influence of Stiffness of Isocyanate on the Properties of Silane Modified Polyurea

Silane-terminated polyurethane applied to a moisture-curable pressure-sensitive adhesive using triethoxysilane

The Synthesis of Low-Viscosity Organotin-Free Moisture-Curable Silane-Terminated Poly(Urethane-Urea)s

The Synthesis and Properties of Moisture-curing Polyurethane/Polysiloxane Copolymers

Synthesis of A Novel Core-Shell Type Acrylic-Polyurethane Hybrid Emulsion Containing Siloxane and Fluorine As Well As Water and the Oil Resistances of Cured Film

Synthesis And Surface Property Of Siloxane-Modified Aqueous Polyurethane

Preparation and properties of waterborne siloxane-containing polyurethane for moisture permeable textile coating

Synthesis and Surface Properties of Dihydroxybutyl Terminated-Polydimethylsiloxane Modified Polyurethane