Abstract:This study was designed to prepare functionalized multiwalled carbon nanotubes (MWNTs-COOH) incorporated chitosan membrane for separation of ethanol/water mixtures by pervaporation. The pristine MWNTs were treated by mixed acid and then functionalized by diisobutyryl peroxide. The structure and property of the functionalized MWNTs were characterized by Fourier transform infrared and Raman spectroscopies and transmission electron microscopy. A series of functionalized MWNTs incorporated chitosan membranes were prepared by solution blending method. The swelling degree of the resulting membranes. in ethanol/water mixtures was 6 times that of the pristine chitosan membrane. The permeation flux of the membranes increased significantly with increasing functionalized MWNTs content in blend membrane matrix in pervaporation. On the basis of the experiments of sorption equilibrium, the solubility and the diffusion coefficient of membranes in water, ethanol, and 90% ethanol/water mixtures were obtained. Compared with the calculated diffusion coefficient (D-90), the measured diffusion coefficient (D-90(T)) in 90% ethanol/water mixtures was higher, taking M(2) for an example, D-90 was 0.193 x 10(-6) m(2)/s, and D-90(T) was 0.41 x 10(-6) m(2)/s, which indicated the functionalized MWNTs were more prone to increased water permeation when ethanol and water penetrated into the membrane simultaneously. In addition, effects of MWNTs content in the membrane matrix and operating temperature on pervaporation performances were investigated. After introducing functionalized MWNTs, the Arrhenius activation parameters for the total permeation decreased from 28.15 to 12.91 kJ/mol, which indicated that the carbon nanotubes filled membranes were easier to penetrate and exhibited higher flux performance than a pristine membrane.

Novel Nanocomposite Pervaporation Membranes Composed of Poly(Vinyl Alcohol) and Chitosan-Wrapped Carbon Nanotube

Influence of polyvinyl alcohol on the surface morphology, separation and anti-fouling performance of the composite polyamide nanofiltration membranes

Preparation and Pervaporation Property of Chitosan Membrane with Functionalized Multiwalled Carbon Nanotubes

Novel carbon nanotube/chitosan hybrid membranes for the separation of ethanol/water mixtures by pervaporation

Pervaporation Properties and Characterization of Poly (vinyl Alcohol)/Cellulose Nanocrystal Composite Membranes

Poly(Vinyl Alcohol)/Carbon Nanotube (cnt) Membranes for Pervaporation Dehydration: the Effect of Functionalization Agents for Cnt on Pervaporation Performance

Pervaporation Performance of Carbon Nanotube Filled PDMS Membranes

Pervaporation chitosan membranes modified with carbon nanoparticles for enhanced isopropanol dehydration

Poly (vinyl Alcohol)/Cellulose Nanocomposite Pervaporation Membranes for Ethanol Dehydration

Creation of water-permeation pathways with matrix-polymer functionalized carbon nanotubes in polymeric membranes for pervaporation desalination

Nanocomposite block copolymer membranes with enhanced permeance and robustness by carbon nanotube doping

Pervaporation characteristics of PDMS/PMHS nanocomposite membranes inclusive multi-walled carbon nanotubes for improvement of acetic acid–methanol esterification reaction

Preparation and Characterization of Pol(vinyl Alcohol）/ Cellulose Nanocomposites

Preparation of a PVA/Chitosan/Glass Fiber Composite Membrane and the Performance in CO2 Separation

Study of a New Pervaporation Membrane Part I. Preparation and Characteristics of the New Membrane

Pervaporation properties of a three-layer structure composite membrane

Chemically tailored microporous nanocomposite membranes with multi-channels for intensified solvent permeation

Pervaporation of Ethanol/water Mixtures by PDMS/PVDF Composite Membranes with High Permeability

Preparation and pervaporation performance of PVA membrane with biomimetic modified silica nanoparticles as coating

Chitosan/poly(tetrafluoroethylene) Composite Membranes Using in Pervaporation Dehydration Processes

Carbon nanotube composite membranes of brominated poly(2,6-diphenyl-1,4-phenylene oxide) for gas separation