Abstract:This study was designed to prepare functionalized multiwalled carbon nanotubes (MWNTs-COOH) incorporated chitosan membrane for separation of ethanol/water mixtures by pervaporation. The pristine MWNTs were treated by mixed acid and then functionalized by diisobutyryl peroxide. The structure and property of the functionalized MWNTs were characterized by Fourier transform infrared and Raman spectroscopies and transmission electron microscopy. A series of functionalized MWNTs incorporated chitosan membranes were prepared by solution blending method. The swelling degree of the resulting membranes. in ethanol/water mixtures was 6 times that of the pristine chitosan membrane. The permeation flux of the membranes increased significantly with increasing functionalized MWNTs content in blend membrane matrix in pervaporation. On the basis of the experiments of sorption equilibrium, the solubility and the diffusion coefficient of membranes in water, ethanol, and 90% ethanol/water mixtures were obtained. Compared with the calculated diffusion coefficient (D-90), the measured diffusion coefficient (D-90(T)) in 90% ethanol/water mixtures was higher, taking M(2) for an example, D-90 was 0.193 x 10(-6) m(2)/s, and D-90(T) was 0.41 x 10(-6) m(2)/s, which indicated the functionalized MWNTs were more prone to increased water permeation when ethanol and water penetrated into the membrane simultaneously. In addition, effects of MWNTs content in the membrane matrix and operating temperature on pervaporation performances were investigated. After introducing functionalized MWNTs, the Arrhenius activation parameters for the total permeation decreased from 28.15 to 12.91 kJ/mol, which indicated that the carbon nanotubes filled membranes were easier to penetrate and exhibited higher flux performance than a pristine membrane.

Pervaporation Properties and Characterization of Poly (vinyl Alcohol)/Cellulose Nanocrystal Composite Membranes

Poly (vinyl Alcohol)/Cellulose Nanocomposite Pervaporation Membranes for Ethanol Dehydration

Comprehensive Analysis on Anomalous Phenomenon of Ethanol-Soluble PVB Membrane for Ethanol Recovery Via Pervaporation

Effect of the Permeants/Polymer Interactions on the Pervaporative Separation Properties of the P(Vdf-Co-Hfp) Membrane

Preparation and characterization of polyelectrolyte complex membranes bearing alkyl side chains for the pervaporation dehydration of alcohols

Study on Pervaporation Membranes for Removing Methanol from C 5 or Methyl Tert-butyl Ether Mixtures

P(Vdf-Co-Hfp) Membrane for Recovery of Aroma Compounds from Aqueous Solutions by Pervaporation - I. Ethyl Acetate/Water System

Preparation and Characterization of Pol(vinyl Alcohol）/ Cellulose Nanocomposites

Vtos Cross-Linked Pdms Membranes for Recovery of Ethanol from Aqueous Solution by Pervaporation

Pervaporation Separation of Ethanol from Aqueous Solution by PDMS Membranes Crosslinked with VTES

Novel carbon nanotube/chitosan hybrid membranes for the separation of ethanol/water mixtures by pervaporation

Crosslinked poly(vinyl alcohol) membranes for separation of dimethyl carbonate/methanol mixtures by pervaporation

Preparation and Properties of Elliptic Leaves Silica/polyvinyl Alcohol Pervaporation Composite Membranes

Pervaporation of Ethanol/water Mixtures by PDMS/PVDF Composite Membranes with High Permeability

Progresses in the Modification and Application of Poly(vinyl Alcohol) Membrane

Preparation and Pervaporation Property of Chitosan Membrane with Functionalized Multiwalled Carbon Nanotubes

Pervaporation dehydration of ethanol by using polyelectrolyte complex membranes based on poly (N-ethyl-4-vinylpyridinium bromide) and sodium carboxymethyl cellulose

Study of a New Pervaporation Membrane Part I. Preparation and Characteristics of the New Membrane

Microporous Polypropylene Hollow Fiber Membranes Part Ii. Pervaporation Separation of Water/Ethanol Mixtures by the Poly(Acrylic Acid) Grafted Membranes

Pervaporation Performance of Carbon Nanotube Filled PDMS Membranes

Preparation and pervaporation performance of PVA membrane with biomimetic modified silica nanoparticles as coating