Electrochemical Allylation of Carbonyl Compounds in Aqueous Electrolyte Catalyzed by Zinc

Jing-Mei Huang,Hai-Rui Ren

DOI: https://doi.org/10.1039/b922897g

IF: 4.9

2010-01-01

Chemical Communications

Abstract:A highly efficient electroallylation of carbonyl compounds in aqueous electrolyte in a divided cell with a catalytic amount of zinc consumption is reported.

What problem does this paper attempt to address?

One-Pot, Solvent-Free Allylation or Propargylation of Carbonyl Compounds Mediated by the in situ Generated Zn-Ag Couple

Changquan Yu,Jian Yang,Lingjie Xia,Xiuyang Lu

2012-01-01

Asian Journal of Chemistry

Abstract:Zn-Ag couple which was in situ generated by zinc being oxidized with catalytic silver acetate was successfully applied to the one-pot and solvent-free allylation or propargylation of carbonyl compounds, in which high yields, regioselective addition, waste minimization and simple operation can be achieved.
An Efficient Electrochemical Method for the Paired Synthesis of Carbonyl Compounds and Homoallylic Alcohols in a Simple Home-Made Cell

Li Zhang,Zhenggen Zha,Zhiyong Wang

DOI: https://doi.org/10.1055/s-0030-1258504

2010-01-01

Synlett

Abstract:An efficient electrochemical synthesis of carbonyl compounds and homoallylic alcohols was developed in excellent yields using a simple home-made cell. The catalytic redox behavior of the electrode surface and the reaction mechanism was investigated by cyclic voltammetry (CV).
A Recyclable Electrochemical Allylation in Water.

Zhenggen Zha,Ailing Hui,Yuqing Zhou,Miao Qian,Zhiyong Wang,Hanchang Zhang

DOI: https://doi.org/10.1002/chin.200540093

2005-01-01

ChemInform

Abstract:For Abstract see ChemInform Abstract in Full Text.
Aqueous electrosynthesis of carbonyl compounds and the corresponding homoallylic alcohols in a divided cell

Li Zhang,Zhenggen Zha,Zhiyong Wang,Shengquan Fu

DOI: https://doi.org/10.1016/j.tetlet.2010.01.026

2010-01-01

ChemInform

Abstract:An aqueous paired electrosynthesis is studied in a divided cell. On graphite anode the generated Br2 oxidized alcohol to the corresponding carbonyl compounds while on graphite cathode Sn2+ was reduced to Sn0. Then the produced metallic tin mediated the allylation of the carbonyl compounds with allyl bromide to generate the corresponding homoallylic alcohol. In the reaction the mediators (Sn and Br2) were generated in situ and could be reused via the electrolysis. Both working electrode and the counter electrode were utilized to generate the products simultaneously without the sacrifice of electrode materials.
Stabilizing Zn Metal Anode by Interfacial Self-Assembled Zincophilic Metal-Organic Complex Conversion Layers

Yifei Yu,Quan Zong,Chaofeng Liu,Qilong Zhang,Zejie Zhu,Jiangying Wang,Jingji Zhang,Guozhong Cao

DOI: https://doi.org/10.1016/j.ensm.2024.103601

IF: 20.4

2024-01-01

Energy Storage Materials

Abstract:The reversibility and stability of aqueous Zn metal batteries is largely constrained by the wild Zn dendrites growth and sever side reactions. A stable electrode/electrolyte interface is a necessity for Zn anodes. In the present work, a metal-organic complex conversion layer (CCL) is in situ constructed on the Zn anode surface via the complexation effect through adding 30 mg L−1 2-Hydroxyphosphonoacetic acid (HPAA) in 2 M ZnSO4 electrolyte (ZnSO4+30 mg L−1 HPAA). Calculations and experiments reveal that a zincophilic HPAA-Zn layer is formed on the Zn anode surface by chemical adsorption of HPAA with P-OH group, which is in favor of providing even diffusion and distribution of zinc ions to promote uniform Zn deposition. The HPAA with abundant functional groups could also disrupt the hydrogen bond and reduce water activity to suppress the water-related side reactions. As a result, Zn||Zn symmetric cell using ZnSO4+30 mg L−1 HPAA electrolyte displays a stable Zn plating/stripping for 1200 h at 10 mA cm−2 and 1 mAh cm−2. A high average Coulombic efficiency of 99.8 % over 1000 cycles is achieved in corresponding Zn||Cu asymmetric cell. The Zn||NH4V4O10 full cell-based optimal electrolyte delivers a superior rate capability as well as an improved cycling stability over 1000 cycles.
Hydrotalcite-Like Materials As Catalyst for the Conjugate Addition of Amines to Electron Deficient Alkenes

Chen Lu,Zhu Juan,Wang Jian,Wu Haihong,Yang Jianguo

DOI: https://doi.org/10.1016/s1004-9541(08)60290-6

2009-01-01

Abstract:The novel efficient procedure has been developed for the conjugate addition of amines to electron deficient alkenes. A series of hydrotalcite-like materials were synthesized as catalyst for the conjugate addition of amines and alkenes. After optimizing the reaction conditions, ZnAl-LDHs (3 : 1) was chosen as the best catalyst for the reaction. The results showed that the catalyst worked very well for the conjugate addition of amines to electron deficient alkenes with the excellent yields in several minutes. Operational simplicity, no solvent, low cost of the catalyst, high yields, reusability, excellent chemoselectivity, wide applicability are the key features of this method.
A Highly Efficient Zinc Catalyst for Selective Electroreduction of Carbon Dioxide in Aqueous Nacl Solution

Fengjiao Quan,Dan Zhong,Hancheng Song,Falong Jia,Lizhi Zhang

DOI: https://doi.org/10.1039/c5ta04102c

IF: 11.9

2015-01-01

Journal of Materials Chemistry A

Abstract:A low-cost nanoscale zinc catalyst, prepared by a facile electrochemical strategy, exhibits high activity toward electrochemical reduction of CO2 to CO with up to 93% Faraday efficiency in aqueous NaCl solution.
Organometallic reactions in aqueous media: the allylations of carbonyl compounds mediated in Zn/CdSO4 and Zn/SnCl2 bimetal systems

Cunliu Zhou,Yuqing Zhou,Jiaoyang Jiang,Zhen Xie,Zhiyong Wang,Jiahai Zhang,Jihui Wu,Hao Yin

DOI: https://doi.org/10.1016/j.tetlet.2004.05.070

IF: 2.032

2004-01-01

Tetrahedron Letters

Abstract:Zn/CdSO4 and Zn/SnCl2 bimetal systems were employed in the allylations of aldehydes or ketones in distilled water to produce the corresponding homoallylic alcohols in good yield.
Efficient Allylation of Carbonyl Compounds Promoted by Phase Transfer Catalyst and Metal (sn or Zn) in Water

杨光,查正根,汪志勇

DOI: https://doi.org/10.3969/j.issn.0253-2778.2003.03.018

2003-01-01

Journal of University of Science and Technology of China

Abstract:The allylations of a variety of carbonyl compounds were carried out smoothly in the presence of phase transfer catalysts (PTC) when mediated by tin or zinc in distilled water, giving rise to the corresponding homoallylic alcohols in excellent yields. Particularly, for aryl aldehyde, the corresponding allylation products can be obtined quantatively.
Electrocatalytic Isomerization of Allylic Alcohols: Straightforward Preparation of Β-Aryl-ketones

Anding Li,Nan Zheng,Kai Guo,Zhongchao Zhang,Zhen Yang

DOI: https://doi.org/10.3390/catal12030333

IF: 3.9

2022-01-01

Catalysts

Abstract:Electrochemical synthesis has been rapidly developing over the past few years. Here, we report a practical and eco-friendly electrocatalytic isomerization of allylic alcohols to their corresponding carbonyl compounds. This reaction can be carried out in undivided cells without the addition of external chemical oxidants and metal catalysts. Moreover, this reaction features a broad substrate scope including challenging allylic alcohols bearing tri- and tetra-substituted olefins and affords straightforward access to diverse β-aryl-ketones. Mechanistic investigations suggest that the reactions proceed through a radical process. This study represents a unique example in which electrochemistry enables hydrogen atom transfer in organic allylic alcohol substrates using a simple organocatalyst.
CO Electroreduction Mechanism on Single-Atom Zn (101) Surfaces: Pathway to C2 Products

Yixin Wang,Ming Zheng,Xin Zhou,Qingjiang Pan,Mingxia Li

DOI: https://doi.org/10.3390/molecules28124606

IF: 4.6

2023-06-08

Molecules

Abstract:Electrocatalytic reduction of carbon dioxide (CO2RR) employs electricity to store renewable energy in the form of reduction products. The activity and selectivity of the reaction depend on the inherent properties of electrode materials. Single-atom alloys (SAAs) exhibit high atomic utilization efficiency and unique catalytic activity, making them promising alternatives to precious metal catalysts. In this study, density functional theory (DFT) was employed to predict stability and high catalytic activity of Cu/Zn (101) and Pd/Zn (101) catalysts in the electrochemical environment at the single-atom reaction site. The mechanism of C2 products (glyoxal, acetaldehyde, ethylene, and ethane) produced by electrochemical reduction on the surface was elucidated. The C-C coupling process occurs through the CO dimerization mechanism, and the formation of the *CHOCO intermediate proves beneficial, as it inhibits both HER and CO protonation. Furthermore, the synergistic effect between single atoms and Zn results in a distinct adsorption behavior of intermediates compared to traditional metals, giving SAAs unique selectivity towards the C2 mechanism. At lower voltages, the Zn (101) single-atom alloy demonstrates the most advantageous performance in generating ethane on the surface, while acetaldehyde and ethylene exhibit significant certain potential. These findings establish a theoretical foundation for the design of more efficient and selective carbon dioxide catalysts.

chemistry, multidisciplinary,biochemistry & molecular biology
Co/Zn Bimetallic Catalysis Enables Enantioselective Alkynylation of Isatins and Α-Ketoesters Using Terminal Alkynes

Rui-Zhi Huang,Zhan-Cai Ma,Yuan Huang,Yu Zhao

DOI: https://doi.org/10.1021/acs.joc.2c01369

2022-01-01

Abstract:We present herein a novel cobalt/zinc bimetallic catalysis system for the realization of an efficient and enantioselective alkynylation of isatins and α-ketoesters using terminal alkynes. By using a simple procedure with all commercially available catalysts, including cobalt bromide, a chiral bisphosphine ligand, and zinc triflate, a range of synthetically useful tertiary propargylic alcohols are accessed with high yields and good enantioselectivities. Control reactions showed that this catalytic system proceeds through activation of the terminal alkyne by zinc triflate and a base, transmetalation from zinc to cobalt, and then the enantio-determining alkynylation of ketones.
Chemical and electrochemical synergistic weaving stable interface enabling longevous zinc plating/stripping process

Xuemei Zhang,Hang Luo,Yi Guo,Changhaoyue Xu,Yan Deng,Zhiwen Deng,Yiguo Zhang,Hao Wu,Wenlong Cai,Yun Zhang

DOI: https://doi.org/10.1016/j.cej.2023.141305

IF: 15.1

2023-01-11

Chemical Engineering Journal

Abstract:Dendrites growth and hydrogen evolution reaction of Zn anode greatly hinder the practical application of aqueous zinc ion batteries. Interface engineering strategies have attracted immense interest in addressing these challenges. Herein, a chemical and electrochemical method is proposed to synergistically weave a stable interface by introducing AgNO 3 additive in conventional aqueous ZnSO 4 electrolyte. The formed compact Ag layer acts as zincophilic sites, which is beneficial for zinc ion nucleation and growth. Consequently, the cell cycled in 2 M ZnSO 4 with 3 mM AgNO 3 electrolyte exhibits much more stable electrochemical properties than its counterpart. To be specific, the Zn || Zn half cell using the electrolyte with 3 mM AgNO 3 shows reversible Zn plating/stripping behavior over 1350 h at 5.0 mA cm −2 with an ultra-low potential hysteresis. Moreover, Zn || V 2 O 5 full cell using the electrolyte with 3 mM AgNO 3 exhibits glorious rate capability and more stable cycling performance, attributing to the inhibited zinc dendrites growth by the weaved interfacial layer. This work sheds new light on improving the electrochemical performance of rechargeable batteries.
Zinc: A Promising Material for Electrocatalyst-Assisted Microbial Electrosynthesis of Carboxylic Acids from Carbon Dioxide.

Yong Jiang,Na Chu,Wei Zhang,Junjun Ma,Fang Zhang,Peng Liang,Raymond Jianxiong Zeng

DOI: https://doi.org/10.1016/j.watres.2019.04.053

IF: 12.8

2019-01-01

Water Research

Abstract:Microbial electrosynthesis (MES) has been proposed as a sustainable platform to simultaneously achieve wastewater treatment, renewable energy generation and chemicals production. Currently, the CO2 valorization via MES is restricted by the low production rate, while that via electrochemical reduction is limited by the production of C1 products with high efficiency and selectivity. The electrocatalyst-assisted MES could potentially solve these bottlenecks of both MES and electrochemical reduction technology by increasing the production rate and expanding the product range. Here, four types of metals were evaluated for mixed culture-based, electrocatalyst-assisted MES with the fabrication of electrical-biological hybrid cathodes. Cathodes based on In, Zn, Ti and Cu showed high parallelism at 30 A/m2. However, no parallelism was observed at 50 A/m2, and only Zn experienced a further increase of the maximum acetic acid production rate (1.23 ± 0.02 g/L/d, 313 ± 5 g/m2/d) and titer (9.2 ± 0.1 g/L), with the highest value of the production rate normalized to the project area of the fiber cathodes. Other volatile fatty acids and ethanol were below 0.5 g/L. Moreover, it was the sharp H2 generation, which mainly caused the fluctuation of coulombic efficiency. The application of such Zn-based electrical-biological hybrid system shall provide a more efficient route for CO2 valorization.
Electrochemical interface reconstruction to eliminate surface heterogeneity for dendrite-free zinc anodes

Zefang Yang,Qi Zhang,Chunlin Xie,Yihu Li,Wenbin Li,Tingqing Wu,Yougen Tang,Haiyan Wang

DOI: https://doi.org/10.1016/j.ensm.2022.02.022

IF: 20.4

2022-05-01

Energy Storage Materials

Abstract:Metallic zinc anodes have attracted growing interest for aqueous rechargeable batteries owing to their high theoretical capacity and low cost. However, the practical application of zinc anodes is limited by the low Coulombic efficiency resulted from the irrepressible dendrite growth. Herein, we prove that the dendrite formation under low current density is mainly controlled by the surface heterogeneity. According to this fundamental principle, a facile electrochemical interface reconstruction method is proposed to uniformize zinc deposition and dissolution by initial electrostripping activation under high current density, which can effectively eliminate the influence of surface heterogeneity. The reconstructed zinc anode shows highly reversible stripping/plating behavior and significantly enhanced cycling stability in both symmetric and full cells. Moreover, the zinc-ion hybrid capacitor can steady operate for 8000 cycles with 96% capacity retention after one-step electrochemical reconstruction at an optimal current density based on its rapid charging-discharging ability

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology
Stable Zinc Metal Anodes with Textured Crystal Faces and Functional Zinc Compound Coatings

Xia Wang,Junping Meng,Xuguang Lin,Yadi Yang,Shuang Zhou,Yaping Wang,Anqiang Pan

DOI: https://doi.org/10.1002/adfm.202106114

IF: 19

2021-09-01

Advanced Functional Materials

Abstract:The uneven electrodeposition and inferior corrosion resistance are the fundamental obstacles to achieve stable Zn metal anodes. The features of the electrode surface/interface are closely correlated with the properties. Herein, the Zn surface with more exposed (002)Zn planes is modified through a simple acid-etching approach. The in situ generated zinc compounds form an interface layer with strong adhesion to the Zn electrode, which can enhance the Zn2+ ion kinetics and regulate the deposition/dissolution behaviors. A variety of acids with functional cations are selected, among which the phosphoric acid etches the Zn with a higher extent of texturing and generates a more compact layer. The obtained zinc phosphate@Zn electrode enables stable cycling and fast kinetics in symmetrical and full Zn metal batteries. This study provides a new example of combined surface and interface modification toward high-performance aqueous zinc metal anodes.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Boosting Electrochemical CO2 Reduction Via Surface Hydroxylation over Cu-Based Electrocatalysts

Congcong Li,Zhongyuan Guo,Zhongliang Liu,Tingting Zhang,Haojun Shi,Jialin Cui,Minghui Zhu,Ling Zhang,Hao Li,Huihui Li,Chunzhong Li

DOI: https://doi.org/10.1021/acscatal.3c02454

IF: 12.9

2023-01-01

ACS Catalysis

Abstract:Electrochemical CO2 reduction (CO2R) to valuable multicarbon (C2+) products is an attractive means for upgrading waste CO2. One of the intensively studied strategies is to apply concentrated KOH solution to extensively proceed with CO2R to C2+ products; however, the undesired carbonate formation at the cathode consumes majority of the input CO2. Therefore, it is crucial to seek a new strategy to improve the local environment at the electrode and thus eliminate or reduce dependence of the selectivity of CO2R on bulk OH- concentration. However, tailoring a stable surface hydroxylation reaction microenvironment near the catalyst surface throughout the extended CO2R operation process is still a challenge. Here, we implement the concept of molecular surface modification experimentally by applying a hydroxyl-functionalized surface strategy (i.e., capping hydroxyl-rich molecules over a set of Cu2O catalysts) to enhance the formation of C2+ products. Electrochemical experiments and operando characterizations confirm the stable presence of hydroxyl species near the catalyst surface during the CO2R operation and its advantage in converting absorbed *CO into C2+ products. As a result, the Faradaic efficiency of C2+ products of 81.5% and the cathodic energy efficiency of 43.1% were achieved with a partial current density of 285 mA cm(-2) in a flow cell. Using a cation-exchange membrane electrode assembly device, we demonstrated the stable production of ethylene over 100 h at an average current density of 151 mA cm(-2). Theoretical analyses also show that hydroxyl-rich molecules such as gluconic acid can lead to the electron loss of the Cu sites, which is beneficial for *CO adsorption and thus the formation of C2+ products. Our results reveal the significance of tailoring a stable local reaction microenvironment over the catalyst surface in an electrochemical system.
Highly efficient zinc electrode prepared by electro-deposition in a salt-induced pre-phase separation region solution

Yaoyu Yin,Yaguang Peng,Meng Zhou,Pei Zhang,Yingying Cheng,Peng Chen,Xueqing Xing,Xiaoxue Ma,Qinggong Zhu,Xiaofu Sun,Qingli Qian,Xinchen Kang,Buxing Han

DOI: https://doi.org/10.1016/j.scib.2023.08.042

IF: 18.9

2023-08-01

Science Bulletin

Abstract:Efficient electrode design is crucial for the electrochemical reduction of CO2 to produce valuable chemicals. The solution used for the preparation of electrodes can affect their overall properties, which in turn determine the reaction efficiency. In this work, we report that transition metal salts could induce the change of two-phase ionic liquid/ethanol mixture into miscible one phase. Pre-phase separation region near the phase boundary of the ternary system was observed. Zinc nanoparticles were electro-deposited along the fibres of carbon paper (CP) substrate uniformly in the salt-induced pre-phase separation region solution. The as-prepared Zn(1)/CP electrode exhibits super-wettability to the electrolyte, rendering very high catalytic performance for CO2 electro-reduction, and the Faradaic efficiency towards CO is 97.4% with a current density of 340 mA cm-2, which is the best result to date in an H-type cell.

multidisciplinary sciences
Asymmetric Lewis Acid Catalyzed Electrochemical Alkylation

Qinglin Zhang,Xihao Chang,Lingzi Peng,Chang Guo

DOI: https://doi.org/10.1002/anie.201901801

2019-01-01

Angewandte Chemie

Abstract:Lewis-acid catalysis and electrochemistry represent two powerful fields that have found widespread application in organic chemistry. Reported herein is an asymmetric electrosynthesis in combination with a chiral Ni catalyst leading to an intermolecular alkylation reaction in good yields with excellent enantioselectivities (up to 97% ee). Mechanistic studies suggest that the Lewis-acid-bound radical intermediate from a single-electron anodic oxidation selectively reacts with the benzylic radical species to generate the desired adducts.
Zinc-mediated allylation of carbon dioxide—the LiOAc effect

bukeyan miao,shengming ma

DOI: https://doi.org/10.1039/c4qo00300d

IF: 5.456

2015-01-01

Organic Chemistry Frontiers

Abstract:A direct carboxylation reaction of allylic bromides mediated by zinc powder has been developed. The reaction occurred smoothly at room temperature with 1 atm of CO2 provided by a balloon. The reaction was conducted in the presence of LiOAc giving excellent yields. An excellent branched regioselectivity was observed and the reaction was easily scaled-up to 10 gram-scale.

Electrochemical Allylation of Carbonyl Compounds in Aqueous Electrolyte Catalyzed by Zinc

One-Pot, Solvent-Free Allylation or Propargylation of Carbonyl Compounds Mediated by the in situ Generated Zn-Ag Couple

An Efficient Electrochemical Method for the Paired Synthesis of Carbonyl Compounds and Homoallylic Alcohols in a Simple Home-Made Cell

A Recyclable Electrochemical Allylation in Water.

Aqueous electrosynthesis of carbonyl compounds and the corresponding homoallylic alcohols in a divided cell

Stabilizing Zn Metal Anode by Interfacial Self-Assembled Zincophilic Metal-Organic Complex Conversion Layers

Hydrotalcite-Like Materials As Catalyst for the Conjugate Addition of Amines to Electron Deficient Alkenes

A Highly Efficient Zinc Catalyst for Selective Electroreduction of Carbon Dioxide in Aqueous Nacl Solution

Organometallic reactions in aqueous media: the allylations of carbonyl compounds mediated in Zn/CdSO4 and Zn/SnCl2 bimetal systems

Efficient Allylation of Carbonyl Compounds Promoted by Phase Transfer Catalyst and Metal (sn or Zn) in Water

Electrocatalytic Isomerization of Allylic Alcohols: Straightforward Preparation of Β-Aryl-ketones

CO Electroreduction Mechanism on Single-Atom Zn (101) Surfaces: Pathway to C2 Products

Co/Zn Bimetallic Catalysis Enables Enantioselective Alkynylation of Isatins and Α-Ketoesters Using Terminal Alkynes

Chemical and electrochemical synergistic weaving stable interface enabling longevous zinc plating/stripping process

Zinc: A Promising Material for Electrocatalyst-Assisted Microbial Electrosynthesis of Carboxylic Acids from Carbon Dioxide.

Electrochemical interface reconstruction to eliminate surface heterogeneity for dendrite-free zinc anodes

Stable Zinc Metal Anodes with Textured Crystal Faces and Functional Zinc Compound Coatings

Boosting Electrochemical CO2 Reduction Via Surface Hydroxylation over Cu-Based Electrocatalysts

Highly efficient zinc electrode prepared by electro-deposition in a salt-induced pre-phase separation region solution

Asymmetric Lewis Acid Catalyzed Electrochemical Alkylation

Zinc-mediated allylation of carbon dioxide—the LiOAc effect