Abstract:Abstract Background The digital cadmium–zinc–telluride (CZT)-based SPECT system has many advantages, including better spatial and energy resolution. However, the impacts of different acquisition and reconstruction parameters on CZT SPECT quantification might still need to be validated. This study aimed to evaluate the impacts of acquisition parameters (the main energy window and acquisition time per frame) and reconstruction parameters (the number of iterations, subsets in iterative reconstruction, post-filter, and image correction methods) on the technetium quantification of CZT SPECT/CT. Methods A phantom (PET NEMA/IEC image quality, USA) was filled with four target-to-background (T/B) ratios (32:1, 16:1, 8:1, and 4:1) of technetium. Mean uptake values (the calculated mean concentrations for spheres) were measured to evaluate the recovery coefficient (RC) changes under different acquisition and reconstruction parameters. The corresponding standard deviations of mean uptake values were also measured to evaluate the quantification error. Image quality was evaluated using the National Electrical Manufacturers Association (NEMA) NU 2–2012 standard. Results For all T/B ratios, significant correlations were found between iterations and RCs ( r = 0.62–0.96 for 1–35 iterations, r = 0.94–0.99 for 35–90 iterations) as well as between the full width at half maximum (FWHM) of the Gaussian filter and RCs ( r = − 0.86 to − 1.00, all P values < 0.05). The regression coefficients of 1–35 iterations were higher than those of 35–90 iterations (0.51–1.60 vs. 0.02–0.19). RCs calculated with AC (attenuation correction) + SC (scatter correction) + RR (resolution recovery correction) combination were more accurate (53.82–106.70%) than those calculated with other combinations (all P values < 0.05). No significant statistical differences (all P values > 0.05) were found between the 15% and 20% energy windows except for the 32:1 T/B ratio ( P value = 0.023) or between the 10 s/frame and 120 s/frame acquisition times except for the 4:1 T/B ratio ( P value = 0.015) in terms of RCs. Conclusions CZT-SPECT/CT of technetium resulted in good quantification accuracy. The favourable acquisition parameters might be a 15% energy window and 40 s/frame of acquisition time. The favourable reconstruction parameters might be 35 iterations, 20 subsets, the AC + SC + RR correction combination, and no filter.

Improve the Quality of SPECT Images Through Different Function Reconstruction and Matrix Sizes

[Analytical Algorithms Improving the Reconstruction of SPECT Image].

Evaluation of imaging protocol for ECT based on CS image reconstruction algorithm

An Integrated Framework of Projection and Attenuation Correction for Quantitative SPECT/CT Reconstruction

A novel reconstruction method combining multi-detector SPECT with an elliptical orbit and computer tomography for cardiac imaging

The effect of different reconstruction algorithms on the image quality of SPECT Hoffmann phantom

Image Reconstruction in 3D Short-Scan SPECT

Accurate Iterative Reconstruction in Multi-pinhole SPECT Based on Simulation Point Source Measurement

Clinical Investigation of an Improved Iterative Reconstruction Algorithm in SPECT Myocardial Perfusion Imaging

Super-resolution acquisition and reconstruction for cone-beam SPECT with low-resolution detector

Impacts of acquisition and reconstruction parameters on the absolute technetium quantification of the cadmium–zinc–telluride-based SPECT/CT system: a phantom study

Accurate Image Reconstruction Based On Standard-Gaussian-Model Fitted System Matrix In Multi-Pinhole Small Animal Spect Imaging

Development Of Stationary Dedicated Cardiac Spect With Multi-Pinhole Collimators On A Clinical Scanner

Impacts of different reconstruction methods on the image quality of cadmium-zinc-telluride-based single photon emission computed tomography/computed tomography pulmonary perfusion imaging

High resolution reconstruction for optimization of imaging quality of GE Discovery CT 750 HD

The Evaluation of Results of Applying Quality Tests for SPECT, Γ-Camera and Scanner

Accurate image reconstruction based on standard-Gaussian-model fitted system matrix in multipinhole small animal SPECT imaging

A Monte Carlo study for optimizing the detector of SPECT imaging using a XCAT human phantom

Analytical Considerations of Photon Attenuation and System Response Function in SPECT Reconstruction.

Multiple Reconstructions with Different Data Quality for a Single Scan Using Kernel Method in Digital PET

Improvement of Whole-body Bone Planar Images on a Bone-dedicated Single-photon Emission Computed Tomography Scanner by Blind Deconvolution Algorithm