Abstract:The electrochemical reduction of CO2 to produce high-value multicarbon products represents a challenging yet highly desirable process, particularly due to the inefficient C-C coupling observed in current electrocatalysts. In this study, Cu2+ and Co2+ were introduced into ZIF-8 as precursors to synthesize a series of Co- and CuCo-doped carbon nanostructure materials with varying Co-to-Cu ratios. X-ray diffraction and X-ray photoelectron spectroscopy (XPS) analyses confirmed the successful doping of metal Co in the form of Co-N-x, while Cu was partly doped as nanoparticles attached to the carbon substrate surface and partly as single atoms forming Cu-N-x. Transmission electron microscopy and energy-dispersive X-ray spectroscopy analyses revealed uniform distribution of elemental Co and Cu on the carbon substrate, with Cu loaded as nanocluster on the surface. Linear sweep voltammetry tests indicated that Cu/CoCu-N-x-C composites exhibited enhanced reactivity toward CO2 reduction compared to other samples. At -0.19 V (vs RHE), the Faradaic efficiencies (FEs %) of C2H4, C2H6, CH4, CO, and H-2 over Cu/CoCu-N-x-C were 29.7, 8.6, 20.2, 9.8, and 31.5%, respectively. The influence of Co and Cu doping modes on the selectivity of electrocatalytic reduction products was investigated. Results showed that Cu/CoCu-N-x-C exhibited a higher FE of C-2 compared to Cu/Cu-N-x-C, with nearly 10 times higher C-2 current density. Mechanistic insights from acid-etching experiments and XPS revealed a synergistic interaction between metallic Co and Cu, promoting the generation of multicarbon products. Co-N-x improved *CO coverage, facilitating subsequent C-C coupling on neighboring Cu-N-x. Additionally, CH4 production was attributed to the (111) crystalline facets in the Cu nanocluster and isolated Cu-N-x. Overall, this research provides an important understanding of the creation of straightforward and effective catalysts for the reduction of CO2. It holds considerable potential for the production of hydrocarbons using carbon dioxide.

In Situ Synthesis of Carbon Onion/Nanotube Reinforcements in Copper Powders

Simple and Efficient Preparation of Uniformly Dispersed Carbon Nanotubes Reinforced Copper Matrix Composite Powders by in Situ Chemical Vapor Deposition Without Additional Catalyst

In-situ synthesis of high-quality carbon nanotubes on Cu powder by constructing an Al2O3 barrier layer

Synthesis of uniformly dispersed carbon nanotube reinforcement in Al powder for preparing reinforced Al composites

Preparation of CNT/Cu Nano Composite Powder with Uniform Dispersion and Strong Interface Bonding by SP Method

Synthesis of Cobalt nanowires by in-situ Environmental TEM

Novel Synthesizing and Characterization of Copper Matrix Composites Reinforced with Carbon Nanotubes

Synergistic Optimization of Properties in Carbon Nanotubes Reinforced Cu Matrix Composites Prepared by Co-Deposition

Fabrication of CNT/Cu Based Composite with Twice In-Situ Formation from Powder Preparation to Sintering

Fabrication of Copper Matrix Composites Reinforced with Carbon Nanotubes Using an Innovational Self-Reduction Molecular-Level-Mixing Method

A Novel Preparation and Properties of In-Situ Grown Carbon Nanotube Reinforced Carbon/carbon Composites

In-situ Synthesis of Graphene Nanosheets Coated Copper for Preparing Reinforced Aluminum Matrix Composites

Achieving highly dispersed nanofibres at high loading in carbon nanofibre-metal composites.

Flame In Situ Synthesis of Metal-Anchored CuO Nanowires for CO Catalytic Oxidation and Kinetic Analysis

In‐situ Growth of Bamboo‐like Carbon Nanotubes from Cu Catalyst on Continuous Carbon Fibre for Interfacial Enhancement

Fabrication of CNTs Reinforced Copper Composite Powders by Electrochemical Co-Deposition

Enhancement of mechanical properties and conductivity in carbon nanotubes (CNTs)/Cu matrix composite by surface and intratube decoration of CNTs

Copper/Cobalt-Loaded Carbon Nanostructures As Catalysts for Electrochemical CO2 Reduction

A Study of Silver Decoration on Carbon Nanotubes via Ultrasonic Chemical Synthesis and Their Reinforced Copper Matrix Composites

Enhancing the Strength of Carbon Nanotubes Reinforced Copper Matrix Composites by Optimizing the Interface Structure and Dispersion Uniformity

In-situ Homogeneous Synthesis of Carbon Nanotubes on Aluminum Matrix and Properties of Their Composites