Abstract:We present a fiber-optic sensor based on a fiber Bragg grating (FBG) whose core has an offset to that of the lead-in fiber from splicing for simultaneous refractive index (RI) and temperature measurement. Due to the core offset, the core mode in the lead-in fiber is coupled to both the core mode and the cladding modes of the sensing fiber with the FBG. Then the two oppositely propagating code modes, the cladding modes, and the core modes are coupled by the FBG at particular wavelengths determined by the effective indices of the modes and the FBG structure, resulting in two peaks in the FBG reflection spectrum. The peak wavelength corresponding to the core-cladding mode coupling is sensitive to both RI and temperature, while the peak wavelength corresponding to the core-core mode coupling is only sensitive to temperature. Utilizing the difference of two reflection peaks of these coupling modes, both RI and temperature can be detected simultaneously. We fabricate and characterize a sensor. The preliminary experimental results show that it can detect the refractive index in a range of 1.33 to 1.4421, with a temperature sensitivity of 10 pm/degrees C. (C) The Authors. Published by SPIE under a Creative Commons Attribution 3.0 Unported License. Distribution or reproduction of this work in whole or in part requires full attribution of the original publication, including its DOI. [DOI: 10.1117/1.OE.52.2.024402]

Measurement of Refractive Index Change of Optical Fiber Core Induced by Femtosecond Laser Scanning

Measurement of In-Fiber Refractive Index Change Using a Mach–Zehnder Interferometer

Measurement of the Group Refractive Index of Bulk Material Using White-Light Spectral Interferometry

Simple method of direct measurement of refractive index change in fiber grating fabrication

Applicability of the Focusing Method to Measure the Refractive Index Profile of Polymer Optical Fibers

Femtosecond laser-inscribed fiber interface Mach–Zehnder interferometer for temperature-insensitive refractive index measurement

Simultaneous Measurement of Refractive Index and Temperature Using a Mach-Zehnder Interferometer with Forward Core-Cladding-core Recoupling

Optical Fiber Index Taper–Theoretical Analysis and Experiment Demonstration

Note: an in Situ Method for Measuring the Non-Linear Response of a Fabry-Perot Cavity.

Research advance of measurement of thermo-physical property of micro-nano material with femtosecond laser

Different refractive index change behavior in borosilicate glasses induced by 1 kHz and 250 kHz femtosecond lasers [Invited]

Refractive Index Sensor Based on No-Core Fiber With Optoelectronic Oscillator Interrogation

Characterization of refractive index change and fabrication of long period gratings in pure silica fiber by femtosecond laser radiation

Fiber Mach–Zehnder Interferometers Fabricated by Nanosecond Pulses and Applications in Refractive Index Sensing

Multi-Point Fiber-Optic Refractive Index Sensor by Using Coreless Fibers

Sensitive refractive index sensor based on an assembly-free fiber multi-mode interferometer fabricated by femtosecond laser

The pulse duration dependence of femtosecond laser induced refractive index modulation in fused silica

Review of femtosecond laser machining technologies for optical fiber microstructures fabrication

Review of femtosecond laser direct writing fiber-optic structures based on refractive index modification and their applications

Simultaneous Measurement of Temperature and Refractive Index Using an Exposed Core Microstructured Optical Fiber

Core-Offset-Based Fiber Bragg Grating Sensor for Refractive Index and Temperature Measurement