Abstract:CaO-Al2O3-SiO2 system (CAS) glass-ceramics with anorthite crystal structure was prepared by melt-method. Its microstructure and morphology were characterized by differential thermal analysis (DTA), X-ray diffraction (XRD) and scanning electron microscope (SEM). The effects of TiO2 content on the relationship between microstructure and mechanical properties for the CAS glass-ceramics were also investigated by electron paramagnetic resonance (EPR) and the position annihilation technique (PAT). The results showed that the TiO2 content does not affect the type of the main crystalline phase of CAS glass-ceramics, but it could reduce the crystallization peak temperature and promote the crystallization. The relationship between g factor and bending strength showed that during the melting and heat-treatment process, part of the Ti4+ ions were reduced to Ti3+ and formed oxygen vacancies, the spin angular correlation between Ti3+-O-Ti3+ and oxygen vacancies affected the bending strength directly. The relationship between positron lifetime and bending strength showed that interval Ti4+ could make some defects and Al, Si vacancies, which could affect the mechanical properties. Electrostatic interaction between Ti4+ and O2- could make the independent oxonium ion into an integral, which was favourable to bending strength. When the TiO2 content was higher than 6%, some Si4+ were substituted by Ti4+, and the Ti-O bond was weaker than the Si-O bond, which led to a decrease in bending strength. When the content was 6%, the microhardness was 830 MPa, and the bending strength was 314 MPa in the heat treatment conditions of nucleation temperature 750°C, nucleation time 2 h, crystallization temperature 950°C, crystallization time 2 h.

Microstructure and Properties of SiO2-doped High Pure Beryllium Oxide Ceramics

Optimization of Microstructure to Improve Si3n4 Ceramics with Thermal Conductivity and Mechanical Properties: Effect of Si and Α-Si3n4 Powder Composition

Effects of Sintering Techniques on the Microstructure and Performance of High Purity Beryllium Oxide Ceramics

Study on Sintering Additive for High Purity Beryllium Oxide Ceramics with High Thermal Conductivity

Effect of SiO2 content on the sintering kinetics, microstructures and properties of BaO-Al2O3-B2O3-SiO2 glass-ceramics for LTCC application

Microstructure, Thermal, Mechanical, and Dielectric Properties of BaO–CaO–Al2O3–B2O3–SiO2 Glass-Ceramics

The Influence of Rare Earth Dopants upon Properties of High Purity Beryllium Oxide Ceramics

Effect of Er2O3/MgO ratio on mechanical and thermal properties of Si3N4 ceramics

Effect of B2O3/SiO2 Ratio on the Properties of BaO-B2O3-SiO2 Glass-ceramics

Microstructure and Properties of ZrO 2 -, TiO 2 -Doped Ca–Si–B Based Ceramics

Low Temperature Sintering and Dielectric Properties of Ca- Ba-Al-B-Si-O Glass/Al_2 O_3 Composites for LTCC Applications

Studies on the Sintering Process of High Pure BeO Ceramics with High Thermal Conductivity

Effect of SiO2/BaO ratio on sintering behavior, crystallization behavior, and properties of SrO–BaO–B2O3–SiO2 glass-ceramics

Effects of B2O3 content on crystallization behavior and properties of low temperature co-fired CaO-B2O3-SiO2 glass-ceramics

Microstructure and microwave dielectric properties of CaO-B2O3-SiO2 glass ceramics with various B2O3 contents

Microstructure and mechanical properties of the CaO-Al2O3-SiO2 system glass-ceramics

Effects of B2O3 Contents on Crystallization Behaviors and Dielectric Properties of CaO-B2O3-SiO2 Glass Ceramics

Influence of B2O3 on Dielectric, Mechanical, and Thermal Properties of MgO-Al2O3-SiO2 Glass-Ceramics

Effect of Different Forms of Silica on Sintering, Microstructure and Properties of Borosilicate Glass/al2o3 Composites

Sintering Characteristics, Microstructures and Dielectric Properties of Borosilicate-Based Glass/alpha-Al2o3 Composites for LTCC Application with Different MgO and Na2O Contents

Densification and Dielectric Properties of CaO–B2O3–SiO2 System Glass Ceramics