Abstract:A novel low-volatile starlike aliphatic polyamine with extraordinarily high –NH2 functionalities, N,N,N′,N′,N′′-penta(3-aminopropyl)-diethylenetriamine (PADT), is synthesized and its molecular structure is confirmed by the FTIR, 1H NMR and ESI-MS analysis. Then PADT is employed as the curing agent for the epoxy resin of diglycidyl ether of bisphenol A (DGEBA) and the isothermal reaction of DGEBA/PADT is systematically investigated with differential scanning calorimetry (DSC) according to the model-fitting approach and model-free advanced isoconversional method developed by Vyazovkin. The result shows that PADT possesses the high reactivity and the reaction is autocatalytic in nature. The further reaction kinetic analysis indicates that the Kamal model can well fit the reaction rate at the reaction-controlled stage, whereas the extended Kamal model with a diffusion term can provide an excellent match throughout the isothermal reaction. On the other hand, the model-free kinetic analysis reveals a strong dependence of effective activation energy, Eα, on fractional conversion, α, which could mirror the drastic change of the reaction mechanisms, in particular, the rapid drop in Eα observed in the deep-conversion regime due to the diffusion-controlled reaction kinetics. Then, a dynamic mechanical analysis (DMA) of the cured DGEBA/PADT network discloses three relaxations from the low- to high-temperature range: β (Tβ=−34.4°C), α′ (Tα′=68.0°C) and α (Tg=144.3°C). Moreover, compared to linear propanediamine, PADT can much increase the crosslink density and glass temperature of the cured epoxy resin. Finally, the thermogravimetric (TG) analysis reveals PADT, like propanediamine, can impart the cured epoxy resin with the excellent thermal stability with the initial decomposition temperature as high as ∼300°C. On the basis of these experimental data, we can conclude that PADT exhibits a great potential to partially replace conventional high-volatile aliphatic-amine curing agents of low molecular weights.

Low‐temperature Curing of Water‐dispersible Cationic Diisocyanates for Cathodic Electrodeposition Coatings

Preparation and Surface Characteristics of Low-Temperature Curing Fluorinated Cathodic Electrodeposition Coating

Branched 1,6-Diaminohexane-derived Aliphatic Polyamine As Curing Agent for Epoxy: Isothermal Cure, Network Structure, and Mechanical Properties

Preparation and Corrosion Resistance of Cathodic Electrodeposition Coating Containing Fluorinated Acrylic Ester

Studies on Cure Kinetics of Diglycidyl Ether of 4,4′-Bisphenol/4,4′-diaminobiphenyl Using the Advanced Isoconversional Method

Synthesis and Application of Cationic Blocked Diisocyanates as Crosslinker for Cathodic Electrodeposition Coatings

Preparation, Curing Kinetics, and Properties of a Novel Low-Volatile Starlike Aliphatic-Polyamine Curing Agent for Epoxy Resins

The Curing Behavior and Properties of Diglycidyl Ether of 4,4′-Bis(4-hydroxybenzoyloxy)-3,3′,5,5′-tetramethylbiphenyl and Its Composites with Multi-Wall Carbon Nanotubes

Studies on the Phase Separation of Poly(Ether Imide)‐Modified Cyanate Ester Resin

Pathways of Decreasing Cured Temperature of Cathodic Electrodeposition Coating

Preparation and Properties of Hydroxyl-Terminated Cationic Waterborne Polyurethanes for Cathodic Electrodeposition Coatings

A latened catalytic strategy for low cure thermoset powder coating by post-dry-blending technique

Preparation of an In-Situ Crosslinked Polymer Coating and A Double-Layered Thermal Ctp Plate

Amide-Functionalized Ionic Liquids As Curing Agents for Epoxy Resin: Preparation, Characterization, and Curing Behaviors with TDE-85

Effects of Dibenzocrown Ether and Diphenoxyethylene Diether Structural Units on the Properties of Degradable Polyhexahydrotriazine Thermosetting Resins

TiC Doped Palladium/nickel Foam Cathode for Electrocatalytic Hydrodechlorination of 2,4-DCBA: Enhanced Electrical Conductivity and Reactive Activity

Novel Dibutyltin Oxide–tributyl Phosphate Condensate As Accelerator for the Curing of the Epoxy Resin/4,4′‐diamino Diphenyl Sulfone System. I. Chemical Reactions and Properties of the Cured Resin

High Performance Epoxy Resin with Ultralow Coefficient of Thermal Expansion Cured by Conformation-Switchable Multi-Functional Agent

Surface Iodination: A Simple and Efficient Protocol to Improve the Isotropically Thermal Conductivity of Silver-Epoxy Pastes

Low‐temperature‐curable and photo‐patternable benzocyclobutene‐derived aggregation‐induced emission‐active polymer dielectrics

Electrical Property Improvement of Dicyandiamide-Cured Electrically Conductive Adhesives Through In-Situ Replacement by Difunctional Acids and the Impact on Storage