The Reconstructive Design of the Orbit-Retractor-brake-device

Ju-di ZHAO,Qin FU,Yin ZHANG,Qiang ZHU,Wei HAN

DOI: https://doi.org/10.3969/j.issn.1001-3997.2006.10.054

2006-01-01

Abstract:The faults of the orbit-retractor-brake-device was analyzed.Improvement means of the electromagnetism coil、 magnetic material、 friction material and heat treatment were put forward.The reconstructive design of the orbit-retractor-brake-device was successful.

What problem does this paper attempt to address?

The Design of High-speed Powerful Actuator Based on Giant Magnetostrictive Material and Analysis of Its Dynamic Modeling

Fu-zai L,Zhan-qing XIANG,Zong-jun QI,Yao-dong CHENG

DOI: https://doi.org/10.3321/j.issn:1003-8728.2001.02.016

2001-01-01

Abstract:This paper presents the design and structure of high-speed powerful actuator based on giant magnetostrictive material (Tb0.27Dy0.73)Fe1.9. Transfer function and dynamic modeling are described and discussed as well. The modeling can be widely used in the design of giant manetostrictive actuator. Experiments show the high-speed powerful actuator designed and developed by us can meet the requirements of species displace and vibration control system. The experiment results and the computer simulation results show that the device has good properties in low frequency range.
Multi-actuated Mechanism Design Considering Structure Flexibility Using Correlated Performance Reinforcing

Jing-hua Xu,Shu-you Zhang,Jian-rong Tan,Zhen Zhao

DOI: https://doi.org/10.1631/jzus.a1500003

2015-01-01

Journal of Zhejiang University SCIENCE A

Abstract:Multi-actuated rigid-flexible dynamic system exists widely in precision machinery and electrical control fields. The performances, such as kinematic, dynamic, electrical, magnetic, and thermal performances, are correlated and difficult to trap precisely. Therefore, a multi-actuated mechanism design method considering structure flexibility using correlated performance reinforcing is put forward. A system containing flexible subparts with multi degrees of freedom (DOF) with physical coordinate is converted into modal coordinate using ‘DOF×modal order’ square matrix. The structure flexibility is described by modal superposition of the shape mode which is considered as additional generalized coordinates. A dynamic equation with large DOF is formulated and reduced based on Craig-Bampton modal truncation. Using analogical design methodology with and without structure flexibility of the low voltage circuit breaker (LVCB), the extent of the performance impact of each subpart is obtained by calculating correlated Holm force, Lorentz force, electrodynamic repulsion force, electromagnetic force, and cantilevered bimetallic strip force. Design of experiments method is employed to reveal the hard-measuring properties using correlated relatively easy-measuring parameters. The trip mechanism is validated by an electrical performance experiment. results show that the structure flexibility can decrease the tripping velocity, which is non-negligible, especially for high frequency tripping. The method provides a reference significance for similar multi-actuated mechanism design.
The new fold and rolled-over type fire hose retractor

Wen-bin ZHANG,De-wei GUO,Li-bin YU,Jie MIN

DOI: https://doi.org/10.3969/j.issn.1009-0029.2017.02.023

2017-01-01

Fire Science and Technology

Abstract:Designed a new fold and rolled-over type fire hose retractor.The retractor could fold used fire hose to stripes,convenient for drying,and after drying it could roll over to spool.Analyze the design of key parts of system,including engine power mechanism,retracting mechanism and chain transmission mechanism.The real test results showed that the retractor is convenient for storage and carry of fire hose and fire hose spreading when drying,saving time,improving efficiency and making up for the deficiency of the existing technology.
Optimal Design of Magnetic System for the Magnetorheological Intelligent Damper

DQ Mei,TR Kong,ZC Chen

DOI: https://doi.org/10.1117/12.664796

2005-01-01

Abstract:In the structure of Magnetorheological (MR) intelligent damper, the magnetic system is a pivotal part. It has direct influence on the damper's performance. In order to optimize damper's magnetic system, the parameter model of magnetic system was established, which included many factors such as radius of piston rod, radius of piston, number of coil, thickness of piston cylinder, gap length of the annular orifice, and effectual length of the annular orifice. Then the optimal model of magnetic system was established, which was based on the characteristic equation of MR fluid, the mechanical model of damper, the restrained dimension of damper's structure and the parameter model of magnetic system. And the optimal model was solved based on the large-scale optimizing algorithm. The optimized result was validated by FEM analysis. The results show that the optimizing method of magnetic system for MR intelligent damper is accurate and effective.
Design and Optimization of Novel Doubly-Fed Consequent-Pole Flux Reversal Machine

Yuting Zheng,Lijian Wu,Youtong Fang,Xiaoyan Huang

DOI: https://doi.org/10.1109/ever48776.2020.9243134

2020-01-01

Abstract:Conventional consequent-pole flux reversal machine (CPFRM) can effectively reduce the pole flux leakage and improve the torque density. However, the torque improvement is quite limited. This paper proposes a doubly-fed (DF) CPFRM (DF-CPFRM) with two independent sets of armature windings placed on stator and rotor slots, which can realize better rotor space utilization and significant torque enhancement. First, the machine configurations and operation principles are introduced. Then, the optimization aiming at maximum torque while maintaining high fault tolerance are elaborated. The influence of main geometric parameters including split ratio, stator and rotor slot opening ratio etc. on the torque performance is also explicated. Moreover, the optimized DF-CPFRM is compared with the conventional CPFRM in terms of back-EMF, electromagnetic torque and overload capability etc. using finite element (FE) method.
Technical Improvement of Brake System with KJ Series Hoister

Dong Wang

2001-01-01

Abstract:This paper analyzes brake′s system of the old KJ series hoister and summarizes defect from practice of old hoister in use,raises conceiving of reform and designs counting method in theroy,summarizes advantage of reform.
Design and Analysis of a Linear-Rotary Permanent Magnet Motor with Orthogonal Windings

Yunnan Feng,Yanxin Li,Qinfen Lu,Youtong Fang

DOI: https://doi.org/10.1109/icem60801.2024.10700188

2024-01-01

Abstract:A linear-rotary permanent magnet motor (LRPMM) is investigated, which can produce rotary, linear, and helical motion of the mover. It consists of a primary with stator core having circumferential and axial slots and two orthogonal rotary and linear windings, and a secondary with alternatingly arranged permanent magnets and mover core. First, 3-D finite element models of LRPMM are established to investigate and optimize the detent force during linear motion. Second, the electromagnetic performances under different degrees of freedom are calculated and analyzed. Finally, the force performance of LRPMM under helical motion is mainly focused since the linear magnetic field and rotary magnetic field exist in same iron core. After the impact of the shared magnetic circuit is analyzed, it is shown that the iron core has saturation problem, and then the force performance is lowered. The results can provide reference for further optimization of magnetic circuit design.
An Optimized Permanent Magnet Brake Mechanism in Robot Joints

Kaimeng Wang,Hehua Ju,Yang Yang,Zhenhao Guo

DOI: https://doi.org/10.1109/access.2021.3053080

IF: 3.9

2021-01-01

IEEE Access

Abstract:This paper proposes a novel brake mechanism in robot joints, especially for space robot joints which require low power consumption and high reliability. The key point of the brake mechanism is that the torque spring is replaced with the Nd-Fe-B permanent magnet. Due to the position and force relationship between the permanent magnet and the electromagnet in the brake mechanism, the stroke of the brake armature can be extended so that the bolt type brake structure is adapted and the braking torque can be infinite theoretically. Meanwhile, the holding current in the electromagnet can be decreased to save energy and reduce heat generation. The magnetic circuit models of the electromagnet and permanent magnet in the brake mechanism are established and analyzed. In order to improve the response speed of the brake mechanism, a novel H-bridge brake power supply circuit is proposed. To verify the benefits of the design, a permanent magnet brake prototype with the H-bridge power supply circuit is set up. While the holding current is consistent with the peak current in the conventional torque spring motor brake, the proposed permanent magnet brake mechanism can decrease the holding current below 0.1 A.

computer science, information systems,telecommunications,engineering, electrical & electronic
Design for Mechanical Structure of Asynchronous Motor Principle Experiment Device

Zhongyao Wu,Jianzhong Fu,Huilin Qu,Jianbo Cao

DOI: https://doi.org/10.2991/isrme-15.2015.299

2015-01-01

Abstract:To solve the expression difficulties of the basic principle of asynchronous motor, and the faults to understand the relevant knowledge not fully, the asynchronous motor intuitive to express the basic principle of the experiment device was designed by analyzing the existing mechanical structures of asynchronous motor. The three-dimensional modeling was finished for the mechanical structure of the asynchronous motor principle experiment device. The experimental device is mainly divided into the base part design, speed display design and the basic principle of rotating demonstration part design. Through asynchronous motor principle experiment device can verify and demonstrate the rotation principle of the asynchronous motor, thereby facilitating scholars to understand.
Fault-Tolerant Control of Magnetically-Levitated Rotor with Redundant Structures Based on Improved Generalized Linearized EMFs Model

Baixin Cheng,Xin Cheng,Shao Song,Shuai Deng,Rougang Zhou,Yefa Hu,Huachun Wu

DOI: https://doi.org/10.3390/s21165404

2021-08-10

Abstract:Fault tolerance is one of the effective methods to improve the reliability of magnetic bearings, and the redundant magnetic bearing provides a feasible measure for fault-tolerant control. The linearization and accuracy of the electromagnetic force (EMF) from the redundant structures is crucial for designing fault-tolerant controllers. In the magnetic bearing with a redundant structure, the current distribution matrix W is an important factor that affects the accuracy of EMF. In this paper, we improved the accuracy of the EMF model and took the eight-pole symmetrical radial magnetic bearing as the research object. The corresponding displacement compensation matrices have been calculated for the different coils that fail in the magnetic bearing while the rotor is at the non-equilibrium position. Then, we propose a fault-tolerant control strategy that includes displacement compensation. The rigid body dynamics model of the rotor, supported by magnetic bearings with redundant structures, is established. Moreover, to verify the effectiveness of the proposed control strategy, we combined the rigid body dynamics model of the rotor with a fault-tolerant control strategy, and the corresponding simulation has been carried out. In the case of disturbance force and some coils fail in magnetic bearing and compared with the fault-tolerant control that absents the displacement compensation factors. The simulations demonstrate the disturbance rejection of magnetically levitated rotor system can be enhanced. The robustness of the rotor has been improved with the fault-tolerant control strategy proposed in this paper.
Design and research of the disc brake of mine hoists for monitoring the disc spring force and positive brake pressure

Yayun Zhang,Guiyun Xu,Xiaoguang Zhang,Shikang Sha

DOI: https://doi.org/10.1088/1361-6501/ab3565

IF: 2.398

2019-09-18

Measurement Science and Technology

Abstract:Common disc brakes of mine hoists cannot effectively detect the faults caused by an insufficient braking force. To solve the problem, a new disc brake is proposed which can accurately monitor the disc spring force (DSF) and positive brake pressure (PBP) in real time. Based on this, the new structure of the disc brake is designed, and the new DSF sensor and PBP sensor are installed in the disc brake to judge whether the braking force is adequate. By analyzing the structural mechanics models of two sensors, the design is verified as feasible. Moreover, theoretical parameters of the disc brake are calculated to prepare for comparison with experimental parameters. Finally, prototypes of the DSF sensor and PBP sensor are calibrated and the designed disc brake prototype of mine hoists is tested in the field. Experiments show that the DSF, PBP and other parameters monitored by the disc brake in real time are accurate, and the error is small compared with theoretical parameters. As a result, the faults caused by an insufficient braking force can be detected timely by the disc brake. The present study can provide a train of thought for monitoring disc brake faults.

engineering, multidisciplinary,instruments & instrumentation
Structural optimization design and numerical analysis of in-vessel magnetic compression coils

Qinglong Zhang,Bo Rao,Yong Yang,Ming Zhang,Yiliang Lv,Tao Peng,Zhijiang Wang,Yuan Pan

DOI: https://doi.org/10.1016/j.fusengdes.2023.113780

IF: 1.905

2023-07-01

Fusion Engineering and Design

Abstract:An FRC (field reversed configuration) device HUST-FRC (HFRC) is under construction at Huazhong University of Science and Technology, and the magnetic compression experiments will be investigated. 22 compression coils installed inside the metal vacuum chamber are designed with a peak current of about 110 kA rising within 50 μs. The coils are subjected to large electromagnetic forces during the compression process, which will challenge the structural stability of the coils. Therefore, it is necessary to estimate the structural stability of the compression coils during the compression progress. The compression process involves complex physical problems such as the coupling of circuit-electromagnetic-thermal-mechanical and non-linear contacts between adjacent coil components. It is also a challenge to calculate the coil current, electromagnetic load, and structure stress. To solve these problems, a joint analysis method is developed based on a two-dimensional (2-D) circuit-electromagnetic-thermal model and a three-dimensional (3-D) electromagnetic-mechanical model. The submodeling method is employed in mechanical simulations to improve the efficiency of coil optimization design. The electromagnetic and mechanical results confirm that the design of the compression coils is valid and feasible.

nuclear science & technology
Design, testing and analysis of a novel automotive magnetorheological braking system

Liangyao Yu,Liangxu Ma,Jian Song

DOI: https://doi.org/10.1177/0954407016674394

2016-11-13

Abstract:This paper presents a new approach to the design, testing and analysis of a magnetorheological brake which uses a multi-path magnetic circuit to satisfy the braking demand of vehicles. In contrast with a general braking system, an automotive brake exhibits an outstanding performance for high torques and long reaction times. We use a proposed power-law model and finite element analysis to obtain the magnetorheological braking performance for a high shear rate and a high-intensity magnetic field. Finite element analysis with different structures is adopted to determine the parameters of the magnetorheological braking and the layout of the magnetic circuits. An integrated prototype is also fabricated and tested. The test results show that the brake torque is relatively high, and the torque can be accurately controlled by the input current. The reaction time is less than 100 ms. We also analyse the experimental results and use these as the basis for fabricating a full-sized prototype. The full-sized prototype generally exhibits a high torque capacity and a fast dynamic response, thereby validating the feasible application of magnetorheological fluids in automotive braking.
Design and Control of Upper Limb Rehabilitation Training Robot Based on a Magnetorheological Joint Damper

Jintao Zhu,Hongsheng Hu,Wei Zhao,Jiabin Yang,Qing Ouyang

DOI: https://doi.org/10.3390/mi15030301

IF: 3.4

2024-02-22

Micromachines

Abstract:In recent years, rehabilitation robots have been developed and used in rehabilitation training for patients with hemiplegia. In this paper, a rehabilitation training robot with variable damping is designed to train patients with hemiplegia to recover upper limb function. Firstly, a magnetorheological joint damper (MR joint damper) is designed for the rehabilitation training robot, and its structural design and dynamic model are tested theoretically and experimentally. Secondly, the rehabilitation robot is simplified into a spring-damping system, and the rehabilitation training controller for human movement is designed. The rehabilitation robot dynamically adjusts the excitation current according to the feedback speed and human–machine interaction torque, so that the rehabilitation robot always outputs a stable torque. The magnetorheological joint damper acts as a clutch to transmit torque safely and stably to the robot joint. Finally, the upper limb rehabilitation device is tested. The expected torque is set to 20 N, and the average value of the output expected torque during operation is 20.02 N, and the standard deviation is 0.635 N. The output torque has good stability. A fast (0.5 s) response can be achieved in response to a sudden motor speed change, and the average expected output torque is 20.38 N and the standard deviation is 0.645 N, which can still maintain the stability of the output torque.

chemistry, analytical,nanoscience & nanotechnology,instruments & instrumentation,physics, applied
An experimental study on torque characteristics of magnetorheological brake with modified magnetic core shape

Jung Woo Sohn,Han Gyeol Gang,Seung-Bok Choi

DOI: https://doi.org/10.1177/1687814017752222

IF: 2.1

2018-01-01

Advances in Mechanical Engineering

Abstract:In this article, a new type of magnetorheological brake is designed and its torque characteristics are investigated experimentally. The proposed magnetorheological brake consists of an outer housing, a rotating drum, magnetorheological fluid, and a copper wire coiled magnetic core to generate a magnetic field. At first, the structural configurations of the magnetorheological brakes are presented with conventional and modified magnetic core shape. To achieve enhanced braking torque under limited small size, a modified magnetic core shape is adopted in the proposed magnetorheological brake. After manufacturing the magnetorheological brakes and measurement of braking torque, it is verified that the proposed magnetorheological brake with modified magnetic core shape has improved braking torque compared to conventional-type magnetorheological brake. For the actuator application, the dynamic characteristics, such as rising time, settling time, and falling time, of the proposed magnetorheological brake is also experimentally evaluated by observing the step response. In addition, the torque tracking control performance is also investigated by adopting fuzzy–proportional–integral–derivative control algorithm for desired input of sinusoidal and multi-magnitude step input. It is demonstrated that the proposed magnetorheological brake can be successfully used as an actuator with limited small size.

engineering, mechanical,thermodynamics
Dynamic characteristic simulation and optimization for the electromagnetic system with double coils

Shaohua Ma,Yan Liu,ZhiYuan Cai,Jia Pang

DOI: https://doi.org/10.1109/APPEEC.2010.5448604

2010-01-01

Abstract:In the optimum design of electromagnet, it is important to analyze the dynamic behaviors. The electromagnet is always used in stable operation, but it did not achieve the maximum efficiency. In this paper, it has proposed an electromagnetic system with double coils design methodology, which has applied Finite Element Method (FEM). The objective of design and analyses the electromagnet has achieve the desired requirements. From the instantaneous peak current of coil and the pull-in speed, it has optimized the improvement of the electromagnet. In order to energy saving and environmental protection, when the electromagnet is closed, double-coil automatically switch to single-coil. Based on these results, the validity of the proposed method has been confirmed by test.
Engineering design and testing of rotary joints' driving systems for the CFETR multi-purpose overload robot

Hongbin Huang,Haoyin Wang,Yiming Wang,Youmin Hu,Bo Wu,Jie Liu,Ping Su,Hongtao Pan,Yang Cheng,Yong Cheng

DOI: https://doi.org/10.1016/j.fusengdes.2024.114298

IF: 1.905

2024-03-08

Fusion Engineering and Design

Abstract:This study focuses on the engineering design and testing of the rotary joints' driving systems for the China Fusion Engineering Test Reactor (CFETR) Multi-Purpose Overload Robot (CMOR). CMOR is a critical component in the CFETR. The CFETR tokamak serves as an engineering test reactor in China for magnet confinement fusion research. CMOR, a 7-DOF manipulator, is specifically designed for internal maintenance within the CFETR. This poses significant challenges in the design of the joint driving systems. The joint types of CMOR are categorized into three, comprising one translation joint, two swing joints, and four rotary joints. Using rotary joint J6 of CMOR as an example, this paper provides a detailed exploration of the engineering design and testing of the rotary joints' driving systems, offering a comprehensive explanation of their design specifications and principles. Specification and strength assessments are conducted on the engineering design results, meeting all requirements. Furthermore, the paper delves into the testing methods of the driving systems, including the assessment of transmission error and backlash error, two crucial indicators for the driving system. This research contributes valuable insights for future joint designs and testing of the CMOR heavy-load manipulator.

nuclear science & technology
Notice of Retraction Dynamic Characteristic Simulation and Optimization for the Electromagnetic System with Double Coils

Shaohua Ma,Yan Liu,Zhiyuan Cai,Jia Pang

DOI: https://doi.org/10.1109/appeec.2010.5448604

2010-01-01

Abstract:Notice of Retraction After careful and considered review of the content of this paper by a duly constituted expert committee, this paper has been found to be in violation of IEEE's Publication Principles. We hereby retract the content of this paper. Reasonable effort should be made to remove all past references to this paper. The presenting author of this paper has the option to appeal this decision by contacting TPII@ieee.org. In the optimum design of electromagnet, it is important to analyze the dynamic behaviors. The electromagnet is always used in stable operation, but it did not achieve the maximum efficiency. In this paper, it has proposed an electromagnetic system with double coils design methodology, which has applied Finite Element Method (FEM). The objective of design and analyses the electromagnet has achieve the desired requirements. From the instantaneous peak current of coil and the pull-in speed, it has optimized the improvement of the electromagnet. In order to energy saving and environmental protection, when the electromagnet is closed, double-coil automatically switch to single-coil. Based on these results, the validity of the proposed method has been confirmed by test.
Extrusion magnetorheological brake

刘卫东,王鸿云

2012-03-06

Abstract:The utility model discloses an extrusion magnetorheological brake. The extrusion magnetorheological brake comprises a shaft, a magnet yoke rotatablely sleeved on the shaft and a armature fixedly sleeved on the shaft. A magnetic isolation seal ring is arranged on the outer periphery between the magnet yoke and the gag shaft, and a groove is arranged on the surface of the armature opposite to the magnet yoke. A magnetic shield is arranged in the groove, and the magnetic shield is contacted with the magnet yoke. A closed cavity is formed by the surrounding of the magnetic shield, the magnet yoke, the magnetic isolation seal ring and the armature, and magnetorheological fluid is positioned inside the cavity. A coil is arranged on the magnet yoke, and a reset device is arranged on the armature. The extrusion magnetorheological brake has the advantages that when the coil is powered on, the magnetorheological fluid turns into solid phase, a shear force is generated between the inner portion and the contact area, the armature moves towards the magnet yoke at the same time due to the magneticaction, extrusion is generated to the magnetorheological fluid, and the extrusion enables the braking force generated by the whole brake to increase manyfold, and therefore the braking request of large scale equipment can be met; the extrusion magnetorheological brake is small in volume, reliable in performance, compact in structure, and good in effect.

Engineering,Materials Science
A novel PM-electromagnet brake embedded with rolling balls

Yang Yang,Hehua Ju,Pengfei Xiao,Kaimeng Wang

DOI: https://doi.org/10.1109/tte.2022.3208192

IF: 6.519

2022-01-01

IEEE Transactions on Transportation Electrification

Abstract:This article proposes a novel PM-electromagnet brake with rolling balls embedded in the friction plate, which has significant advantages of higher torque-to-size ratio, lower power consumption, and quicker brake response speed. The structural innovations of the proposed brake are mainly reflected in the following two aspects: 1) the torque springs are replaced by high-performance PMs to reduce power consumption during Brake-Holding Mode and 2) rolling balls are embedded in the friction plate to increase the braking torque. In addition, an optimized brake circuit is designed to improve the brake response speed by shortening the inductor discharging time. First, the structural innovations of the proposed brake are presented and discussed in detail. Then, theoretical analysis mainly focuses on the following two aspects: 1) how the rolling-ball-embedded structure can improve the torque-to-size ratio and 2) how the distributed PMs can reduce the power consumption during Brake-Holding Mode. At last, the optimized brake circuit is given. To verify the benefits of the design, a proposed brake prototype is manufactured, as well as the optimized brake circuit. The experimental result is promising, and the proposed brake is suitable for various applications.

engineering, electrical & electronic,transportation science & technology

The Reconstructive Design of the Orbit-Retractor-brake-device

The Design of High-speed Powerful Actuator Based on Giant Magnetostrictive Material and Analysis of Its Dynamic Modeling

Multi-actuated Mechanism Design Considering Structure Flexibility Using Correlated Performance Reinforcing

The new fold and rolled-over type fire hose retractor

Optimal Design of Magnetic System for the Magnetorheological Intelligent Damper

Design and Optimization of Novel Doubly-Fed Consequent-Pole Flux Reversal Machine

Technical Improvement of Brake System with KJ Series Hoister

Design and Analysis of a Linear-Rotary Permanent Magnet Motor with Orthogonal Windings

An Optimized Permanent Magnet Brake Mechanism in Robot Joints

Design for Mechanical Structure of Asynchronous Motor Principle Experiment Device

Fault-Tolerant Control of Magnetically-Levitated Rotor with Redundant Structures Based on Improved Generalized Linearized EMFs Model

Design and research of the disc brake of mine hoists for monitoring the disc spring force and positive brake pressure

Structural optimization design and numerical analysis of in-vessel magnetic compression coils

Design, testing and analysis of a novel automotive magnetorheological braking system

Design and Control of Upper Limb Rehabilitation Training Robot Based on a Magnetorheological Joint Damper

An experimental study on torque characteristics of magnetorheological brake with modified magnetic core shape

Dynamic characteristic simulation and optimization for the electromagnetic system with double coils

Engineering design and testing of rotary joints' driving systems for the CFETR multi-purpose overload robot

Notice of Retraction Dynamic Characteristic Simulation and Optimization for the Electromagnetic System with Double Coils

Extrusion magnetorheological brake

A novel PM-electromagnet brake embedded with rolling balls