An Optimized Permanent Magnet Brake Mechanism in Robot Joints

Kaimeng Wang,Hehua Ju,Yang Yang,Zhenhao Guo

DOI: https://doi.org/10.1109/access.2021.3053080

IF: 3.9

2021-01-01

IEEE Access

Abstract:This paper proposes a novel brake mechanism in robot joints, especially for space robot joints which require low power consumption and high reliability. The key point of the brake mechanism is that the torque spring is replaced with the Nd-Fe-B permanent magnet. Due to the position and force relationship between the permanent magnet and the electromagnet in the brake mechanism, the stroke of the brake armature can be extended so that the bolt type brake structure is adapted and the braking torque can be infinite theoretically. Meanwhile, the holding current in the electromagnet can be decreased to save energy and reduce heat generation. The magnetic circuit models of the electromagnet and permanent magnet in the brake mechanism are established and analyzed. In order to improve the response speed of the brake mechanism, a novel H-bridge brake power supply circuit is proposed. To verify the benefits of the design, a permanent magnet brake prototype with the H-bridge power supply circuit is set up. While the holding current is consistent with the peak current in the conventional torque spring motor brake, the proposed permanent magnet brake mechanism can decrease the holding current below 0.1 A.

computer science, information systems,telecommunications,engineering, electrical & electronic

What problem does this paper attempt to address?

The paper primarily addresses the issues of high power consumption and heat generation in the braking mechanisms of robotic joints by proposing a novel permanent magnet braking mechanism. Specifically, the paper tackles the following key issues:

1. **Replacing Torque Springs**: Traditional brakes typically use torque springs to generate braking torque, but this method has the drawbacks of high energy consumption and significant heat generation. Therefore, this paper proposes using neodymium-iron-boron permanent magnets to replace torque springs, achieving a low-power holding state.

2. **Infinite Theoretical Braking Force**: Due to the positional relationship between the permanent magnet and the electromagnet in the new braking mechanism, the stroke of the brake armature can be extended to accommodate a bolt-type braking structure, theoretically achieving infinite braking torque.

3. **Reducing Holding Current**: By optimizing the design, the new mechanism can reduce the holding current in the electromagnet, which helps save energy and reduce heat generation.

4. **Improving Response Speed**: To further enhance the response speed of the braking mechanism, the paper also proposes a new type of H-bridge braking power circuit.

5. **Validating Design Advantages**: By building a prototype of the permanent magnet brake and conducting experimental tests, the paper validates the advantages of the proposed permanent magnet braking mechanism, specifically that it can reduce the holding current to 0.1A, which is particularly useful for space robot environments requiring high reliability and low power consumption.

In summary, this research aims to improve existing robotic joint braking systems by introducing permanent magnets to address the shortcomings of current technologies, and it experimentally verifies the feasibility and advantages of the proposed solution.