Drawing Data Conversion Between Different CAD/ CAM Softwares

CHEN Gang,LEI Liang,WANG Wei-jun

DOI: https://doi.org/10.3969/j.issn.1672-6413.2006.01.033

2006-01-01

Abstract:The drawings' applicability and conversion in the product development course between different CAD/CAM softwares were discussed.The feasibility as well as implement process of drawing data conversion was described.

What problem does this paper attempt to address?

Automated Analysis of Differences in the Functionality and Performance of 3D CAD Systems for Collaborative Design

Hao Lv,Jin Cheng,Jinfen Xia,Fenfang Zeng,Haoran Xu

2022-01-01

Abstract:3D CAD systems are widely applied in collaborative design, but different 3D CAD systems may have differences when performing the same functionality, which may cause potential errors in subsequent manufacturing and processing. This paper proposes an automated analysis method to determine differences in the functionality and performance of different 3D CAD systems based on a uniform interface. A hierarchical comparison method is proposed to automatically analyse the differences between the 3D CAD models generated by different 3D CAD systems in the same testing program, based on which the differences in the functionality of these 3D CAD systems can be analysed. The performance data of different 3D CAD systems are also recorded and compared. In the end, three 3D CAD systems are tested and analysed to demonstrate the feasibility of the proposed method.
CAD Software with CAE Data Conversion and Interface Research Methods

Zhao Lan

Abstract:Current CAD and CAE technology have been developed to a practical level and companies launch commercialized software.As manufacturing product information complexity,to achieve enterprise automation in separate CAD and CAE need a lot of work.So CAD and CAE software integration is the key to solve the problem,but the main obstacle is the integration of data sharing. The format is from the CAD interface between the two methods of data exchange to illustrate the integration,analysis of the advantages and disadvantages of several common formats and often now often used methods of data exchange.

Engineering,Computer Science
CMM Data Exchange with CAD/CAM Soft System in Reverse Engineering

JIN Tao,SHAN Yan,TONG Shui-guang

DOI: https://doi.org/10.3969/j.issn.1001-4551.2000.03.007

2000-01-01

Abstract:IGES is a simple data transfer format, in reverse engineering, according to the requirement of product geometry measure, CMM's data can transfer to CAD/CAM system by IGES format. In this paper, we design a IGES transfer program applied to reverse engneenng.
AutoCAD Information Access and Data Conversion of NC Machining Platform

张洪鑫,王鹏飞,尤波

DOI: https://doi.org/10.3969/j.issn.1007-2683.2002.03.022

2002-01-01

Abstract:In the system of NC machining, because of the disaccord between AutoCAD drawing information and NC code description, information will be dropped and the reliability is also decreased. According to the theory of NC interpolation and the structure of DXF file, drawing information assess and conversion system is developped based on the VisualC++6.0. The result of computer simulation indicates that this system can convert drawing information to NC codes and realizes the transmission of different data structure fast and precisely with high reliability.
Application of the Technology about Product Data Management Base on UG

童水光,张炜,蔡娥

DOI: https://doi.org/10.3969/j.issn.1009-0134.2004.02.003

2004-01-01

Abstract:PDM as more development of CAD/CAM, not only improve intrinsic enterprise managesystem, but live up to really integration manage about CAD、CAM、CAE and CAPP. Exertvirtue of equally design mode. Realize manage and operate to engineering data by usingPDM system, come into being information database/repository that base on UG then inde-pendence on it, thereby provide full and reliable design and making information for CAPP、CAM that base on charactering modeling. Stressing introduce product structure and config-ure manage and applying of drawing manage technology, provide useful reference for ap-ply PDM.
A data transformation method for CAD and GIS based on semantic and evolution theory

XU Fang-bin,LIU Ren-yi,ZHANG Feng,DU Zhen-hong,ZENG Zhi,LU Ying-ping

DOI: https://doi.org/10.3785/j.issn.1008-9497.2012.05.018

2012-01-01

Abstract:In a bid to meet the high efficiency and pertinence between the CAD and GIS data conversion,it designs out a brand new semantic adapter which is used in the interface of data conversion with lower cost,similar way to semantic mapping relation and biological population-based evolution.According to the instance presented within the paper,the model has shown great usability in practice.
Development of CAD/CAM System for Progressive Die of Lead Frame Based on SolidWorks

吴央芳,李江雄,张峻,杨洁,柯映林

DOI: https://doi.org/10.3321/j.issn:1003-8728.2003.04.047

2003-01-01

Abstract:According to structure of lead frame, an idea f or developing a CAD system for progressive die based on Solidworks is presented. Product drawing input, technic plan, part database, die construction design and NC programming modules of the system are introduced. The structure of the syste m and the methods adopted in the modules are discussed. An application shows tha t our system is more efficient.
An Effective Method and Its Implementation for Automatic Extraction of Part Information from Engineering Drawings

HU Min,JIANG Xiao-Hong,SHI Jiao-Ying

DOI: https://doi.org/10.3321/j.issn:1003-9775.2000.10.012

2000-01-01

Journal of Computer-Aided Design & Computer Graphics

Abstract:In order to reuse the CAD data efficiently, the paper presents an effective method for extracting mechanical part information from existing mechanical engineering drawings produced by CAD software. Characteristics of the forms in the engineering drawings are analyzed. A new method to represent arbitrary forms with matrix is proposed, which makes it easy to extract form frames. Based on the form frames, the part information is obtained. In addition, a practical software tool is briefly introduced, which can be used to extract part information from AutoCAD produced engineering drawings automatically.
Research on Data Transformation Between Principal Ship CAD Softwares

Yun MIAO,Xuefeng WANG

DOI: https://doi.org/10.3969/j.issn.1000-4882.2011.03.023

2011-01-01

Abstract:To utilize the secondary development tools of CADDS5 and TRIBON,a research on data transformation procedure is made by considering the model data characteristics and organization forms of current various principal ship CAD softwares.Application example proves that the discussed method can gain the information of model data from CADDS5,and convert the information into the effective TRIBON format.This method can contribute to data transformation between principal ship CAD softwares and to further application in CAD/CAE integration.
Data Interface between CAD Software and CAE Software

Wu Jing-jing

Abstract:Through the comparative analysis of the data interface method of common CAD and CAE software graphics and the test among the new version of two-dimensional CAD software CAXA 2009,3D CAD software pro/E Wildfire 5.0 and CAE software ANSYS 12.0,the integration between the new version of CAD software and CAE software and graphical data import method were found,then in practical engineering,the problem of the seamless connection between computer aided design software and computer aided engineering software was solved.We've found optimal solutions for the engineering design and optimization and performance analysis of mechanical properties of the product.

Engineering,Computer Science
Data conversion between CAD and GIS in land planning

Linyan He,Guoping Wu,Dongmei Dai,Li Chen,Gongxun Chen

DOI: https://doi.org/10.1109/GeoInformatics.2011.5981193

2011-01-01

Abstract:In land planning, data conversion between CAD and GIS becomes the data-sharing a great challenge. In this paper, three aspects were studied. First of all, the organization style between CAD and GIS data are compared. Secondly, the data conversion method based on FME is proposed, and, we analyze its semantic transformation model system. Finally, the coordinate transformation which takes place before the data conversion is studied, as well as spatial elements deformation because of it. In conclusion, different organization style is an obstacle to data conversion between CAD and GIS. As for coordinate transformation, we program and expand its attribute with the help of LISP files in AutoCAD. The data conversion based on FME makes the expression of spatial information maximum inherited. The semantic transformation model of FME is designed to build the mapping relationship between point, line, area and corresponding text during the transformation process between source and destination data.
Research on CAD/PDM Integration for MC and Its Key Technologies

XU Xin-sheng,FANG Shui-liang,LI Qiang,GU Xin-jian

DOI: https://doi.org/10.3969/j.issn.1009-0134.2006.09.002

2006-01-01

Abstract:In order to better support product development and design for Mass Customization (MC), the key integration technologies of Computer Aided Design (CAD) and Product Data Manage- ment (PDM) system were studied. Focusing on the data integration of part, the data model of part family and data mapping logic of CAD and PDM systems integration were discussed. The system integration architecture was put forward as well. Then several main function interfaces were developed including coding module interface, setting up tabular layouts of article characteristics and registration interface from CAD model to PDM. Finally, an application example was provided to verify the feasibility of principle and system.
The study of CAD/CAM system of super CNC glass carve center

曾伟梁,吴一高,傅建中,刘颖

DOI: https://doi.org/10.3969/j.issn.1001-2265.2003.03.006

2003-01-01

Abstract:Object-oriented technology is used to study the CAD/CAM system of super CNC glass carve center in this paper. Based on a successful development of the CAD/CAM system on the OS of WINDOWS, Modular organization in the CAD/CAM system and the detail process of figure forming are presented. It has been proved that the developed CAD system of glass carve robot that is accurate and effectively , and is very successful by a great deal of practice.
Investigation and application of product information transferring interface for mechanical CAD

Yu Dong

2002-01-01

Abstract:The data interfaces between CAD systems and in the interior of a system with imported STEP standard are introduced. It is discussed emphatically how to transfer product information via interface, and a complete set of techniques of product modeling, model transforming, data storing or fetching operation, and database building is put forward, which provides a kind of agile product data management pattern for the integration of CAD data.
To Reform the Teaching Method of the Mechanical Drawing with SolidWorks and AutoCAD

Xu Yunfe

Abstract:With computer-aided design software widely used in engineering practice, traditional mechanical drawing teaching methods are obvious shortcomings in the effect of the culture of reading and drawing mechanical drawings, such as teaching by physical model or drawing exercises with tools. In this paper, the course hours of mechanical drawing is redistributed, then SolidWorks and AutoCAD computer-aided design software is integrated into the course teaching practice, so students' ability of manual drawing and computer graphics is dual-trained and students' learning enthusiasm and initiative are fully mobilized. Using this flexible teaching mode, teaching and learning are much easier, good teaching effect has gotten.

Computer Science,Engineering
An automation solution to convert CAD engineering drawings into railroad station models

Yuan Wang,Xiaopeng Li,Yu Zhang

DOI: https://doi.org/10.1111/mice.13091

IF: 10.066

2023-09-16

Computer-Aided Civil and Infrastructure Engineering

Abstract:Creating a high‐fidelity railroad station model to match the physical details of hundreds of tracks and switches is never a trivial task. The manual modeling approach often costs engineers significant efforts and constrains the generality and extensivity of many advanced methods. Taking advantage that many stations are drawn proportionally into two‐dimensional drawing exchange format (DXF) files via state‐of‐the‐art computer‐aided design (CAD) techniques, this paper proposed an efficient solution to convert DXF files into meaningful station models. The proposed solution consists of two phases (1) converting graphic basic primitives without explicit engineering interpretations into recognizable railroad symbols and (2) modeling undirected railroad station graphs with necessary configurations such as endpoints and routes. The proposed solution is developed into a graphic user interface application with minimal user interactions and subsequently tested at several real‐world passenger stations in Asia for its validity, productivity, and applicability.

transportation science & technology,construction & building technology,computer science, interdisciplinary applications,engineering, civil
Research on technology of product data exchange for internet-based distributed integrated manufacturing system

Peng Gao,Lanfen Lin,Jinxiang Dong,Ming Cai

DOI: https://doi.org/10.1109/CSCWD.2002.1047726

2002-01-01

Abstract:One of the key technologies for distributed integrated manufacturing systems is to realize automatic transmission and conversion of product data among distributed and heterogeneous systems like CAD, CAPP, CAM, CAE, etc. This paper presents an Internet-based framework of product data exchange and the architecture of the framework, which uses Internet/CORBA as the communication platform and XML as product data exchange language. This framework within which, conversion of other data formats to XML format is implemented by software agents, supports exchange of structured and non-structured product data.
The Realization of Research for CNC Machining Systems Based on DXF File

Youwei Du

2009-01-01

Abstract:Extracting the geometric information of parts and processes information from the CAD system database is a method to integrate CAD/CAPP/CAM systems.This article described how to read such information as a straight line,circle,arc,elliptical arc from AutoCAD's DXF file.Combined with object-oriented programming methods,the proposed method will read the pixel information and transfer it into CNC machining code.
An Effective Method of Extracting Data from AutoCAD Drawing

Jiwen GAO,Tao HE,Yanan GUO,Shoubao Yang

DOI: https://doi.org/10.3969/j.issn.1000-3428.2001.02.072

2001-01-01

Abstract:The article introduces a method of getting the data from AutoCAD drawing and adding it to the Microsoft SQL Server,Microsoft Access and other database system automatically through the ActiveX Automation. The data gotten can be applied to computing,simulating, and forecast etc. This method extends the AutoCAD＇s function conveniently and can meet the need of enterprises.
A study for differences between different design drawing programs in sheet metal design

Yu-Che Huang,Tien-Chaun Yeh

DOI: https://doi.org/10.1051/matecconf/201821301002

2018-01-01

MATEC Web of Conferences

Abstract:Most appearance and structure design has always been based on the product processing technology as the spindle, in general; sheet metal design changes in the appearance of the structure is based mainly on the basic structure of products and processing technology as the main core, and the appearance of manufacturing more Mechanical sheet metal, so most designers will use different design procedures to draw 3D graphics in the assembly or disassembly of parts, but different drawing procedures will affect the future assembly and disassembly of the design. In this study, we will compare two different models by building a model program using two different sheet metal structure drawings to present the problems that may be encountered in sheet metal design through a specific design flow. Through a real 3D drawing and design case, 3D graphics design flow, and finally through a design case to do a verification, to provide a reference for the future design.

Drawing Data Conversion Between Different CAD/ CAM Softwares

Automated Analysis of Differences in the Functionality and Performance of 3D CAD Systems for Collaborative Design

CAD Software with CAE Data Conversion and Interface Research Methods

CMM Data Exchange with CAD/CAM Soft System in Reverse Engineering

AutoCAD Information Access and Data Conversion of NC Machining Platform

Application of the Technology about Product Data Management Base on UG

A data transformation method for CAD and GIS based on semantic and evolution theory

Development of CAD/CAM System for Progressive Die of Lead Frame Based on SolidWorks

An Effective Method and Its Implementation for Automatic Extraction of Part Information from Engineering Drawings

Research on Data Transformation Between Principal Ship CAD Softwares

Data Interface between CAD Software and CAE Software

Data conversion between CAD and GIS in land planning

Research on CAD/PDM Integration for MC and Its Key Technologies

The study of CAD/CAM system of super CNC glass carve center

Investigation and application of product information transferring interface for mechanical CAD

To Reform the Teaching Method of the Mechanical Drawing with SolidWorks and AutoCAD

An automation solution to convert CAD engineering drawings into railroad station models

Research on technology of product data exchange for internet-based distributed integrated manufacturing system

The Realization of Research for CNC Machining Systems Based on DXF File

An Effective Method of Extracting Data from AutoCAD Drawing

A study for differences between different design drawing programs in sheet metal design