Approach to the Mechanical Smoke Emission Feasibility Through the Winding Corridor of the Mansions in Atrium Architectural Style

Wei ZHONG,Ran HUO,Hao-bo WANG
DOI: https://doi.org/10.3969/j.issn.1009-6094.2007.03.028
2007-01-01
Abstract:This paper is aimed to present our two-dimensional linear plume model in hoping to analyze the feasibility of smoke emission through the winding corridor in an atrium style mansions. A CFD technique known as FDS is used to simulate the effect of smoke exhaust in the winding corridor in an actual mansion to validate the analysis. This paper has also made a detailed discussion of the smoke control effect by changing the depth of reservoirs in the corridor. In addition, proper depth of such reservoir is proposed based on the simulation results. As is known, the atrium architecture has taken fashion in present China, for perhaps their advantage of all its ground floors joined with each other into a through-to-the-end winding corridors. However, there remains to be a hard nut to design their smoke emission system in the mansion. The commonest used method is to exhaust the fire smoke in the atrium. In case a fire accident occurs in the annex, the exhaust fan or ventilator will begin to work to produce a negative pressure, in which the fire smoke can be made to enter the atrium to get released. This method, though convenient for implementation, remains unfavorable, because the smoke flux to be released in case of fire may increase too abruptly to get controlled when the fire plume is going to rise to the atrium top. Another method of smoke exhaust design is to let the exhaust release through individual rooms. The latter seems to be advantageous in avoiding large flux of exhaust gas, but difficult to be carried out because of the complex design of smoke pipe installation in every room. In recent years, a concept of exhaust in the winding corridor has been proposed, which is to combine the advantages of traditional design of smoke exhaust in atrium style building, which can reduce the volume flux of exhaust fan, and the design of the smoke pipe is also made fairly simple. Though the concept has been proposed a few years ago, it remains necessary to go through an in-depth study.
What problem does this paper attempt to address?