Abstract:Widespread use of printed electronics is limited by nozzle clogging and ink formulation constraints. To address this, a novel nozzle‐free printing technology called shock‐wave jet printing (SJP), enabled by laser‐generated focused ultrasound is explored. Performance of SJP‐printed and inkjet‐printed carbon nanotube thin film transistors is compared. SJP demonstrates 6x higher maximum mobility and successfully printed stored/unsonicated ink, whereas IJP suffered from nozzle clogging due to CNT agglomeration. Printed electronics have made remarkable progress in recent years and inkjet printing (IJP) has emerged as one of the leading methods for fabricating printed electronic devices. However, challenges such as nozzle clogging, and strict ink formulation constraints have limited their widespread use. To address this issue, a novel nozzle‐free printing technology is explored, which is enabled by laser‐generated focused ultrasound, as a potential alternative printing modality called Shock‐wave Jet Printing (SJP). Specifically, the performance of SJP‐printed and IJP‐printed bottom‐gated carbon nanotube (CNT) thin film transistors (TFTs) is compared. While IJP required ten print passes to achieve fully functional devices with channel dimensions ranging from tens to hundreds of micrometers, SJP achieved comparable performance with just a single pass. For optimized devices, SJP demonstrated six times higher maximum mobility than IJP‐printed devices. Furthermore, the advantages of nozzle‐free printing are evident, as SJP successfully printed stored and unsonicated inks, delivering moderate electrical performance, whereas IJP suffered from nozzle clogging due to CNT agglomeration. Moreover, SJP can print significantly longer CNTs, spanning the entire range of tube lengths of commercially available CNT ink. The findings from this study contribute to the advancement of nanomaterial printing, ink formulation, and the development of cost‐effective printable electronics.

Printed Carbon Nanotube Devices and Their Applications.

Ultrathin High-Mobility SWCNT Transistors with Electrodes Printed by Nanoporous Stamp Flexography

Towards Solution Processed Electronic Circuits Using Carbon Nanotubes

Ink-Jet Printing of Carbon Nanotube Thin Film Transistors

Research Progress in Carbon Nanotube Thin Film Transistors by Printing Technologies

Printed Thin-Film Transistors with Functionalized Single-Walled Carbon Nanotube Inks

43.1: Invited Paper: Large‐area and High‐performance Printed Carbon Nanotube and Metal Oxide Thin Film Transistors and Their Applications

Capillary Flow Printing of Submicron Carbon Nanotube Transistors

Fabrication and Electrical Properties of All-Printed Carbon Nanotube Thin Film Transistors on Flexible Substrates

Ink-Jet Printed Thin-Film Transistors with Carbon Nanotube Channels Shaped in Long Strips

Transfer printing approach to all-carbon nanoelectronics

Nozzle‐Free Printing of CNT Electronics Using Laser‐Generated Focused Ultrasound

Fabrication and characterization of thin-film transistors based on printable functionalized single-walled carbon nanotubes

Substrate-Versatile Direct-Write Printing of Carbon Nanotube-Based Flexible Conductors, Circuits, and Sensors

Printed Thin-Film Transistors and Circuits Based on Sorted Semiconducting Single-Walled Carbon Nanotubes

Fabrication and Electrical Properties of Printed Carbon Nanotube Thin Film Transistors (TFTs) Based on Self-made Carbon Nanotubes

Inkjet-Printed Transistors with Coffee Ring Aligned Carbon Nanotubes

Hybrid Fabrication of Flexible Fully Printed Carbon Nanotube Field-Effect Transistors

Large Area Roll-to-roll Printed Semiconducting Carbon Nanotube Thin Films for Flexible Carbon-Based Electronics

Development of Materials and Printing Methods for Fabrication of Thin-Film Transistors on Flexible Substrates

Fabrication and electrical properties of printed three-dimensional integrated carbon nanotube PMOS inverters on flexible substrates