Abstract:(NH4)Fe-2(PO4)(2)(OH)center dot 2H(2)O samples with different morphology are successfully synthesized via two-step synthesis route - ultrasonic-intensified impinging stream pre-treatment followed by hydrothermal treatment (UIHT) method. The effects of the adoption of ultrasonic-intensified impinging stream pre-treatment, reagent concentration (C), pH value of solution and hydrothermal reaction time (7) on the physical and chemical properties of the synthesised (NH4)Fe-2(PO4)(2)(OH)center dot 2H(2)O composites and FePO4 particles were systematically investigated. Nano-seeds were firstly synthesized using the ultrasonic-intensified T-mixer and these nano-seeds were then transferred into a hydrothermal reactor, heated at 170 degrees C for 4 h. The obtained samples were characterized by utilising XRD, BET, TG-DTA, SEM, TEM, Mastersizer 3000 and FTIR, respectively. The experimental results have indicated that the particle size and morphology of the obtained samples are remarkably affected by the use of ultrasonic-intensified impinging stream pre-treatment, hydrothermal reaction time, reagent concentration, and pH value of solution. When such (NH4)Fe-2(PO4)(2)(OH)center dot 2H(2)O precursor samples were transformed to FePO4 products after sintering at 650 degrees C for 10 h, the SEM images have clearly shown that both the precursor and the final product still retain their monodispersed spherical microstructures with similar particle size of about 3 pm when the samples are synthesised at the optimised condition.

Influence of precursor solution on preparation of (W,Ni,Fe) composite powder

Influence of Different Preparation Methods on Crystallisation and Morphology of Fe2o3 Nanoparticles

Controllable Synthesis of (nh4)fe2(po4)2(oh)·2h2o Using Two-Step Route: Ultrasonic-intensified Impinging Stream Pre-Treatment Followed by Hydrothermal Treatment.

PREPARATION OF NiO NANOPARTICLES ON THE SILICA SURFACE BY ADSORPTION PHASE SYNTHESIS AND ITS REGULATION ON MORPHOLOGY OF NiO PARTICLES

Influences of Tin Oxide Surface Modification on the Morphology and Performance of Sintered Ag/SnO2 Composite Powders

Preparation of AgSnO2 Nano-Composite Powder by Wet Chemical Method

Chemical Synthesis of Monodisperse Fe-Ni Nanoparticles Via A Diffusion-Based Approach

INFLUENCE OF PRECIPITANTS ON STRUCTURE OF COLLOIDAL SOLUTION SPRAY PYROLYSIS DERIVED Sm_(0.2)Ce_(0.8)O_(1.9) SOLID ELECTROLYTE

Preparation of NiAl2O4/Al2O3 composite nanopowder

Effect of Co on morphology and preparation of in situ synthesis of WC-Co composite powders

Preparation of Ag-Al2O3 nano-composites powder

Preparation of AgSnO_2 nano-composite powder by wet chemical method

Preparation and Sintering Performance of W-Ni/Yb2O3 Composite Materials

Preparation of Composite Nanoparticles of Fe-Zn Bioxide Using Surface Modification and Their Subsequent Characterization

Preparation and Characterization of Nio((Core))/Fe2o3((Shell)) Composite Particles

Effect of surfactants on dispersion property and morphology of nano-sized nickel powders

Effects on Direct Synthesis of Large Scale Mono-Disperse Ni0.5zn0.5fe2o4 Nanosized Particles

Structure, Morphology and Magnetic Properties of Flowerlike Γ-Fe2o3@nio Core/shell Nanocomposites Synthesized from Different Precursor Concentrations

Preparation and Surface Modification of Fe<sub>3</sub>O<sub>4 &Lt;/sub>nano-Magnetic Powders

Colloidal spray pyrolysis preparation and characterization of nanocrystalline NiO-SDC composite powders for SOFCs

In Situ Dispersion of Non-Aqueous Fe3O4 Nanocolloids by Microdroplet Coalescence and Their Use in the Preparation of Magnetic Composite Particles.