Abstract:By using a SHPB device combined with high-speed photography technology, low-velocity impact experiments of quartz glass beads with diameters of 7.90, 11.80 and 15.61 mm were carried out by means of respectively three kinds of transmission bars, i.e., steel bar, aluminum bar, and polymethyl methacrylate (PMMA) bar. According to the load-displacement curves in the breakage process of glass beads under different transmission bar conditions, combined with the load adjustment of glass beads under impact and the strain of glass beads during the experiment, the influence of stress adjustment on the breakage process of glass beads subjected to low-velocity impact is explored. The results show that under the same impact conditions, the adjustment of the material of the transmission bar will alter the load distribution in the glass bead during impact breakage, that is, the change of the wave impedance at the transmission end will change the reflected wave, which leads to the load adjustment in the process of multiple reflection loading. When the transmission bar is made of aluminum and PMMA, the load in the glass bead decreases obviously during the crushing process, and the stress adjustment duration of the glass bead becomes longer with more deformation of the cushion block during the loading process. When the transmission bar is made of steel, the strain in the glass bead is the largest at both ends, while the closer to the middle of the bead, the smaller the strain. For the glass beads loaded with aluminum and/or PMMA transmission bar, local unloading behavior is found at the transmission end of bead. By employing the PMMA transmission bar, the local stress and deformation both decrease, resulting in the glass bead being broken with larger deformation. It is further shown that glass bead breakage is controlled by local deformation and local deformation gradient.

Space and Time Effects of Stress on Cracking of Glass

Physically-based Interpretation of Abnormal Stress Relaxation Response in Glassy Polymers

A Stochastic Analysis of Glass Crack Initiation under Thermal Loading

Effect of stress-state adjustment on fragmentation behavior of quartz glass beads subjected to low-velocity impact

Thermal Shock Effect on the Glass Thermal Stress Response and Crack Propagation

Significance in the Factors of Glass Crack under Thermal Loading

Effect of Applied Stress on the Mechanical Properties of a Zr-Cu-Ag-Al Bulk Metallic Glass with Two Different Structure States

Cracking in polymer glasses and evolution at zero stress: Highlighting discrete long time scale relaxations

Comparative Study on Crack Initiation and Propagation of Glass under Thermal Loading

033 Crack initiation and path prediction of float glass with various constrain conditions under thermal loading

Temperature and Thermal Stress Simulation of Window Glass Exposed to Fire

Molecular dynamics simulation of strain rate effect on stress induced crystallization for metallic glass Cu

Experimental and macroscopic investigation of dynamic crack patterns in PVB laminated glass sheets subject to light-weight impact

The Competing Effect of Initial Crack Depth Versus Chemical Strengthening Parameters on Apparent Fracture Toughness of Sodium Aluminosilicate Glass

Quantity Effect Of Radial Cracks On The Cracking Propagation Behavior And The Crack Morphology

Stress Changed Damping and Associated Transforming Behavior in a Ti48.5Ni51.5 Strain Glass

Relaxations of Entropically Stressed Polymer Glasses

Dynamic three-dimensional stress prediction of window glass under thermal loading

In situ observation of fatigue crack propagation in soda‐lime glass with initial crack and residual stress induced by Vickers indentation under four‐point bending

Crack Evolution Process of Window Glass under Radiant Heating

Different Driving Mechanisms of In-Plane Cracking on Two Brittle Layers of Laminated Glass