Abstract:Using four different soft segments, i. e. polyterahydrofuran diol (PTMG), polycaprolactone diol (PCL), hydroxyl-terminated polybutadiene with high cis-1, 4 content (HTPB), and commercial hydroxyl-terminated polybutadiene produced by free radical polymerization (FHTPB), four kinds of polyurethane elastomers (PUE) were prepared by a two-step solution polymerization. The effects of soft segment structure on mechanical properties and thermal properties at room temperature and low temperature were investigated by tensile test, dynamic mechanical property analysis (DMA), differential scanning calorimetry (DSC) and thermogravimetric analysis. It has been found that the tensile strength and elongation at break of the four PUEs at low temperature (-30℃) are superior to those at room temperature. This is not only related to the autofrettage effect induced by crystallization of soft segment at low temperature, but also to the increase of the degree of micro-phase separation between the soft and hard segments. Compared with the other three kinds of PUE, the soft segment in HTPB-PUE has lowest polarity and glass transition temperature (Tg), so the micro-phase separation is in highest degree, and the elastomer has the most excellent flexibility. Even at -30℃, elongation at break of the HTPB-PUE is up to 660%. PCL-PUE and PTMG-PUE are rigid because their soft segments are easy to crystallize and their degree of micro-phase separation between soft and hard segment is low. The cyclic tensile testing indicated that HTPB-PUE and FHTPB-PUE still have excellent elasticity at-30℃. The results from DSC and DMA showed that the Tg of HTPB-PUE is much lower than the other three PUEs, and the value from DSC is about -103℃. The initial thermal decomposition temperatures of the four PUEs are very similar, and are all around 270℃.

Ionic Conduction of Polyurethane/sulfonated Polyether Blends

Effect of soft segment structure on properties of polyurethane elastomers

Effect Of Polyethersulfone On The Mechanical And Rheological Properties Of Polyetherimide-Modified Epoxy Systems

Rheological Study of Epoxy Systems Blended with Poly(ether sulfone) of Different Molecular Weights

Dynamic mechanical analysis of sulfonated polyurethane ionomers

The Role of Halloy Site on Crystallinity, Ion Conductivity, Thermal and Mechanical Properties of Poly(ethylene-Oxide)/halloysite Nanocomposites

XPS STUDY OF POLYMER SOLID IONIC CONDUCTORS BASED QN SEGMENTED POLYETHER POLYURETHANEUREAS

Study of solid polyurethane electrolytes synthesized from HDI and PEO of different molecular weight

The role of segmental mixing on the mechanical properties and oxidative stability of polydimethylsiloxane-based polyetherurethane

Hydrogen bond interaction and mechanical property of polycarbonate polyurethane solid electrolyte

Enhanced Mechanical and Dielectric Properties of Polyurethane Elastomers Containing Modified SiO 2

Blends of thermoplastic polyurethane and polyether–polyimide: preparation and properties

Blends of polydimethylsiloxane-based polyurethane and poly (propylene glycol)-based polyurethane with co-continuous structures: morphology evolution, synergistic effects and application in strain sensors

Tensile and Transformational Behavior of Poly(Ether Sulfone) Polycarbonate Blends

Thermal properties of polyurethane elastomer with different flexible molecular chain based on para-phenylene diisocyanate

STUDY ON SEGMENTED POLYURETHANE WITH MIXED SOFT SEGMENTS OF POLYCHLOROMETHYL METHYL SILOXANE AND POLYTETRAMETHYLENE OXIDE

Effects of Polyether and Polyester Polyols on the Hydrophobicity and Surface Properties of Polyurethane/Polysiloxane Elastomers

Physical Properties of Pva/Pssna Blends

Oxygen Diffusion Behavior In Poly(Ether Urethane) Cationomers Based On 4,4'-Methylenediphenyl Isocyanate

Polyurethane anionomers. I. Structure-property relationships

PREPARATION AND PROPERTIES OF SULFONATED POLY(ARYLENE ETHER SULFONE)/SULFONATED POLYIMIDE BLEND PROTON EXCHANGE MEMBRANES