Abstract:Side milling thin-walled workpiece edges is an indispensible procedure in the continuous process chains for the high-efficiency machining of thin-walled functional parts, for example, the small- and medium-sized compressor blades. In these operation cases, the workpiece vibration is easy to occur due to the poor stiffness of the thin-walled structures, causing defects to the machined surface finish and even the dimensional accuracy of the thin-walled workpiece edges. To this problem, this study proposes the tool inclination method based on the adaption of the cutting force component in the lowest stiffness direction of the thin-walled workpiece, and it aims, first, to guarantee the machined surface finish which is mostly dominated by the workpiece vibrations mainly induced by the relatively high cutting forces and, second, to guarantee the high machining efficiency. The parametric study on the tool inclination angle for side milling the thin-walled workpiece edges was conducted by using the finite element simulations. First, the finite element models were elaborated and validated by the experimental results in terms of the cutting forces. Then, based on a series of finite element simulations, the effects of the tool inclination angle on the cutting forces adaption and its corresponding mechanism, that is, the chip formation variation, were investigated. Simulation results under the given conditions showed that the optimal tool inclination angle for the minimum absolute value of Fn was 26°. At last, the prediction feasibility for the best machined surface finish when side milling the low-stiffness thin-walled workpiece edges at the optimal tool inclination angle was well validated by the experimental results. The proposed tool inclination method with the solid end mill based on the finite element model to improve the machined surface finish is meaningful and feasible for the high-efficiency manufacturing processes of thin-walled workpieces.

Systematic simulation procedure of peripheral milling process of thin-walled workpiece

Simulation of High-Speed Milling Process of Aerospace Aluminum Alloy

Three-dimensional numerical simulation for high speed milling of aerospace aluminum alloy

Finite Element Simulation and Analysis of Deformation in Machining of Aeronautical Aluminum Alloy Thin-Walled Workpiece

Milling Error Prediction of Thin-Walled Parts During High-Speed Machining

Numerical Simulation and Analysis of Symmetry and Step-symmetry Milling of Aerospace Thin-walled Workpiece

Numerical Simulation for the Milling of Alluminum Alloy Thin-Wall Workpiece with Two and Four Flutes Helical Cutter

Key Technologies of Physics-Based Milling Process Simulation

Parametric Study on the Tool Inclination Angle for Side Milling Thin-Walled Workpiece Edges Based on Finite Element Simulation

602 FEM-based Simulation for Workpiece Deformation in Thin-Wall Milling

A New Procedure for the Prediction of the Cutting Forces in Peripheral Milling

A New Method for Cutting Force Prediction in Peripheral Milling of Complex Curved Surface

Systematic Study of the Prediction Methods for Machined Surface Topography and Form Error During Milling Process with Flat-End Cutter

Peripheral Milling Force Induced Error Compensation Using Analytical Force Model and APDL Deformation Calculation

A Solid Model-Based Milling Process Simulation and Optimization System Integrated with Cad/Cam

Numerical evaluation of cutting strategies for thin-walled parts

Modeling and Simulation of Machined Surface Error in Micro-Ball-End Milling

Development Of An Integrated System Of Geometric Modeling And Machining Simulation Of End Mill

Wall thickness error prediction and compensation in end milling of thin-plate parts

General Modeling and Calibration Method for Cutting Force Prediction With Flat-End Cutter

An accuracy algorithm for chip thickness modeling in 5-axis ball-end finish milling