Abstract:In this study, the modified alkoxide sol–gel approach was used for the synthesis of ternary Ni–Ce–Mg–O oxide systems of variable composition. The prepared samples were characterized by thermal analysis, low-temperature nitrogen adsorption, transmission electron microscopy, X-ray diffraction, and temperature-programmed reduction. The presence of CeO 2 in the oxide composition was found to affect such properties as texture, morphology, reducibility of Ni 2+ , and dispersion of Ni 0 in the reduced samples. The catalytic properties of the Ni–Ce–Mg–O samples were examined with regard to dry reforming of methane (DRM) and catalytic pyrolysis of hydrocarbons with the formation of carbon nanofibers (CNF). It was found that the CeO 2 -containing samples demonstrate more stable performance in DRM and are less prone to coke formation. The Ni10Ce10 catalyst containing 10% NiO and 10% CeO 2 within the MgO matrix demonstrated the highest CO 2 and CH 4 conversion values. Contrarily, the highest carbon yield was observed for the Ni15Ce5 sample (15 wt% NiO, 5 wt% CeO 2 ). An increase in the CeO 2 content diminished the carbon yield. The structure of the formed CNFs was affected by the type of substrate used (ethylene or a mixture of C 2 -C 4 saturated hydrocarbons). Thus, the sol–gel technique was shown to be efficient for the preparation of ternary Ni–Ce–Mg–O systems with a high content of nickel and ceria species evenly distributed within the MgO matrix. Varying the ceria content, it is possible to balance between the DRM and catalytic pyrolysis modes of the catalyst operation.

Preparation of Ni-Ce-O Mixed Oxide by Oxalate Gel-Coprecipitation Method for Catalytic Combustion of Methane

Influence of Ce/Nb Molar Ratios on Oxygen-Rich CexNb1-xO4+δ Materials for Catalytic Combustion of VOCs in the Process of Polyether Polyol Synthesis

Catalytic Oxidation of Methane over Novel Ce?Ni?O Mixed Oxide Catalysts Prepared by Oxalate Gel-Coprecipitation

Synthesis of Nanoparticle Ce–Mg–O Mixed Oxide As Efficient Support for Methane Oxidation

Catalytic Properties of Ni-Ce-O/ZrO_2 in Low-Temperature Methane Combustion

In-situ Synthesis of Monolithic Cu-Mn-Ce/cordierite Catalysts Towards VOCs Combustion

Reduction Property and Catalytic Activity of Ce1−XNiXO2 Mixed Oxide Catalysts for CH4 Oxidation

Ni–Ce–Al composite oxide catalysts synthesized by solution combustion method: Enhanced catalytic activity for CO methanation

Uniformly Dispersed Nano Pd-Ni Oxide Supported on Polyporous CeO<sub>2</sub> and Its Application in Methane Conversion of Tail Gas from Dual-Fuel Engine

Catalytic performance of La–Ce–O mixed oxide for combustion of methane

Catalytic Methane Combustion over Co3O4/CeO2 Composite Oxides Prepared by Modified Citrate Sol–Gel Method

Preparation of NiCe Mixed Oxides for Catalytic Decomposition of N2O

Sol–gel-prepared ternary Ni–Ce–Mg–O oxide systems: the role of CeO2 in balancing between dry reforming of methane and pyrolysis of hydrocarbons

Nickel Oxide As an Effective Catalyst for Catalytic Combustion of Methane

The Catalytic Methanation of Coke Oven Gas over Ni-Ce/Al2O3 Catalysts Prepared by Microwave Heating: Effect of Amorphous NiO Formation

Synthesis of Mesoporous CeO2-MnOx Binary Oxides and Their Catalytic Performances for CO Oxidation

Highly active Ni/CeO2 catalyst for CO2 methanation: Preparation and characterization

Ni-CeO2 Catalyst with High Ni Loading Prepared by Salt-Assisted Solution Combustion for CO2 Methanation

Facile Route for Synthesizing Ordered Mesoporous Ni–Ce–Al Oxide Materials and Their Catalytic Performance for Methane Dry Reforming to Hydrogen and Syngas

CO2 Methanation on the Catalyst of Ni/MCM-41 Promoted with CeO2

Influence of CeO2-ZrO2 and α-Al2O3 on methane partial oxidation over Ni catalyst