Abstract:The pretension deviation caused by two kinds of geometrical errors, manufacturing error of member length and installation deviation of anchoring joint, is investigated for a novel crescent-shaped tensile system applied as the canopy structure in Yueqing Stadium, Zhejiang, China. The deviation of anchoring joint is transformed into the length error of radial cable, and the member length error is assumed to yield Gaussian distribution. An analytical expression, which reflects the relationship between the member length errors and pretension deviations, is deduced. A different choice of active cables leads to different sensitivity matrix in this analytical expression, which indicates theoretically that the effect for controlling pretension deviation varies with the tensioning scheme adopted in the construction. A cable truss is employed as an illustrative example to investigate the validity of this method. According to the limit values of the two kinds of geometrical errors specified in China standards, the structural pretension deviations under five tensioning schemes are calculated for the crescent-shaped tensile canopy structure. The pretension sensitivity of each member category to the geometrical errors is analyzed by comparing the relative pretension deviations. The control effects on pretension deviations are also compared for these five tensioning schemes. The results indicate that distinct pretension deviations exist in the structure if only controlling the lengths of all members or the tension forces of ring cables during construction. Stretching the upper and lower radial cables and also controlling their tension forces can prominently decrease the structural pretension deviations. However, the pretension deviations of suspenders cannot be effectively controlled for any of the five tensioning schemes. (C) 2016 Elsevier Ltd. All rights reserved.

Analysis and design of cantilever string structure in canopy shell of Pujiang Sport Center

Experimental Study on Construction Tension and Local Component Failure of Double Inner and Outer Latticed Shell String Structure

Design and Research of the Long-Span Truss String Structure for the Platform Canopy of Beijing North Station

Model Designing and Static Experimental Study on Double Inner and Outer Latticed Shell String Structure

Analysis and experiment on erection process of a crescent-shaped cable-truss canopy structure

Study on Dynamic Characteristics of a New Space Latticed Shell String Structure

Numerical Analysis of the Pretension Deviations of a Novel Crescent-Shaped Tensile Canopy Structural System

Model Experiment on the Static Behaviors of a Crescent-Shaped Cable-Truss Canopy Structure

Hoisting of prestressed long-span truss string structures

Structural Design Process Of A Novel Spatial Cable Truss In Typhoon Area

Sliding construction of prestressed long-span truss string structures

Structural Design Of A Practical Suspendome

Experimental study on truss string structure of Beijing North Station

Form and Structural Properties of a New Lattice Shell String Structure

Introduction of architectural and structural design of roof system of Yueqing Olympic Center including a stadium and two arenas

STRUCTURAL PERFORMANCE RESEARCH AND ENGINEERING OPTIMIZATION OF THE TRUSS STRING STRUCTURE OF BEIJING NORTH RAILWAY STATION

Wind resistance analysis and research of truss string structure used for platform canopy of railway station

Stability analysis of roof structure of Zhejiang University Zijingang Gymnasium

Structural Behavior of Folded Truss for Annulus Stadium Cantilevered Roof

Structural design on steel roof of the stadium in Nantai Lake Olympic Wetland Park

THE PRATICAL APPLICATION OF STRING-BOW LATTICED SHELL STRUCTURE