Analysis and experiment on erection process of a crescent-shaped cable-truss canopy structure

邓华,祖义祯,沈嘉嘉,白光波,董石麟,张志宏,陈玲秋

DOI: https://doi.org/10.3785/j.issn.1008-973X.2013.03.013

2013-01-01

Abstract:The erection method was investigated for a novel crescent-shaped cable-truss tensile system used as a canopy structure in Yueqing Stadium, Zhejiang Province. An erection programme was suggested, in which members were assembled on a platform near the ground, and then the whole structure was hoisted by dragging the upper and lower radial cables in turn. Numerical simulation of the hoisting process was carried out using the dynamic relaxation method. A suitable shape of the erecting platform was calculated for minimizing the distance of dragging lines. The properties of the structural geometry and internal forces of members in hoisting process were analyzed, and some local struts were found to be toppled over. By means of a 1:15 scaled model of the canopy structure of Yueqing Stadium, a hoisting experiment for the suggested erection programme was carried out. The nodal coordinates of loop cable, the axial forces of loop cable and radial cables at each hoisting step were measured, and well accorded with the numerical solutions by comparison. The results of numerical computation and model test revealed that the final design configuration of this cable-truss tensile system could be reached by the suggested erection programme. The kinematic path of the system during hoisting was stable in general.