Abstract:Pyrolysis technology is one of the most effective thermal treatment methods recycling rigid polyurethane foam (RPUF) waste. To optimize pyrolysis recovery efficiency, quantifying the pyrolysis reaction kinetics and the heat required for the thermal treatment process is critical. This work focuses on establishing a systematic methodology to quantify pyrolysis reaction kinetics and thermodynamics for RPUF waste. RPUF waste with two different densities (RPUF ρ100 and RPUF ρ45 ) were investigated using thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC) under anaerobic atmosphere to measure mass and heat flow information. The obtained data were inversely analyzed using a numerical framework known as ThermaKin2Ds. Pyrolysis reaction mechanisms with four and three consecutive first-order reactions were developed to reproduce the TGA data for RPUF ρ100 and RPUF ρ45 , respectively. The Hill Climbing Optimization Algorithm was employed to adjust the reaction kinetics for an improved agreement between the ThermaKin2Ds-reproduced and experimental data. Based on the heat flow data from DSC tests, the specific heat capacity of each condensed-phase component was determined by using the inverse modeling method. Additionally, the micro-scale combustion calorimeter was used to generate the heat release data that served as the target data for inversely determining the heats of complete combustion, h c , of each pyrolyzate. The established pyrolysis reaction models was further validated by predicting the TGA results collected under different external heating conditions. Subsequently, the generated combustion-inhibiting gases (CO 2 ) and combustion-promoting gases (olefins, alkanes, carboxylic acids, etc.) were characterized through TGA coupled with Fourier-transform infrared spectroscopy (TG-FTIR). This allowed us to elucidate the gas-phase combustion phenomena observed in MCC experiments. This work provides a core set of parameters for optimizing the thermal treatment conditions of RPUF waste.

Pyrolysis Characteristics of Waste Rigid Polyurethance Foam

Characterization of pyrolysis behavior for rigid polyurethane foam wastes with different densities through TGA-FTIR-DSC-MCC and Hill Climbing Optimization methods

Insight into waste polyurethane pyrolysis pathways: mechanism functions analysis and in-situ coupling online monitoring

Thermal Degradation Characteristics of Rigid Polyurethane Foam and the Volatile Products Analysis with TG-FTIR-MS

Review on the pyrolysis products and thermal decomposition mechanisms of polyurethanes

Study on the Pyrolytic Behaviors and Kinetics of Rigid Polyurethane Foams

Comparative study on the pyrolysis kinetics of polyurethane foam from waste refrigerators

Study on the Pyrolysis Properties of Aluminum-Plastic Package Waste

Pyrolysis and combustion characteristics of typical waste thermal insulation materials

Pyrolysis Kinetics and Flammability Evaluation of Rigid Polyurethane with Different Isocyanate Content

Distribution, migration, and removal of N-containing products during polyurethane pyrolysis: A review

Pyrolysis characteristics, kinetics and products of flexible polyurethane foam in luxury cruise ship via TG, FTIR, GC-MS and Shuffled Complex Evolution

Thermogravimetric analysis and pyrolysis characterization of expanded–polystyrene and polyurethane–foam insulation materials

An Experimental Study on Pyrolysis Gas Characteristics of Typical Components of Medical Waste

Gasification of waste rigid polyurethane foam: optimizing operational conditions

Research on the Glycolysis of Waste Polyurethane Foam

Experimental and Numerical Analyses of Thermal Failure of Rigid Polyurethane Foam

Study on Thermogravimetric Experiment of Pyrolysis of Refuse Derived Fuel

Pyrolysis characteristics of organic components of municipal solid waste at high heating rates.

Pulverized Polyurethane Foam Particles Reinforced Rigid Polyurethane Foam And Phenolic Foam

The Pyrolysis Behaviors of Blended Pellets of Pine Wood and Urea-Formaldehyde Resin