Abstract:Polyurethane (PU) is an indispensable part of people's lives. With the development of polyurethane, the disposal of polyurethane waste has become a significant issue around the world. Conventional degradation catalysts have poor dispersion and low degradation efficiency when used in the process of solid degradation into liquid. Therefore, this paper innovatively adopts self-made core–shell nanoscale titanium catalysis, traditional alkali metal catalyst (KOH), and polyol to carry out the glycolysis of waste polyurethane (PU) pipeline foam. The homogenized nanoscale titanium catalyst coated with alcohol gel has an obvious core–shell structure. The alcohol gel not only protects the catalyst but also dissolves with the alcoholysis agent in the process of glycolysis and disperses more evenly into the alcoholysis agent to avoid the phenomenon of nanocatalyst agglomeration, so as to facilitate catalytic cracking without reducing catalyst activity. In this study, investigated and compared the production of renewable polyurethane foam via a one-step method based on use of a homogeneous core–shell nanostructured titanium catalyst vs. a traditional alkaline catalyst in terms of the properties of regenerated polyether polyols as well as of the foams produced from these polyols. The physicochemical properties of regenerated polyether polyols that were analyzed included viscosity, hydroxyl value, and average molecular weight. The regenerated polyurethane foams were characterized based on water absorption, TG, SEM, and thermal conductivity analyses. The results show that, when the addition of homogeneous titanium catalyst was T2 0.050 wt.%, the viscosity of regenerated polyether polyols was the lowest, at 5356.7 mPa·s, which was reduced by 9.97% compared with those obtained using the alkali metal catalyst (KOH). When the amount of titanium catalyst was T3 0.075 wt.%, the hard foam made of regenerated polyurethane prepared by the catalyst showed the best properties, with a compressive strength of 0.168 MPa, which is 4.76% higher than that of the foam prepared using KOH catalyst.

Research on the Glycolysis of Waste Polyurethane Foam

Study on Efficient Degradation of Waste PU Foam

Analysis of the Influencing Factors of the Efficient Degradation of Waste Polyurethane and Its Scheme Optimization

Study and Characterization of Regenerated Hard Foam Prepared by Polyol Hydrolysis of Waste Polyurethane

Recovery of Flexible Polyurethane Foam Waste for Efficient Reuse in Industrial Formulations

Analysis of Factors Influencing the Efficiency of Catalysts Used in Waste PU Degradation

Comparative study on the pyrolysis kinetics of polyurethane foam from waste refrigerators

Insight into waste polyurethane pyrolysis pathways: mechanism functions analysis and in-situ coupling online monitoring

Polyurethane Waste Recycling: Thermolysis of the Carbamate Fraction

Recycling of Polyurethane Foams via Glycolysis: A Review

Characterization of pyrolysis behavior for rigid polyurethane foam wastes with different densities through TGA-FTIR-DSC-MCC and Hill Climbing Optimization methods

Gasification of waste rigid polyurethane foam: optimizing operational conditions

Chemical Recycling of Waste Polyurethane Foams: Efficient Acidolysis under the Catalysis of Zinc Acetate

Valorization of Xylose Residues and Crude Glycerol for Production of Biopolyurethane Foam

Polyurethane Foam Chemical Recycling: Fast Acidolysis with Maleic Acid and Full Recovery of Polyol

Toward chemical recycling of PU foams: purification options

Recovery of Waste Polyurethane from E-Waste-Part I: Investigation of the Oil Sorption Potential

Upcycling of waste epoxy thermosets to robust polyurethane foams via an in situ degradation-foaming process

Study on the management status and countermeasures for waste polyurethane foam from refrigerators in China

Application of Whisker-Toughened Aerogel to Recycling of Used Polyurethane Sheets

Polyurethane Composites Recycling with Styrene–Acrylonitrile and Calcium Carbonate Recovery