Abstract:Polyurethane (PU) is an indispensable part of people's lives. With the development of polyurethane, the disposal of polyurethane waste has become a significant issue around the world. Conventional degradation catalysts have poor dispersion and low degradation efficiency when used in the process of solid degradation into liquid. Therefore, this paper innovatively adopts self-made core–shell nanoscale titanium catalysis, traditional alkali metal catalyst (KOH), and polyol to carry out the glycolysis of waste polyurethane (PU) pipeline foam. The homogenized nanoscale titanium catalyst coated with alcohol gel has an obvious core–shell structure. The alcohol gel not only protects the catalyst but also dissolves with the alcoholysis agent in the process of glycolysis and disperses more evenly into the alcoholysis agent to avoid the phenomenon of nanocatalyst agglomeration, so as to facilitate catalytic cracking without reducing catalyst activity. In this study, investigated and compared the production of renewable polyurethane foam via a one-step method based on use of a homogeneous core–shell nanostructured titanium catalyst vs. a traditional alkaline catalyst in terms of the properties of regenerated polyether polyols as well as of the foams produced from these polyols. The physicochemical properties of regenerated polyether polyols that were analyzed included viscosity, hydroxyl value, and average molecular weight. The regenerated polyurethane foams were characterized based on water absorption, TG, SEM, and thermal conductivity analyses. The results show that, when the addition of homogeneous titanium catalyst was T2 0.050 wt.%, the viscosity of regenerated polyether polyols was the lowest, at 5356.7 mPa·s, which was reduced by 9.97% compared with those obtained using the alkali metal catalyst (KOH). When the amount of titanium catalyst was T3 0.075 wt.%, the hard foam made of regenerated polyurethane prepared by the catalyst showed the best properties, with a compressive strength of 0.168 MPa, which is 4.76% higher than that of the foam prepared using KOH catalyst.

Upcycling of waste epoxy thermosets to robust polyurethane foams via an in situ degradation-foaming process

Study on Efficient Degradation of Waste PU Foam

Reconstruction of new high-performance epoxy thermoset based on the full utilization of the degradation products of waste epoxy thermoset

Analysis of the Influencing Factors of the Efficient Degradation of Waste Polyurethane and Its Scheme Optimization

Chemical upcycling of commodity thermoset polyurethane foams towards high-performance 3D photo-printing resins

Study and Characterization of Regenerated Hard Foam Prepared by Polyol Hydrolysis of Waste Polyurethane

Chemical Recycling of Waste Polyurethane Foams: Efficient Acidolysis under the Catalysis of Zinc Acetate

Valorization of waste biomass for the fabrication of isocyanate-free polyurethane foams

An efficient and economical degradation strategy for epoxy thermoset based on low cost transesterification catalyst

Recovery and Reutilization of Epoxy Thermoset via Acidic Ion Exchange Resin-Induced Controllable Oxidative Degradation and Subsequent Microspheroidization

A mild and efficient oxidative degradation system of epoxy thermosets: full recovery and degradation mechanism

Analysis of Factors Influencing the Efficiency of Catalysts Used in Waste PU Degradation

Multicycling of Epoxy Thermoset Through a Two‐Step Strategy of Alcoholysis and Hydrolysis using a Self‐Separating Catalysis System

Mechanochemistry: An Efficient Way to Recycle Thermoset Polyurethanes

Facile recycling of anhydride-cured epoxy thermoset under mild conditions with multifunctional hydrazine hydrate

Application of Whisker-Toughened Aerogel to Recycling of Used Polyurethane Sheets

Recycled-based thermosetting material obtained from the decomposition of polyurethane foam wastes with castor oil

Recovery of Flexible Polyurethane Foam Waste for Efficient Reuse in Industrial Formulations

Unlocking Auxetic Behavior in Recyclable Thermosetting Foams Enabled by Dynamic Disulfide Cross-linking Strategy

Reinforcing mechanically reclaimed polyurethane foam wastes‐based elastomer with modified recycled polyester fibers

Polyurethane Composites Recycling with Styrene–Acrylonitrile and Calcium Carbonate Recovery