Abstract:Multilayer composite packaging plastic is commonly used in daily life. Due to the complex structures and the existence of heteroatoms, such as nitrogen and oxygen, the recycling of this kind of plastic is challenging. Recycling through the pyrolysis method may provide an efficient option with respect to the mechanical and solvent methods. An understanding of the behaviour of heteroatoms during pyrolysis is significant to optimize the operating conditions. In this work, two composite packaging plastics of PET/LDPE (Polyethylene Terephthalate/Low Density Polyethylene) and PA/LDPE (Polyamide//Low Density Polyethylene) were pyrolysed at various temperatures between 400 and 500 °C in a fixed bed reactor. Heteroatom balance and composition analysis were conducted. Especially, the composition of O- and N-containing compounds in oils was fully understood by using GC-MS (Gas Chromatograph - Mass Spectrometer) and APPI FT-ICR MS (Atmospheric Pressure Photoionization Fourier Transform-Ion Cyclotron Resonance Mass Spectrometer) instruments. At 400 °C, only 2.2 wt.% oxygen was left in 53.9 wt.% solid residues for PET/LDPE and 3.6 wt.% nitrogen was retained in 61.0 wt.% solid residues for PA6/LDPE, whereas nearly no oxygen was retained in solid residues for PA6/LDPE. So the PET/PA6 can be degraded in a much lower temperature range than LDPE indicating the possibility of separating heteroatoms by step-wise pyrolysis. A large amount of O-containing compounds were observed in oils from PET/LDPE pyrolysis, while O, N-containing compounds existed in oils from PA6/LDPE. The APPI FT-ICR MS analysis revealed that parts of O-containing compounds were generated through the interaction between O-containing functional groups and aliphatics during the PET/LDPE pyrolysis. For PA6/LDPE, the deoxygenation reaction was easier to occur than the denitrification reaction.

Study on the Pyrolysis Properties of Aluminum-Plastic Package Waste

Effects of Temperature on the Pyrolysis Products of Aluminum-Plastic Package Waste

Energy balance analysis on the pyrolysis process of aluminum-plastic package waste

Investigation in the pyrolysis of polyester coated on aluminum-based beverage: Thermodynamic properties, product and mechanism

Study on the pyrolysis behaviors of mixed waste plastics

Thermal and spectroscopic (TG/DSC–FTIR) characterization of mixed plastics for materials and energy recovery under pyrolytic conditions

Effects of temperature zones on pyrolysis products of mixed plastic waste

The behavior of heteroatom compounds during the pyrolysis of waste composite plastics

Investigating Kinetic Behavior and Reaction Mechanism on Autothermal Pyrolysis of Polyethylene Plastic

Kinetics, Product Evolution, and Mechanism for the Pyrolysis of Typical Plastic Waste

Thermal degradation of typical plastics under high heating rate conditions by TG-FTIR: Pyrolysis behaviors and kinetic analysis

Pyrolysis Study of Scrap Automotive Polymers with TG-MS Technique

Comparison of Waste Plastics Pyrolysis under Nitrogen and Carbon Dioxide Atmospheres: A Thermogravimetric and Kinetic Study

Kinetic studies on the pyrolysis of plastic waste using a combination of model-fitting and model-free methods

Pyrolysis kinetics analysis of the organic waste sorted from food waste

Pyrolysis of polypropylene plastic waste: An analysis of oil quantity, density, viscosity, and calorific value

Pyrolysis of Mixed Plastic Waste: I. Kinetic Study

A comprehensive experimental investigation of plastic waste pyrolysis oil quality and its dependence on the plastic waste composition

Numerical investigation on the heat transfer of plastic waste pyrolysis in a rotary furnace

Pyrolysis characteristics and kinetics of waste photovoltaic module: A TG-MS-FTIR study

Pyrolysis of Specific Non-Recyclable Waste Materials: Energy Recovery and Detailed Product Characteristics