Abstract:Using waste plastics as a reburning fuel is promising for both reducing NO x emissions and managing plastic waste. To gain a better understanding of the chemistry involved in plastic reburning, pyrolysis products of different types of plastics at typical reburning temperatures (900–1200 °C) were investigated experimentally, and the reburning performance of simulated plastic pyrolysis gases was studied through experiments and chemical kinetic modeling. The plastics involved in the pyrolysis experiments included high-density polyethylene (HDPE), polypropylene (PP), polyamide 6 (PA6), and acrylonitrile–butadiene–styrene copolymer (ABS). HDPE exhibited the highest hydrocarbon gas yield (up to ∼ 70 wt% at 900 °C) while ABS had the lowest gas yield (<20 wt%) among the four plastics at the investigated temperatures. The hydrocarbon gas was composed mainly of methane, ethylene, and acetylene, with ethylene decreasing and acetylene increasing with temperatures rising from 900 to 1200 °C. Hydrogen cyanide was found to be the dominant gaseous nitrogen-containing compound for PA6 and ABS. Solid byproducts such as soot were generated at pyrolysis temperatures exceeding 1100 °C, leading to a reduction of the gas yield for all plastics. This indicates a potentially important contribution of heterogeneous NO reduction mechanisms during plastic reburning at high temperatures. Concerning the homogeneous NO reduction, reburning experiments using simulated plastic pyrolysis gases composed of methane, ethylene, and/or acetylene were carried out at 700–1200 °C in a flow reactor with an initial NO concentration of 1000 ppm and an excess air ratio λ of 0.7. Results for the simulated plastic pyrolysis gases showed NO reduction efficiencies ranging from 30 % to 46 % within the temperature range 950–1200 °C. The presence of acetylene in the simulated pyrolysis gas mixtures appears to facilitate NO reduction. A detailed chemical kinetic model applied to simulate the experiments gave a reasonable prediction of the NO reduction and revealed the important role of the ketenyl radical in removing NO.

Comparison of Waste Plastics Pyrolysis under Nitrogen and Carbon Dioxide Atmospheres: A Thermogravimetric and Kinetic Study

Analysis on low-temperature polyethylene pyrolysis and gasification in different atmospheres

Investigating Kinetic Behavior and Reaction Mechanism on Autothermal Pyrolysis of Polyethylene Plastic

Effects of Temperature on the Pyrolysis Products of Aluminum-Plastic Package Waste

The behavior of heteroatom compounds during the pyrolysis of waste composite plastics

Study on the Pyrolysis Properties of Aluminum-Plastic Package Waste

Thermal degradation of typical plastics under high heating rate conditions by TG-FTIR: Pyrolysis behaviors and kinetic analysis

Synergistic effects of CO2 on complete thermal degradation of plastic waste mixture through a catalytic pyrolysis platform: A case study of disposable diaper

Pyrolysis of Mixed Plastic Waste: I. Kinetic Study

Comparative Analysis of Fuels Derived from PE Plastic Waste with a Mixture of Plastic Recycling Waste of Codes: 1, 2, 4, 5, 6 and 7 Based on Low-Temperature Pyrolysis

Effects of temperature zones on pyrolysis products of mixed plastic waste

Study on the pyrolysis behaviors of mixed waste plastics

Comparative Study on the Synergistic Co-Pyrolysis of Plastics and Rubber Waste: Thermal Behavior and Product Distributions

Thermal behavior, synergistic effect and thermodynamic parameter evaluations of biomass/plastics co–pyrolysis in a concentrating photothermal TGA

Kinetic studies on the pyrolysis of plastic waste using a combination of model-fitting and model-free methods

Kinetic Study of PVC Pyrolysis in Air by Thermogravimetric Analysis Using the Friedman Method

Study of HDPE plastic pyrolysis characteristics using high pressure autoclave

Thermogravimetric study on thermal degradation kinetics and polymer interactions in mixed thermoplastics

Thermal pyrolysis of waste versus virgin polyolefin feedstocks: The role of pressure, temperature and waste composition

Kinetics, Product Evolution, and Mechanism for the Pyrolysis of Typical Plastic Waste

Plastics as a reburning fuel: Pyrolysis at reburning temperatures and NO-reburning by simulated pyrolysis gas