Abstract:Thermal management has become an important issue to be solved in the miniaturization and weight reduction of electronic equipment, especially in the aerospace field. The doped BaTiO3, as a selfregulating heating material, exhibits an attractive application perspective on the thermal control of electrical devices, resulting from its positive temperature coefficient (PTC) property. However, the Curie temperature of most of the doped BaTiO3 material at present is much higher than the operating temperature of the electrical equipment. On this basis, this paper focuses on the controlling of the Curie temperature and thermal control performance of the BaTiO3-based heating component. The polycrystalline Ba1-xSrxTiO3 was synthesized by solid solution reaction. The Curie temperature is tuned by the content of the strontium element, simultaneously the elements Y and Mn are doped to reduce the room temperature resistivity and improve the PTC effect. The X-ray diffraction demonstrates that the bulk phase of the Ba1-xSrxTiO3 generates in the pre sintering process, while the crystallization of composition has completed during the sintering. Importantly, the Curie temperature of doped Ba1-xSrxTiO3 for x=0.3 with average particle size of 4.86 gm has shifted to around 38 C, beyond that exhibiting a 2.8 -orders magnitude of PTCR jump. Results of the thermal control experiment show that, in contrast to the ordinary resistor heater, the heating element based on the BaTiO3 PTC material can achieve lower equilibrium temperature without any auxiliary control methods. Compared to the traditional thermal control system composed by the ordinary resistor, sensor and controller, the novel thermal control system based on PTC heating unit possesses simple structure, lightweight and excellent reliability.

The influence of powders calcination temperature on the properties of BaTiO3-based PTCR ceramics

The Preparation of Fine-Grained Positive Temperature Coefficient Resistance with Superior Electrical Properties

Influence of Sintering Time and Donor Concentration on the PTCR Effect of La-doped BaTiO3-Na0.5Bi0.5TiO3 Ceramics

Low temperature sintering behavior of B2O3 vapor in BaTiO3-based PTCR thermistors

Preparation of Nano BaTiO3-based PTC Ceramics Powder and Its Electrical Properties

The Impact of the Final Sintering Temperature on the Microstructure and Dielectric Properties of Ba0.75Ca0.25TiO3 Perovskite Ceramics

Study on PCTR property of atmospherically sintered YF3-doped barium titanate

Study On Thermal Control Behavior By Using Batio3-Based Ptc Materials With Room Temperature Curie Point

Preparation and electrical properties of semiconducting strontium—lead titanate PTCR ceramics

Medium-low temperature sintered Y-BaTiO3 ceramics modified by B2O3 vapor and its PTCR effect

Positive Temperature Coefficient Resistance Effect in Ba1-xSrxTiO3 Ceramics Modified with Bi2O3 and PbO by a Vapor-Doping Method

Porous single phase PbTiO3 as PTCR ceramics

Influence of La and Y Codoping on the Behaviors of BaTiO_3-based PTC Ceramics

Effects of calcination on the dielectric properties and insulation resistance of Ba0.95Ca0.05TiO3 ceramics sintered in a reducing atmosphere

Study on Positive Temperature Coefficient of Resistivity of Co-Doped BaTiO3 with Curie Temperature in Room Temperature Region

Calcining Temperature Dependence on Structure and Dielectric Properties of CaCu 3 Ti 4 O 12 Ceramics

(Sr, Pb)TiO PTCR ceramics

Abnormal behavior of B2O3 vapor dopants in BaTiO3 based PTCR ceramics

Temperature-dependent resistivity performance of Mn/Y-doped Ba1-xSrxTiO3 compositions with potential thermal control applications

Low temperature fired positive temperature coefficient resistors

Positive Temperature Coefficient Of Resistivety Properties In Yf3-Doped Barium Titanate