Abstract:In this paper, the sensor was proposed by combination of grapefruit photonic crystal fiber (GPCF) and femtosecond laser fabricated fiber Bragg grating (FBG) based on Sagnac interferometer. The GPCF was sandwiched between two single-mode fibers (SMFS) to form a SMF-GPCF-SMF structure, which was based on intermodal interference. The FBG with a central wavelength of 1535.32 nm was inscribed through polyimide coating and cladding by the femtosecond laser point-by-point inscribing method. The spectrum drift data of sensing structure were collected and the dual-parameters matrix of temperature-strain was constructed to realize the simultaneous measurement of temperature and strain. The experimental results showed that the linear range of the strain measurement was from 0 mu epsilon to 2,000 mu epsilon at different temperature, the wavelength of FBG and GPCF was red drift and blue drift, respectively, the average strain sensitivity at different temperature was 1.25 pm/mu epsilon and -2.05 pm/mu epsilon, all the linearity R-2 are higher than 0.999, and has the high repeatability. The linear range of temperature measurement was from 20 degrees C to 450 degrees C, the wavelength of FBG and GPCF was red drift and blue drift, respectively, the temperature sensitivity of FBG and GPCF was 15.17 pm degrees C-1 and -8.87 pm degrees C-1, the linearity was 0.99983 and 0.99989, respectively.

Gaussian-Strain-Chirped Fiber Bragg Grating Couple for Temperature-Insensitive and Intensity-Referenced Force Measurement

Temperature-insensitive Fiber Bragg Grating Force Sensor Via a Bandwidth Modulation and Optical-Power Detection Technique

A Novel Temperature-Independent Double Fiber Bragg Grating Strain Sensor

Cascaded Fabry-Perot Interferometer-Regenerated Fiber Bragg Grating Structure for Temperature-Strain Measurement under Extreme Temperature Conditions.

Intensity-referenced and temperature-independent pressure sensing based a strain-chirped fiber Bragg grating

Simultaneous measurement of temperature and force based on a special-strain-function-chirped FBG

Light Intensity-Referred and Temperature-Insensitive Fiber Bragg Grating Dynamic Pressure Sensor

Simultaneous Force and Temperature Measurement Using S Fiber Taper in Fiber Bragg Grating

Temperature-independent FBG displacement measurement based on bandwidth modulation and optical power detection

<title>Temperatute-independent FBG displacement measurement based on bandwidth modulation and optical power detection</title>

Temperature-Insensitive Fibre-Optic Acceleration Sensor Based On Intensity-Referenced Fibre Bragg Gratings

High Temperature and Strain Dual-Parameters Fiber Sensing Based on Intermodal Interference and Femtosecond Laser Fabricated Fiber Bragg Grating

A Temperature-Independent Force Transducer Using One Optical Fiber with Multiple Bragg Gratings.

FBG-EFPI Sensor for Large Strain Measurement with Low Temperature Crosstalk

Temperature-insensitive Fiber Bragg Grating Dynamic Pressure Sensing System

Simultaneous Force and Temperature Measurement Using Long-Period Grating Written on the Joint of A Microstructured Optical Fiber and A Single Mode Fiber

Strain and Temperature Discrimination Using a Fiber Bragg Grating and Multimode Interference Effects

Temperature-immune and Intensity-Referenced Pressure Sensor Based on Strain-Induced Quadratic-Chirped Fibre Bragg Grating

Air Gap Fiber Bragg Grating for Simultaneous Strain and Temperature Measurement

Fbg-Type Sensor for Simultaneous Measurement of Temperature and Force Based on Reflection Spectrum Broadening

Strain and High-Temperature Discrimination Using A Type Ii Fiber Bragg Grating and A Miniature Fiber Fabry-Perot Interferometer