Abstract:Based on the explicit finite element (FE) software ANSYS/LS-DYNA, the FE model for a sliding lead rubber bearing (SLRB) is developed. The design parameters of the laminated steel, including thickness, density, and Young’s modulus, are modified to greatly enlarge the time step size of the model. Three types of contact relations in ANSYS/LS-DYNA are employed to analyze all the contact relations existing in the bearing. Then numerical simulations of the compression tests and a series of correlation tests on compression-shear properties for the bearing are conducted, and the numerical results are further verified by experimental and theoretical ones. Results show that the developed FE model is capable of reproducing the vertical stiffness and the particular hysteresis behavior of the bearing. The shear stresses of the intermediate rubber layer obtained from the numerical simulation agree well with the theoretical results. Moreover, it is observed from the numerical simulation that the lead cylinder undergoes plastic deformation even if no additional lateral load is applied, and an extremely large plastic deformation when a shear displacement of 115 mm is applied. Furthermore, compared with the implicit analysis, the computational cost of the explicit analysis is much more acceptable. Therefore, it can be concluded that the proposed modeling method for the SLRB is accurate and practical.

Numerical Analysis on Lubrication Performance of Flat Slab Type Water Lubricated Rubber Alloy Bearings

Numerical analysis of concave-slab type water lubricated rubber alloy bearings' lubrication

Two-dimensional Study of Lubrication Mechanism of Water-Lubricated Rubber Alloy Bearing

Numerical analysis of water-lubricated bearings based on ANSYS multi-physics

Numerical Analysis of Lubrication Property for Port Plate Pair of Axial Piston Pump

Experimental and numerical study on the mixed lubrication performances of a new bearing

The Fluid-Structure Interaction Lubrication Performances of a Novel Bearing: Experimental and Numerical Study

Numerical Simulation of Fluid-Structure Interaction of Marine Water-Lubricated Rubber Bearings

Three Dimensional EHL Analyses for Water-lubricated Rubber Bearings with Grooves

Analysis on the Influence of Slat on Frictional Noise of Water Lubricated Rubber Bearing

Analysis of the Interface Lubrication Performances of Water Lubrication Bearing

Simulation Analysis and Research for Flow Field in Rubber Alloy Water-lubricated Bearing

Experimental and numerical exploration on the nonlinear dynamic behaviors of a novel bearing lubricated by low viscosity lubricant

Lubricating Mechanism of Water Lubricated Plastic Alloy Bearings

The Analysis of Elasto-hydrodynamic Lubrication in the Finite-length Journal Bearing

Study on Tribological Behavior of Water-Lubricated Bearings

Explicit Finite Element Analysis and Experimental Verification of a Sliding Lead Rubber Bearing

NUMERICAL SIMULATION STUDY ON WATER-LUBRICATED RUBBER BEARING

Two-way Thermal-Fluid-Solid Interaction Lubrication Characteristic Analysis of Water-lubricated Rubber Bearings

Effect of Surface Topography and Structural Parameters on the Lubrication Performance of a Water-Lubricated Bearing: Theoretical and Experimental Study

The Analysis of Elastohydrodynamic Lubrication in the Textured Journal Bearing