Abstract:Radial shaft sealing rings (RSSR) are important machine elements used in rotating and oil lubricated systems. Their main task is to prevent oil from exiting the system and dirt particles from entering the system. When this function is not fulfilled, a leakage can occur and cause excessive damage after certain operating times, such as gear failure due to insufficient lubrication. This is the reason for the high level of current research interest in seals. The sealing function of RSSR occurs in the contact area between the sealing lip and the shaft. The contact takes place over a very small contact width of approximately 1 μm. These extremely small dimensions and the complex relationships between the functional influencing variables on the radial shaft sealing system make it difficult to simulate wear on the sealing ring. The energetic consideration of the wear process offers the possibility of quantifying influencing variables more easily by their energetic contribution, which can be determined experimentally. Based on experimentally measured total friction moments, and with the help of a semi-analytical (SA) solid contact model based on the half-space theory, this paper presents a modelling approach for the calculation of wear at the sealing ring. The model presented in this work differs from the existing models in two ways. The first particularity is the coupling of SA method with finite element method (FEM) for the resolution of the contact between the sealing lip and the shaft, allowing a fine discretization of the contact zone (by SA method) and the consideration of the structural behavior (by FE method). The SA method compared to the commonly used FEM presents a great saving in computation time. The second particularity is the use of the real data obtained during the wear tests. Most existing simulation models are based purely on contact pressure. This means that through the contact pressure obtained by simulation and a given sliding distance value, a friction energy will be estimated which will be used in a next step using a wear model such as Archad’s to calculate the wear rate. In this publication the value of friction energy was obtained directly on an experimental basis and a more appropriate wear law, such as Fleischer’s, taking into account the friction conditions, was used to estimate the wear rate.

Simulation for Rubber Friction on Self-Affine Surface Based on Energy Method

Asperity-based modification on theory of contact mechanics and rubber friction for self-affine fractal surfaces

Research on simplified tire finite element modeling and simulation method

An Integrated Approach for Friction and Wear Simulation of Tire Tread Rubber. Part I: Friction Test, Characterization, and Modeling

Rate-, state-, and pressure-dependent friction model based on the elastoplastic theory

Investigation of surface textures deterioration on pavement skid-resistance using hysteresis friction models and numerical simulation method

Simulations And Measurements Of Sliding Friction Between Rough Surfaces In Point Contacts: From Ehl To Boundary Lubrication

Rough contact mechanics for graded bulk rheology: The role of small-scale wavelengths on rubber friction

Rubber friction on smooth surfaces

Influence of anisotropic surface roughness on lubricated rubber friction with application to hydraulic seals

Finite Element Method-Based Skid Resistance Simulation Using In-Situ 3D Pavement Surface Texture and Friction Data

Rubber friction and tire dynamics

The Frictional Vibration Attenuation of Rubber Utilizing a Groove on the Body

Energy Dissipation on an Elastic Interface as a Metric for Evaluating Three Friction Models

Friction Energy-Based Wear Simulation for Radial Shaft Sealing Ring

2D Numerical Model for Studying Frictional Sliding

A detailed tire tread friction model considering dynamic friction states

Friction of rubber with surfaces patterned with rigid spherical asperities

Experimental Investigation of Frictional Resistance in Sliding Contact between Undulating Surfaces and Third-Body Particles

Frictional Behaviour of Engineering Surfaces in Overall Lubrication Regimes of Point Contacts

Adhesive Contact of Elastic Solids with Self-Affine Fractal Rough Surfaces