Abstract:Basic properties of fly ash samples from different urban waste combustion facilities in China were analyzed using as X-ray fluorescence (XRF), scanning electron microscopy (SEM), X-ray diffraction (XRD). The leaching toxicity procedure and some factors influencing heavy metals distribution in fly ash were further investigated. Experimental results indicate that the fly ash structures are complex and its properties are variable. The results of XRF and SEM revealed that the major elements (>10000 mg/kg, listed in decreasing order of abundance) in fly ash are O, Ca, Cl, Si, S, K, Na, Al, Fe and Zn. These elements account for 93% to 97%, and the content of Cl ranges from 6.93% to 29.18 %, while that of SiO2 does from 4.48% to 24.84%. The minor elements (1000 to 10000 mg/kg) include Cr, Cu and Pb. Primary heavy metals in fly ash include Zn, Pb, Cr, Cu etc. According to standard leaching test, heavy metal leaching levels vary from 0 to 163.10 mg/L (Pb) and from 0.049 to 164.90 mg/L (Zn), mostly exceeding the Chinese Identification Standard for hazardous wastes. Morphology of fly ash is irregular, with both amorphous structures and polycrystalline aggregates. Further research showed that heavy metals were volatilized at a high furnace temperature, condensed when cooling down during the post-furnace system and captured at air pollution control systems. Generally, heavy metals are mainly present in the forms of aerosol particulates or tiny particulates enriched on surfaces of fly ash particles. The properties of fly ash are greatly influenced by the treatment capacities of incinerators or the variation of waste retention time in chamber. Fly ash from combustors of larger capacities generally has higher contents of volatile component and higher leaching toxicity, while those of smaller capacities often produce fly ash containing higher levels of nonvolatile components and has lower toxicity. The content of heavy metals and leaching toxicity maybe have no convincing correlation, and high alkali content of CaO greatly contribute to leaching toxicity of heavy metal and acid neutralization capacity against acid rain.

Classification of Micro‐Particles in Fly Ash

A general mechanistic model of fly ash formation during pulverized coal combustion

Ultrafine Particle Formation in Pulverized Coal, Biomass, and Waste Combustion: Understanding the Relationship with Flame Synthesis Process

Characteristics Experimental of Fly Ash Release in Combustion Process of Blended Coal

Mineralogy,Morphology and Physical Properties of Fly Ashes

Microstructure of Ferrospheres in Fly Ashes: SEM, EDX and ESEM Analysis

Characterization of Dioxins and Heavy Metals in Chelated Fly Ash

Heterogeneities of Fly Ash Particles Generated from a Fluidized Bed Combustor of Municipal Solid Waste Incineration

Microstructure and Composition of Inhalable Particulate Matter (PM10) from Coal-Fired Power Plants in Southwest China

Properties of Fly Ash in Opposed Multi-Burner Gasifier

Experimental Study on Classification of High Carbon Fly Ash with a Hydrocyclone

Investigation of Basic Properties of Fly Ash from Urban Waste Incinerators in China.

Size fraction characterisation of highly-calcareous and siliceous fly ashes

Study on Characteristics of CFBB Desulfurated Fly Ash and Pulverized Fly Ash

Characterization of fly ash and unburned carbon from CFB boiler with burning Fujian anthracite

Characteristics of particulate matter from emissions of four typical coal-fired power plants in China

Comparative Study on PM_(10) Microstructure and Heavy Metals Distribution in Emissions of Coal Combustion Sources

Intra- and Inter-Particle Heterogeneity of Municipal Solid Waste Incineration Fly Ash Particles

Content and Distribution of Trace Elements and Polycyclic Aromatic Hydrocarbons in Fly Ash from a Coal-Fired CHP Plant

Mechanochemical Treatment of Fly Ash and De Novo Testing of Milled Fly Ash

Enrichment of Heavy Metals and Organic Pollutants in Fly Ash Emitted from CFB During the Combustion of Coal Blended with Petroleum Coke