Abstract:VO2 nanobelts with metal–semiconductor properties were prepared through low temperature hydrothermal reaction and post annealing. X-Ray diffraction (XRD), scanning electron microscopy (SEM), high resolution transmission electron microscopy (HRTEM), differential scanning calorimetry (DSC) and UV-vis-NIR spectrophotometry were employed to investigate the evolution of structure, morphology and properties of the VO2 nanobelts. The results illustrate that the pure VO2 (B) nanobelts can be obtained by hydrothermal reaction. The shape of the nanobelts evolves with hydrothermal temperature, time and reactant concentration. With the increasing of hydrothermal temperature from 160 °C to 200 °C, the nanobelts become homogenous and regular. The regular nanobelts are also obtained by the decrease of V2O5 concentration. Samples prepared at 200 °C over 48 h have superior morphology and crystallinity. After annealing, VO2 (B) can be transformed into VO2 (M), which is dependent on the hydrothermal conditions. Samples prepared at 160 °C over 48 h and 180 °C over 48 h can be transformed into VO2 (M) at 450 °C over 2 h, while samples obtained at 200 °C over 48 h should be annealed at 500 °C for 2 h. The nanobelts are transformed into irregular nanostructures, nanorods and nanobelts at the hydrothermal temperatures of 160 °C, 180 °C and 200 °C, respectively. However, samples prepared at 200 °C over 48 h with a V2O5 concentration of 0.0125 M can keep the intact nanobelts after annealing. The DSC analysis proves that the VO2 (M) shows good phase transition behavior around 68 °C and the phase transition temperature can be reduced to 58 °C by 0.5 at% tungsten doping. After mixing the VO2 (M) with acrylic resin, the visible transmission of the VO2 composite coating on glass is up to 52.2% and the solar modulation at 2000 nm is up to 31.5%, which means that it is a good candidate for smart windows.

Preparation of VO2 Powder by Deoxidizing V2O5

Deoxidization of V2o5 Powder into Vo2 Assisted by an Electrochemical Lithium Intercalation Technique

Isothermal reduction of V2O5 powder using H2 as oxygen carrier: Thermodynamic evaluation, reaction sequence, and kinetic analysis

Preparation and Electrocatalytic Properties of Perovskite Type Oxides CaVO 3 for Oxygen Reduction Reaction

The Structure and Electrochemical Performance of V2O5 Powder Prepared by Hydrothermal Synthesis at Various Acidification Conditions

A clean process of preparing VO as LIBs anode materials via the reduction of V2O3 powder in a H2 atmosphere: Thermodynamic assessment, isothermal kinetic analysis, and electrochemistry performance evaluation

Effect of V2O5 addition on the oxidation induration process of Hongge vanadium titanomagnetite pellet

Study of V<sub>2</sub>O<sub>5</sub> Direct Alloying Reductants

Microwave Hydrothermal Preparation of VO2

A liquid approach for the synthesis of M phase VO2 nanocrystals: Facile synthesis, characterization and reaction mechanism

Study of Preparation and Characteristics Optimization of VO2 (B) Thin Films

Direct Reduction of Solid V2O5 with Hydrogen at 600–1400 °C

A Facile Process to Prepare One Dimension VO2nanostructures with Superior Metal–semiconductor Transition

Short-Process Preparation of High-Purity V2O5 from Shale Acid Leaching Solution via Chlorination

Preparation and characterization of thermally stable high surface area mesoporous vanadium oxides

Reactivity of Vanadium Nanoparticles with Oxygen and Tungsten

RESEARCH ON PHASE INGREDIENT OF VIOLET TUNGSTEN OXIDE DURING DEOXIDIZATION

Structural phase transition of tungsten-doped vanadium dioxide nanopowders prepared by thermolysis

Study on Chemical States of VO2 Thin Films Prepared by Sol-gel Method

Simple Method Preparation for Ultrathin VO2 Thin Film and Control: Nanoparticle Morphology and Optical Transmittance

A novel method to prepare high-purity V2O5 from Na3VO4 solution