Abstract:Most of work on polymer/layered silicate nanocomposites (PLSN) focused on the importance of the chemistry used to modify the surface of the clay, usually montmorillonite (MMT) and characterization of the nano-scale structure obtained in the last decade. The role and importance of processing has been paid attention only recently. Our purpose of this study is to determine the effect of the chemistry and shear on the dispersion of clay in polymer matrix via dynamic packing injection molding (DPIM), in which the melt is firstly injected into the mold then forced to move repeatedly in a chamber by two pistons that moved reversibly with the same frequency as the solidification progressively occurs from the mold wall to the molding core part. A special orientation region between the skin region and the core region is produced via imposing the reversible shear effect during the cooling of the melt. The initial MMT and organic modified MMT (abbreviated as OMMT) were directly injection molded with powdered iPP in the DPIM without pre-extrusion. Without shearing, only an intercalated structure was obtained through organic modification and the diameter of OMMT particles has a significant reduction compared to the initial MMT. Under the effect of shear, however, an intercalated morphology in the oriented region and an exfoliated morphology in the core region can be achieved. Our result suggests that both the chemistry and shear are important to determine the dispersion of clay in polymer matrix. PP/clay nanocomposites with excellent impact strength can be prepared via simple one step, direct injection molding without a conventional pre-extrusion, by dynamic packing injection molding. The observed change of impact strength could be related to the local hierarchical structure developed during the processing.

The dynamics of montmorillonite clay dispersion and morphology development in immiscible ethylene–propylene rubber/polypropylene blends

Synergetic Effect of a Reactive Compatibilizer and Organo-montmorillonite on the Dispersion of Polyamide 6 /Polydimethylsilicone Blend with a High Viscosity Ratio

In-situ Synthesis, Thermal and Mechanical Properties of Biobased Poly(ethylene 2,5-Furandicarboxylate)/montmorillonite (PEF/MMT) Nanocomposites

Structure-property relationships in isotactic poly(propylene)/ethylene propylene rubber/montmorillonite nanocomposites

Rheology of Poly(lactic Acid)/poly(trimethylene Terephthalate) Blends Compatibilized by Clay or Maleic Anhydride-Grafted Poly(ethylene-Octene) Elastomer

TOUGHENING OF ETHYLENE-PROPYLENE RANDOM COPOLYMER/CLAY NANOCOMPOSITES： COMPARISON OF DIFFERENT COMPATIBILIZERS

PREFERENTIAL INTERCALATION BEHAVIOR OF CLAY AND ITS EFFECT ON THE THERMAL DEGRADATION IN IMMISCIBLE PP/PS BLENDS

Rheology of Polypropylene/Clay Hybrid Materials

The interplay of thermodynamics and shear on the dispersion of polymer nanocomposite

Preparation of poly(propylene)/clay layered nanocomposites by melt intercalation from pristine montmorillonite (MMT)

Morphology, rheology, and mechanical properties of polylactide/ poly(ethylene-co-octene) blends

Effect of Polyethylene Glycol-Intercalated Organoclay on Vulcanization Characteristics and Reinforcement of Natural Rubber Nanocomposites

Deformation and Molecular Orientation in Films of Metallocene Polypropylene, Ethylene-Butylene Rubber, and Their 80/20 (W/W) Blend Revealed by the Simultaneous Kinetic Measurement of Microscopic Infrared Dichroism, Macroscopic Stress, and Mesoscale Strain

Rheological Behavior and Nonisothermal Crystallization of Polypropylene/Epoxidized Natural Rubber Blends

Influence of Polarity on the Preferential Intercalation Behavior of Clay in Immiscible Polypropylene/Polystyrene Blend

Effect of Multi-Monomer Grafted Polyolefin Elastomer/Polypropylene on the Structure and Properties of Polypropylene/Montmorillonite Nanocomposites

Rheology, Morphology and Thermal Properties of a PLA/PHB/Clay Blend Nanocomposite: The Influence of Process Parameters

Influences of Compatibilizers on Rheology and Mechanical Properties of Propylene Random Copolymer/styrene‐ethylene‐butylene‐styrene Block Copolymer/organic‐montmorillonite Nanocomposites

Effect of Mixing Sequence on Phase Morphology and Mechanical Properties in Polyamide 6/butadiene (core) Styrene Acrylonitrile-G-Maleic Anhydride (shell) Latex/Organoclay Ternary Nanocomposites

Solid-State Graft Polymerization Of Styrene In Spherical Polypropylene Particles In The Presence Of Montmorillonite

The Steady Rheological Behavior of Polyethylene/ethylene Vinyl Acetate Copolymer/montmorillonite Exfoliated Nanocomposites