Separate/simultaneous catalytic reduction of sulfur dioxide and/or nitric oxide by carbon monoxide over titanium–tin solid solution catalysts

Zhang Zhaoliang,Ma Jun,Yang Xiyao
DOI: https://doi.org/10.1016/S1385-8947(03)00061-5
IF: 15.1
2003-01-01
Chemical Engineering Journal
Abstract:Titanium–tin solid solutions prepared by coprecipitation were studied for the separate and simultaneous catalytic reduction of SO2 and/or NO by CO. Physicochemical characterizations of the solid solutions before and after reactions with different SnO2 contents were conducted to disclose the reaction mechanism by means of XRD, CO–TPR, XPS and transient MS techniques. It is found that TiO2–SnO2 solid solutions were very active towards the reduction of SO2 by CO at a low temperature and space velocity. There existed a strong synergistic promoted effect, which can be explained based on an enhanced redox mechanism proposed in the work. Furthermore, TiO2–SnO2 solid solutions would show a pronounced increase in catalytic activity during the reduction of NO by CO after the catalysts finished SO2+CO reactions, or by introducing SO2 into the reaction feed. This promoting effort is due to the formation of tin sulfide species as a product of the reduction of SO2 by CO on the catalyst surface. A NO decomposition mechanism with the formation of SO2 by-product was proposed. The produced SO2 was in situ catalytically reduced to sulfur to regenerate tin sulfide. Lastly, simultaneous catalytic reduction of SO2 and NO using CO as a reducing agent was carried out on TiO2–SnO2 solid solution catalysts. Experimental results showed that at a temperature above 350°C, SO2 and NO conversions are greater than 91 and 99%, respectively.
What problem does this paper attempt to address?