Abstract:A series of Sn(x)Zr(1=x)O(2) solid solution catalysts was prepared by co-current coprecipitation method using ammonia solution as precipitation agent and calcined at 500 degreesC for 4 It in air. Among them, the sample containing SnO(2) [w (SnO(2)) = 60%] showed the highest NO conversion of 71% at 350 degreesC, with 1.212 x 10(-3) NO, 1.095 x 10(-3) C(3)H(6) and 2.09% O(2) in He at a space velocity of 17000 h(-1). In comparison, the sample SZ160E2 comprising SnO(2) [w (SnO(2)) = 60%] was prepared by urea-based homogeneous precipitation method, which showed a higher NO conversion of 74% at 350 degreesC. Furthermore, the catalytic performance of SZ160E2 was examined thoroughly with different concentration of oxygen and propene, or at different temperature and space velocity, and the performance under steam was studied as well. The results illuminated that Sn(x)Zr(1-x)O(2) solid solution catalysts could sustain moderate activity after calcined at a temperature above 800 degreesC, at a high space velocity of 50000 h(-1), in the presence of excess O(2) content of 8.0% (lean-burn condition) or after steam treatment for 12 h. The best C(3)H(6)/NO molar ratio for SZ160E2 was from 1.24 to 1.65 and in this region about 80% NO could be reduced to the harmless N(2) at 350 degreesC. It was shown that Sn(x)Zr(1-x)O(2) solid solution catalysts had good thermal stability and hydrothermal stability, and could be used under lean-burn conditions and a high space velocity. According to the conversion of C(3)H(6) to CO(2) in NO-SCR reaction, we conclude that the combustion activity of propene was restrained and the activity for NO reduction was enhanced at the same time due to the insertion of zirconium ions into the crystal lattice of tin dioxide.

Catalytic performance of novel Sn(x)Zr(1-x)O(2) solid solution catalysts for NO selective reduction by propene under lean-burn conditions

Lean NOx reduction over Sn1−xZrxO2 solid solutions

Catalytic performance of MnO 2-CeO 2/Ti 0.25Zr 0.25Al 0.5O 1.75 monolith catalyst for low temperature selective catalytic reduction of NO with NH 3

Selective catalytic reduction of NO with propene over yttrium doped Snx Zr1- x O2 solid solution catalysts under lean burn conditions

Effect of Doped Metal Oxides on Performance of Snxzr1-Xo2 Solid Solution Catalysts for No Selective Reduction

Structure Characteristic of Novel SnxZr1-xO2 Solid Solution Catalysts for NO Selective Reduction

Sn-X Ti1-X O-2 Solid Solution Catalysts for Nitrogen Oxide Selective Catalytic Reduction by Propene in Presence of Oxygen

Structure Characteristics and NO Selective Catalytic Reduction Property of Sn x Zr 1- x O 2 Solid Solution Catalysts

Selective reduction of NOx with propene over SnO2/Al2O3 catalyst]

Low-temperature selective catalytic reduction of NO with propylene in excess oxygen over the Pt/ZSM-5 catalyst.

The structure of CuO-ZrO2 mixed oxides and its influence on the catalytic selective reduction of NO by propene

High Activity Sno2/Al2o3 Catalyst For No Reduction In The Presence Of Oxygen

Selective Catalytic Reduction of NOx with Propene over SnO2/Al2O3 Catalyst

The Activity and Characterization of Sol-Gel Sn/Al2o3 Catalyst for Selective Catalytic Reduction of Nox in the Presence of Oxygen

Cooperation of Ag/Al2O3 and Sn/Al2O3 Catalysts for the Selective Reduction of NO by Propene

Selective Catalytic Reduction of NO over Mo/ZSM-5 Catalyst

Co Single Atoms and CoOx Nanoclusters Anchored on Ce0.75Zr0.25O2 Synergistically Boosts the NO Reduction by CO

Cooperation of Pt/Al2O3 and In/Al2O3 Catalysts for NO Reduction by Propene in Lean Burn Condition

High Efficiency of Noble Metal and Metal Oxide Catalyst Systems for the Selective Reduction of NO with Propene in Lean Exhaust Gas

No Reduction by Ch4 in the Presence of Excess O-2 over Mn/Sulfated Zirconia Catalysts

Separate/simultaneous catalytic reduction of sulfur dioxide and/or nitric oxide by carbon monoxide over titanium–tin solid solution catalysts