Abstract:TiO2-promoted cobalt sulfides, which were prepared by pre-sulfiding with H2S/H-2 the titanium-cobalt oxides prepared by coprecipitation method in order to get an intimate contact between them, were studied for the separate and simultaneous reduction of SO2 and/or NO by CO. Physicochemical characterizations of the catalysts before and after reactions were conducted to disclose the reaction mechanism by means of XRD, BET, XPS and transient MS techniques. It is found that TiO2-promoted cobalt sulfides were more active catalysts for the reduction of SO2 by CO than the mechanical mixtures of the components. There exists a strong synergistic promoted effect, which can be explained based on a COS enhanced redox mechanism proposed in the work. Furthermore, not only the addition of NO had little effect on this reaction, but also a combined reduction of SO2 and NO by CO occurred in a gas mixture comprising very low concentrations of them. The reduction of NO is explained by a NO decomposition mechanism over sulfides with the formation of by-product, SO2, based on the MS results. There also exists a synergistic effect between cobalt sulfide and TiO2. The produced SO2 can further be reduced over TiO2 to sulfur, which might spill over to cobalt sites to regenerate cobalt sulfide. The SO2 + NO + CO reaction was proposed to proceed via two separate reactions of SO2 + CO and NO decomposition. However, the two reactions are interrelated. The reaction between CO and cobalt sulfide to produce COS intermediate is a necessity for the further reduction reaction of SO2 on TiO2; while SO2, one of the products of NO decomposition on cobalt sulfide, is recovered to sulfur on TiO2 by SO2 + CO reaction. Lastly, CO2 was found to promote the production of COS, but has little effect at levels around 1000 ppm. (C) 2002 Elsevier Science B.V. All rights reserved.

Titanium-Promoted Cobalt Sulfide Catalysts for No Decomposition and Reduction by Co

Separate/Simultaneous Catalytic Reduction Of Sulfur Dioxide And/Or Nitric Oxide By Carbon Monoxide Over Tio2-Promoted Cobalt Sulfides

Separate/simultaneous catalytic reduction of sulfur dioxide and/or nitric oxide by carbon monoxide over titanium–tin solid solution catalysts

Unveiling the Role of Cobalt Species in the Co/N-C Catalysts-Induced Peroxymonosulfate Activation Process.

The Mechanism of So2, No and Co Reaction over Sn0.5ti0.5o2 Catalyst

DIRECT DECOMPOSITION OF NITRIC OXIDE UPON CATALYST DERIVED FROM CALCINED Co-Al HYDROTALCITE-LIKE COMPOUND

SO 2 -Assisted Simultaneous Reduction of SO 2 and NO by CO on SnO 2 -Tio 2 Solid Solution

Sno2-Tio2 Solid Solution Catalyst for Simultaneous Reduction of So2 and No by Coiii. Catalyst Active Sites and Reaction Mechanism

Co Single Atoms and CoOx Nanoclusters Anchored on Ce0.75Zr0.25O2 Synergistically Boosts the NO Reduction by CO

Investigation on Fe-Co Binary Metal Oxides Supported on Activated Semi-Coke for NO Reduction by CO

Studies of Ti0.5zr0.5o2 Supported Cuo Catalysts for No+Co Reaction

Bifunctional Catalyst of CuMn-HZSM-5 for Selective Catalytic Reduction of NO and CO Oxidation under Oxygen Atmosphere

Simultaneous catalytic reduction of NO and SO2 with CO over Fe/γ-Al2O3 catalysts

CuO/Sn_(0.8)Ti_(0.2)O_2 Catalyst: Characterization and Catalytic Performance in NO+CO Reaction

Dispersion, Reduction and Catalytic Performance of CuO Supported on ZrO2-doped TiO2 for NO Removal by CO

Unraveling the Promotional Effect of Co on the Pd/TiO2 Catalyst for H2-SCR of NOx in the Presence of Oxygen

Synergistic Effects of Ternary PdO-CeO2-OMS-2 Catalyst Afford High Catalytic Performance and Stability in the Reduction of NO with CO

Constructing Efficient CuO -Ceo2 Catalyst for NO Reduction by CO: New Insights into the Structure–activity Relationship

Comparative study on transition element doped Mn–Zr–Ti-oxides catalysts for the low-temperature selective catalytic reduction of NO with NH3

Catalytic NO Reduction by CO over Ceria-Cobalt Oxide Catalysts

Effect of reduction on NO + CO reaction performance of CuO-Co3O4 symbiotic oxide porous nanosheet and DFT calculation