Abstract:Friction compensation is particularly important for motion trajectory tracking control of pneumatic cylinders at low speed movement. However, most of the existing model-based friction compensation schemes use simple classical models, which are not enough to address applications with high-accuracy position requirements. Furthermore, the friction force in the cylinder is time-varying, and there exist rather severe unmodelled dynamics and unknown disturbances in the pneumatic system. To deal with these problems effectively, an adaptive robust controller with LuGre model-based dynamic friction compensation is constructed. The proposed controller employs on-line recursive least squares estimation (RLSE) to reduce the extent of parametric uncertainties, and utilizes the sliding mode control method to attenuate the effects of parameter estimation errors, unmodelled dynamics and disturbances. In addition, in order to realize LuGre model-based friction compensation, the modified dual-observer structure for estimating immeasurable friction internal state is developed. Therefore, a prescribed motion tracking transient performance and final tracking accuracy can be guaranteed. Since the system model uncertainties are unmatched, the recursive backstepping design technology is applied. In order to solve the conflicts between the sliding mode control design and the adaptive control design, the projection mapping is used to condition the RLSE algorithm so that the parameter estimates are kept within a known bounded convex set. Finally, the proposed controller is tested for tracking sinusoidal trajectories and smooth square trajectory under different loads and sudden disturbance. The testing results demonstrate that the achievable performance of the proposed controller is excellent and is much better than most other studies in literature. Especially when a 0.5 Hz sinusoidal trajectory is tracked, the maximum tracking error is 0.96 mm and the average tracking error is 0.45 mm. This paper constructs an adaptive robust controller which can compensate the friction force in the cylinder.

Study on Friction Force Model of Cylinder in Low-speed Motion

Analysis of Friction Characteristics of Pneumatic Cylinders Based on LuGre Model

Impact of the Piston Secondary Motion on Its Slap Force

The Simulation Study of a New-Type Frictionless Pneumatic Cylinder

Modeling and Simulation of Stick-Slip Motion for Pneumatic Cylinder Based on Meter-In Circuit

Differential Model of Friction Based on Bristle Model and Phase-Transition Theory

Experiment on friction characteristics of pneumatic cylinders base on LuGre model

Parameters identification and analysis of pneumatic cylinders friction model based on experiments

Development on Friction Measurement System for Pneumatic Cylinders

Stick-slip characteristics of pneumatic cylinder based on meter-in circuit

Adaptive Robust Motion Trajectory Tracking Control of Pneumatic Cylinders with LuGre Model-Based Friction Compensation

Model generation and parametric study of stick-slip induced vibration for mechanics under friction

Non-smooth Model and Numerical Analysis of a Friction Driven Structure for Piezoelectric Motors

Modeling, Stability and Stick-Slip Behaviour Analysis of Coke Pushing System

Stick-Slip Motion of A Resin-Steel Contact at Low Speeds

Modeling and Design of A Frictionless Pneumatic Cylinder System with Air Bearings

Analysis of the critical Stick–slip velocity of CNC machine tool combining friction parameters identification and dynamic model

Mechanism Analysis and Improved Model for Stick-Slip Friction Behavior Considering Stress Distribution Variation of Interface

Dynamics of a three-module vibration-driven system with non-symmetric Coulomb’s dry friction

Dynamic analysis of planar mechanical systems considering stick-slip and Stribeck effect in revolute clearance joints

Analysis of friction fluctuations mechanism of a preloaded roller linear motion guide based on a new 5-DOF dynamic stiffness model