Abstract:Friction compensation is particularly important for motion trajectory tracking control of pneumatic cylinders at low speed movement. However, most of the existing model-based friction compensation schemes use simple classical models, which are not enough to address applications with high-accuracy position requirements. Furthermore, the friction force in the cylinder is time-varying, and there exist rather severe unmodelled dynamics and unknown disturbances in the pneumatic system. To deal with these problems effectively, an adaptive robust controller with LuGre model-based dynamic friction compensation is constructed. The proposed controller employs on-line recursive least squares estimation (RLSE) to reduce the extent of parametric uncertainties, and utilizes the sliding mode control method to attenuate the effects of parameter estimation errors, unmodelled dynamics and disturbances. In addition, in order to realize LuGre model-based friction compensation, the modified dual-observer structure for estimating immeasurable friction internal state is developed. Therefore, a prescribed motion tracking transient performance and final tracking accuracy can be guaranteed. Since the system model uncertainties are unmatched, the recursive backstepping design technology is applied. In order to solve the conflicts between the sliding mode control design and the adaptive control design, the projection mapping is used to condition the RLSE algorithm so that the parameter estimates are kept within a known bounded convex set. Finally, the proposed controller is tested for tracking sinusoidal trajectories and smooth square trajectory under different loads and sudden disturbance. The testing results demonstrate that the achievable performance of the proposed controller is excellent and is much better than most other studies in literature. Especially when a 0.5 Hz sinusoidal trajectory is tracked, the maximum tracking error is 0.96 mm and the average tracking error is 0.45 mm. This paper constructs an adaptive robust controller which can compensate the friction force in the cylinder.

Modeling and Simulation of Stick-Slip Motion for Pneumatic Cylinder Based on Meter-In Circuit

Stick-slip characteristics of pneumatic cylinder based on meter-in circuit

Analysis of Friction Characteristics of Pneumatic Cylinders Based on LuGre Model

Experiment on friction characteristics of pneumatic cylinders base on LuGre model

Modeling of a pneumatic system for high-accuracy position control

The Simulation Study of a New-Type Frictionless Pneumatic Cylinder

Parameters identification and analysis of pneumatic cylinders friction model based on experiments

Synchronization Strategy Research Of Pneumatic Servo System Based On Separate Control Of Meter-In And Meter-Out

Adaptive Robust Motion Trajectory Tracking Control of Pneumatic Cylinders with LuGre Model-Based Friction Compensation

Modeling of Separate Meter in and Separate Meter out Control System

Modeling and Analysis of Hydraulic Controlled Rotary Valve Excitation System

Precision Trajectory Tracking Control of a Pneumatic Cylinder and Output Stiffness Regulation

Improvement and Comparison of Pneumatic Control Valve Stiction Models

Modelling and Simulation of Joint Actuated by Pneumatic Muscles

Development on Friction Measurement System for Pneumatic Cylinders

Mathematical Modeling and Simulation of Pneumatic Nail Gun

Analysis and Modeling for Electro-pneumatic AMT System

Modelling and Experiment Study on Fluid Character of Axial Piston Pump

Structural Dynamics Modeling and Simulation of Hydraulic Cylinder on the Location of Whole Stroke

Modeling of Pneumatic Dual Reciprocating Bellows Pump with Flexible Linkage

Numerical Simulation of Overturning Phenomenon of Axial Piston Pump Slipper Pair