Abstract:The limit working parameters and service life of axial piston pump are determined by the carrying ability and lubrication characteristic of its key friction pairs. Therefore, the design and optimization of the key friction pairs are always a key and difficult problem in the research on axial piston pump. In the traditional research on piston/cylinder pair, the assembly relationship of piston and cylinder bore is simplified into ideal cylindrical pair, which can not be used to analyze the influences of radial micro-motion of piston on the distribution characteristics of oil-film thickness and pressure in details. In this paper, based on the lubrication theory of the oil film, a numerical simulation model is built, taking the influences of roughness, elastic deformation of piston and pressure-viscosity effect into consideration. With the simulation model, the dynamic characteristics of the radial micro-motion and pressure distribution are analyzed, and the relationships between radial micro-motion and carrying ability, lubrication condition, and abrasion are discussed. Furthermore, a model pump for pressure distribution measurement of oil film between piston and cylinder bore is designed. The comparison of simulation and experimental results of pressure distribution shows that the simulation model has high accuracy. The experiment and simulation results demonstrate that the pressure distribution has peak values that are much higher than the boundary pressure in the piston chamber due to the radial micro-motion, and the abrasion of piston takes place mainly on the hand close to piston ball. In addition, improvement of manufacturing roundness and straightness of piston and cylinder bore is helpful to improve the carrying ability of piston/cylinder pair. The proposed research provides references for designing piston/cylinder pair, and helps to prolong the service life of axial piston pump.

Impact of the Piston Secondary Motion on Its Slap Force

Calculation and Analysis of Piston Thermal Shock by Using Plate Model

The Analysis of Secondary Motion and Lubrication Performance of Piston considering the Piston Skirt Profile

Analysis of Friction Characteristics of Pneumatic Cylinders Based on LuGre Model

FEM Based Simulation Study on Static and Dynamic Properties of Port Plate in Axial Piston Pump

A Study on Heat Transfer Model for the Dynamic Contact Boundary Between Piston Ring and Cylinder Liner

The Effect of Slotted Hole on Minimum Oil Film Thickness of Piston in Radial Piston Hydraulic Motor

Simulation and Experimental Research on Piston Secondary Motion

A Numerical Analysis for Piston Skirts in Mixed Lubrication: Part II—Deformation Considerations

Investigation on the Radial Micro-Motion about Piston of Axial Piston Pump

Effects of the connecting-rod-related design parameters on the piston dynamics and the skirt–liner lubrication

The Piston Slap Force Reconstruction of Diesel Engine Using WOA-VMD and Deconvolution

Effect of Piston Profile on Piston Motion and Liner Bore Polishing

58812 ANALYSIS OF THE PISTON/CYLINDER PAIR OF AXIAL PISTON PUMP BASED ON VIRTUAL PROTOTYPE(Fluid-Structure Interaction in MBS)

Friction and Wear Performance of Double-bump Design of Piston Skirt Main Thrust Side

The Tribo-Dynamics Performance of the Lubricated Piston Skirt–Cylinder System Considering the Cylinder Liner Vibration

Investigation on Structural Optimization of Anti-Overturning Slipper of Axial Piston Pump

Analyses of Piston Skirts in Mixed Lubrication Taking into Account Surface Characteristics and Elastic Deformation.

A Review of Dynamic-Tribological Simulation Methods for Sliding Bearings in Internal Combustion Engines

Numerical Simulation of Overturning Phenomenon of Axial Piston Pump Slipper Pair

Analysis of friction in surface textured components of reciprocating mechanism