Abstract:With the continuous improvement of aviation engine performance, the engine rotor’s working speed is above the first critical speed, and some small engine rotor’s operating speed exceeds the second critical speed, thus most of the aircraft engine rotor is now flexible rotor. The primary goal of this research is to provide a new method without trial weights for flexible rotor balancing, which is based on the traditional modal balancing method and combines the dynamic characteristics of the rotor, such as the model shape, obtained by using finite element analysis software, the critical speed, the modal damping ratio, and so on. To demonstrate the validity and accuracy of the new method, two experiments are carried out. One is on a four-disk simply supported structure rotor experiment, which is balanced by using three balancing planes. After balancing the amplitude of the rotor through the first critical speed is reduced 80%. The other is on a turboshaft engine power turbine rotor which had been balanced quite well. The initial amplitude of the turboshaft engine power turbine rotor is 0.05 mm when it rotates at low speed, and the maximum amplitude is just 0.12 mm when it rotates at the first critical speed. After balancing the amplitude of the rotor through the first critical speed is reduced to 0.06 mm. The results of the experiments indicate that the new without trial weights method is a significant effective method for the flexible rotor dynamic balancing, and it will be widely used to balance the engine rotor.

Experimental research of measuring static balance of gyro rotor through weighing

Method of Measuring the Static Balance through Weighing the Specific Structure Gyroscope Rotor

Rigid Rotor Dynamic Balancing by Two-Plane Correction with the Influence Coefficient Method

Rigid Rotor Dynamic Balancing with the Influence Coefficient Method

Study on Static Balance Measurement of Gyroscope

The Design of Dynamic Balancing Machine Based on Finite Element Analysis

The Design Study of Single Plane Vertical Hard Bearing Dynamic Balancing Machine

Measurement of Static Balance for Incomplete Spherical Superconducting Rotor with Compressed Air

STUDY ON HIGH ACCURACY BALANCING METHODS FOR HUGE ROTOR

Weight Estimation of Rotor Eccentric Load Based on Acceleration Sensor

A Balancing Method for Multi-Disc Flexible Rotors without Trial Weights

Balancing of Flexible Rotors without Test Weights

A METHOD TO SELECT WEIGHTS IN ONLINE DYNAMIC BALANCE TECHNOLOGY BASED ON ROTOR-ACTIVE MAGNETIC BEARING SYSTEM

A New Field Unbalance Estimation Method For Flexible Rotors

Study on Dynamic Balance Weighting for Single-Disk Rotor System Based on Phase Difference Mapping

The Study on Mode Dynamic Balance Method for Rotor System with Bow

Balancing of flexible rotors without trial weights based on finite element modal analysis

A novel rotor dynamic balancing method based on blade tip clearance measurement without the once per revolution sensor

An identification method of distributed imbalance without trial weights for high speed rotors

Research on Field Balancing of Rotor