Abstract:By using chemical reduction-deposition method,a metallic nickel-decorated multi-walled carbon nanotube material,symbolized as x%Ni/CNTs,was prepared.TEM and XRD measurements demonstrated that the metallic nickel was evenly coated onto the carbon nanotube substrate,with granule-diameter of the Ni_x~0-crystallites at ～12 nm.The H_2-TPD and CO-TPD measurements showed that the modification of metallic nickel to the CNTs resulted not only in a significant increase in the total amounts of its adsorbing hydrogen and CO,but also in pronounced enhance of the proportion of the dissociatively adsorbed hydrogen H(a) and strongly chemisorbed CO(a) in their respective total amount of adsorption.With this composite nano-carbon material as an additive,a co-precipitated Cu_6Zn_3Al_1-12.5%(8%Ni/CNT) catalyst was prepared.The assay of its catalytic activity for methanol synthesis from syngas showed that under the reaction conditions of 2.0 MPa,V(H_2)/V(CO)/V(CO_2)/V(N_2)=62/30/5/3,GHSV=2 700 mL(STP)·h~(-1)·(g-catal.)~(-1),the observed CO conversion and methanol STY reached 34% and 442 mg·h~(-1)·(g-catal.)~(-1),which was about 38% and 17% higher than those over the Cu_6Zn_3Al_1 and Cu_6Zn_3Al_1-12.5%CNT catalysts, respectively,at the respective optimal operation temperature,513 K and 503 K.The results of the present work indicated that the nickel-modified CNTs could serve as a promoter more excellent than the simple CNTs.Its unique feature of promoting adsorption/spillover of hydrogen and CO would be beneficial to generating microenvironments with higher stationary-state concentration of active hydrogen-adspecies and chemisorbed CO(a) on surface of the functioning catalyst,and thus be favorable to increasing the rate of the CO hydrogenation reactions.

Preparation and Electromagnetic Properties of Ni-Coated Multi-Wall Carbon Nanotubes

Preparation and Electromagnetic Shielding Performance of Multi-metal Coated Carbon Nanotubes

Preparation, Mechanical and Electrical Properties of Carbon Micro- and Nanocoils

Influence on (Ni-P) Electroless Composite Plating with Carbon Nanotubes

Preparation and characterization of multi-walled carbon nanotubes with nickel–phosphorous layers of high magnetic properties

Ultrasonic spray preparation of chemical Ni-plating carbon nanotubes and microwave absorbing properties

Preparation and Tribological Properties of the Carbon Nanotubes–ni–p Composite Coating

Study on Chemical Nickel-plating for CNTs and Its Electro-magnetic Behavior

Carbon Nanotubes with Nickel-Cobalt Alloy Coating

SYNTHESIS AND THE PERFORMANCE OF CARBON NANOTUBES-(Ni-P) COMPOSITES

Preparation and electromagnetic properties of multiwalled carbon nanotubes/Ni composites by γ-irradiation technique

Carbon Nanotubes Electroless Plating Ni-Co-P Ternary Alloy

The Microstructure of Ni Layer on Single-Walled Carbon Nanotubes Prepared by an Electroless Coating Process

Preparation and Electrical Performance of Nickel-coated CNT Film

Electrodeposition and Mechanical Characterization of Ni-carbon Nanotubes Composite Coatings

Preparation and magnetic property of the composite of nitrogen-doped carbon nanotubes decorated with nickel nanoparticles

Preparation and Characterization of a Material of Carbon Nanotubes Decorated by Nickel

Preparation and magnetic property of Ni nanoparticles filled carbon nanotubes

Tribological properties of Ni–P-multi-walled carbon nanotubes electroless composite coating

The Lattice Change of Ni-P Layer Coated on Single-Walled Carbon Nanotubes

The High Thickness Ni Layer on Single-Walled Carbon Nanotubes Prepared by an Electroless Coating Process