Abstract:Laminate composites contain holes as a means of connection in industrial applications. A better understanding of the mechanical properties of open-hole components is necessary. Herein, progressive damage postbuckling analysis models are proposed for investigation of tensile damage and compressive buckling behaviors of open-hole laminate composites. The progressive damage model is based on failure criteria provided by the continuum damage mechanics model; virtual crack closure technology was employed to calculate the energy release rate for crack delamination in compressive postbuckling analysis. The models were utilized to analyze variations in the tensile and compressive mechanical properties, failure process, and buckling evolution of open-hole laminate composites using finite element analysis. The tensile failure patterns and failure processes of plies with different open-hole laminate composite angles were obtained and analyzed. Buckling characteristics, as well as the progression of buckling onset, buckling propagation, crack delamination, unstable delamination, and global buckling, were investigated. The influence of delamination crack length and crack distribution on the buckling properties of open-hole laminate composites are discussed in detail. Additionally, unstable and stable buckling characteristics were examined. The numerical results were in good agreement with theoretical and experimental results; damage initiated at the edge of a hole propagated to two sides with the onset of matrix damage, followed by fiber damage. The fiber damage of a 0°-ply led ultimately to laminate failure. The laminate with a symmetrical crack distribution showed stable buckling, whereas a short, nonsymmetrical distribution of cracks usually led to unstable buckling and delamination.

An Effective Progressive Damage Analysis Method for Failure Analysis of Composite Scarf Joint

Progressive failure analysis of 2D woven composites at the meso-micro scale

Damage Analysis of Composite Laminate with Large Open-hole under Compression Using 3D Strain Progressive Damage Theory

A Progressive Damage Model of Composite Laminates under Low-Velocity Impact

RESEARCH ON FATIGUE LIFE FOR 3D COMPOSITE LAMINATES BASED ON PROGRESSIVE DAMAGE

Failure Analysis of Notched Composite Laminate with 3D Continuum Damage Mechanics

Tensile Progressive Damage and Compressive Postbuckling Analysis of Open-Hole Laminate Composites

Finite Element Analysis of Composite Honeycomb Sandwich Structure with Penetrated Damage and Its Repaired Structure

Micromechanical Progressive Damage Analysis of Inter- and Intra-Layer Failures in Fiber-Reinforced Composite Laminates

Analysis of Damaging Failure of Composite Laminates

Delamination Propagation and Compressive Strength Prediction of Laminated Composite

Adhesive damage and defect analysis of scarf-repaired composite by combining extended finite element method and cohesive zone model

Progressive Damage Simulation of Scaling Effects on Open-Hole Composite Laminates under Compression

Progressive Damage Based Failure Analysis of Open-hole Composite Laminates under Tension

Progressive Damage Simulation of Open-Hole Composite Laminates under Compression Based on Different Failure Criteria

Progressive Failure Analysis of Carbon Fiber/epoxy Composite Laminates Using Continuum Damage Mechanics

Failure analysis and experimental study on bolted composite joints based on continuum damage mechanics

Progressive fracture analysis of the open-hole composite laminates: experiment and simulation

Experiment and Design Methods of Composite Scarf Repair for Primary-Load Bearing Structures

Peridynamic Analytical Method for Progressive Damage in Notched Composite Laminates

Progressive failure analysis on composite π joint