Abstract:Seismic isolation technology is being applied in large long-span-structured public buildings more and more often worldwide. Aimed to investigate the horizontal and vertical dynamic response of long-span gird structure, the shaking table tests of 1/20 scale long-span grid structures with and without base-isolation considering horizontal two-dimensional (2D) and three-dimensional (3D) seismic excitations were conducted. The test model was designed as ordinary long-span spatial grid structure, but with lead rubber bearings. Data on the acceleration, displacement, strain, and shear force of the base-isolation model and fixed-base model were collected and compared. The dynamic responses of the structure subjected to the horizontal and vertical ground motions with different intensities were studied. The experimental results showed that compared with the fixed-base model, the horizontal period and damping ratio of the base-isolation model can be significantly improved, reducing the horizontal dynamic response of the superstructure, and the horizontal isolation effect was improved with the increase of the seismic excitation intensity. The horizontal acceleration of the roof layer for the base-isolation model was amplified in 3D excitation compared to horizontal input due to horizontal-vertical coupling. Meanwhile, significant vertical acceleration and displacement responses of long-span roof for fixed-base structure were induced by horizontal seismic excitation. Although base isolation could not provide protection against vertical excitation, vertical isolation effect under 3D input could be achieved by effectively suppressing the vertical dynamic response of grid roof induced by the horizontal seismic component.

Analysis of Frame Structure Base-Isolation Based on ETABS

Seismic Isolation Layout Optimized of Mid-Rise Reinforced Concrete Building Frame Structure

Analytical Study On Buckling Restrained Braced Composite Frames

Frame Work on Performance-Based Seismic Design Theory of Base-Isolation Structures

Performance-Based Seismic Design and Evaluation of Fused Steel Diagrid Frame

Seismic Behaviors of High-Strength Bolted End-Plate Connected Composite Steel Beam and Square Concrete Filled Steel Tube Column Frames

Design and Analysis of the Base-isolated Structure

Isolation Design of A Complex Frame Structure in Grade Nine Area

INFLUENCE OF SOIL AND STRUCTURE DYNAMIC INTERACTION ON BASE SHAKE-ISOLATION STRUCTURE

APPLICATION PROSPECT OF BASE-ISOLATION TECHNOLOGY ON FRAMEWORK STRUCTURE FROM EARTHQUAKE DAMAGE OF AN COUNTY'S ADMINISTRATION BUILDING

Simulated Shaking Table Test Research of Isolated and Non-Isolated Frame Structure Model

Research on Structural Design of an Isolated High-Rise Building with Enlarged Base and Multiple Tower Layer in High-Intensity Area

Base Isolation Design of a Brick Masonry Residence Building Supported with Frame-Shear Wall

Base isolation structure parameter optimization analysis

Theoretical study on the design and application of the sliding base isolation structure

Shaking Table Tests on the Multi-Dimensional Seismic Response of Long-Span Grid Structure with Base-Isolation

Study on the influence of base shear distribution on the seismic response of base-isolated split-foundation structures

Reliability Analysis of Structures with Inerter-based Isolation Layer Under Stochastic Seismic Excitations

FEA Analysis of the Seismic Properties of the Integral Structure after Adding Steel Frame Storeys

Finite Element Analysis on Seismic Properties of Steel Braced Frame Structure

The Isolation Effect Analysis of Base and Story Isolation System in Vertical Seismic Action