Abstract:Organic aerogels represent an interesting new class of materials and as the basis for the generation of new carbonaceous materials, both finding application in catalytic and adsorbent technology.(1) These are prepared via the synthesis of an aqueous colloidal gel composed Of Suitable precursors. The gel state is generated by the formation of new chemical (i.e. polymerisation), and physical (i.e. hydrogen bonding) bonds, as ageing proceeds. The colloidal gel has a well-developed micro- and mesoporosity as well as large surface area. By fine-tuning the synthesis conditions, the pore architectures may be controlled. The solvent is subsequently removed to yield the aerogel, via extraction by supercritical fluids. For that CO2 is a rational choice as its critical point can be easily reached, and offers a wide range of temperatures and pressures, facilitating another dimension in material property control. The most commonly used precursors to generate the gel state are formaldehyde and resorcinol or its derivatives(2), but may also be prepared from the aqueous gelation and self-assembly of biomass derived polysaccharides.The transformation of organic aerogels via a controlled non-oxidative pyrolysis step, to produce low-density carbons is of increasing interest as the advantages of these materials become more evident. Carbon aerogels are chemically and mechanically more stable than the organic predecessor, provide excellent conductivity, and can be employed at high temperatures and pH. Control of carbon aerogel textural and surface properties is possible by selection of different organic precursors and careful selection of thermal treatment parameters. Interestingly, polysaccharide xerogels and aerogels may also be transformed into like carbons. which are termed Starbons (R)(3).Because of close relationship between certain organic and carbon aerogels in this chapter attention will be given to both. A detailed introduction to the synthesis and processing, characterisation and application of organic and carbon aerogels will be presented. The physical and chemical characteristics of these materials will be discussed in detail, with particular regard to density, specific surface area and porosity. Applications of aerogels will also be introduced, with a particularly accent on their use as heterogeneous catalyst supports. Future prospects for this exciting class of materials will also be proposed.

Synthesis of organic and carbon aerogels from phenol–furfural by two-step polymerization

Organic Aerogels As Precursors For The Preparation Of Porous Carbons

Synthesis of carbon aerogels with controlled morphology and pore structure to modulate their bulk density and thermal conductivity via a quick one-pot preparation strategy

Water-assisted synthesis of phenolic aerogel with superior compression and thermal insulation performance enabled by thick-united nano-structure

Facile Preparation of Cellulose Aerogels with Controllable Pore Structure

Preparation and characterization of phenol-melamine-formaldehyde aerogels

Ambient-pressure drying synthesis of large resorcinol–formaldehyde-reinforced silica aerogels with enhanced mechanical strength and superhydrophobicity

Polyphenols of Wood Bark: Organic Precursors for the Production of Polymer Aerogels

Low-density, high-strength and large-scaled monolithic carbon aerogels fabricated via modified ambient pressure drying

Synthesis of organic aerogels with tailorable morphology and strength by controlled solvent swelling following Hansen solubility

Robust Carbonaceous Nanofiber Aerogels from All Biomass Precursors

Preparation and Investigation of High Surface Area Aerogels from Crosslinked Polypropylenes

Organic solvents-free and ambient-pressure drying melamine formaldehyde resin aerogels with homogeneous structures, outstanding mechanical strength and flame retardancy

Fabrication of novel powdery carbon aerogels with high surface areas for superior energy storage

Research in porous structure of cellulose aerogel made from cellulose nanofibrils

Ferrocene Introduced into 5-Methylresorcinol-Based Organic Aerogels

Emerging Carbon-Nanofiber Aerogels: Chemosynthesis Versus Biosynthesis.

Self-catalyzed Gelling Synthesis of Aerogels with Inorganic and Organic Nanocomponents for Thermal Insulation and CO 2 Capture

Preparation and characterization of lignin-derived carbon aerogels

Synthesis of Porous and Mechanically Compliant Carbon Aerogels Using Conductive and Structural Additives

Synthesis of Alumina Aerogels by Ambient Drying Method and Control of Their Structures