Abstract:A Discrete Element Method (DEM) model is developed to study the particle breakage effect on the one-dimensional compression behavior of silica sands. The ‘maximum tensile stress’ breakage criterion considering multiple contacts is adopted to simulate the crushing of circular particles in the DEM. The model is compared with published experimental results. Comparison between the compression curves obtained from the numerical and experimental results shows that the proposed method is very effective in studying the compression behavior of silica sands considering particle breakage. The evolution of compression curves at different stress levels is extensively studied using contact force distribution, variation of contact number and particle size distribution curve with loading. It is found that particle breakage has great impact on compression behavior of sand, particularly after the yield stress is reached and particle breakage starts. The crushing probability of particles is found to be macroscopically affected by stress level and particle size distribution curve, and microscopically related to the evolutions of contact force and coordination number. Once the soil becomes well-graded and the average coordination number is greater than 4 in two-dimension, the crushing probability of parent particles can reduce by up to 5/6. It is found that the average contact force does not always increase with loading, but increases to a peak value then decreases once the soil becomes more well-graded. It is found through the loading rate sensitivity analysis that the compression behavior of sand samples in the DEM is also affected by the loading rate. Higher yield stresses are obtained at higher loading rates.

DEM Investigations of the Influence of Particle Crushing on the Shear Properties of Sands

Discrete Element Modeling of Sand Behavior in a Biaxial Shear Test

Sand Grain Crushing and Interface Shearing During Displacement Pile Installation in Sand

Exploring the effects of particle shape and content of fines on the shear behavior of sand-fines mixtures via the DEM

EXPERIMENT AND DISCRETE ELEMENT NUMERICAL SIMULATION FOR INFLUENCE OF PARTICLE MORPHOLOGY ON SHEAR STRENGTH OF SAND

DEM studies on the effect of particle breakage on the critical state behaviours of granular soils under undrained shear conditions

Experimental Research on the Influence of Particle Crushing on Direct Shear Strength of Sand

Micromechanical Investigation of the Particle Size Effect on the Shear Strength of Uncrushable Granular Materials

Study Of Evolution Of Sand Crushability Based On Discrete Elements Method

DEM Modeling of Particle Breakage in Silica Sands under One-Dimensional Compression

3D numerical simulation of particle breakage using discrete element method

DEM-aided Direct Shear Testing of Granular Sands Incorporating Realistic Particle Shape

Modeling shear behavior and strain localization in cemented sands by two-dimensional distinct element method analyses

DEM Analysis of the Size Effects on the Behavior of Crushable Granular Materials

Modeling Shear Behavior of Sand-Clay Interfaces Through Two-Dimensional Distinct Element Method Analysis

Exploring Macro-and Micro-Scale Responses of Sand in Direct Shear Tests by Numerical Simulations Using Non-Circular Particles

Static Shear Behavior of Crushed Rock Aggregate Subjected to Biaxial Compression

A coupled FEM-DEM study on mechanical behaviors of granular soils considering particle breakage

Experimental and Numerical Simulation Study on Shear Strength and Secondary Particle Breakage of Coarse Sand with Different Dry Densities

Coupled effects of particle overall regularity and sliding friction on the shear behavior of uniformly graded dense sands

The Effect of Porosity and Gradation on Shear Strength of Crushed Aggregate Based on DEM Approach