Abstract:Precast segmental columns have been frequently applied in regions of low seismicity due to rapid construction, high quality, and low downtime. Their lateral force–displacement curves were always calculated using iterative models in former studies, which could be time-consuming and arduous. Whereas, a non-iterative model can greatly improve computational efficiency and is preferred by designers. In this study, a non-iterative simplified analytical model was firstly proposed considering different neutral axis depths of the rocking interface. The neutral axis depth approached a constant value during lateral loading according to the results of the former tests and numerical studies. Then, a quasi-static test and finite element model of a precast segmental concrete-filled steel tube (PS-CFST) column were conducted to verify the proposed analytical model. Based on the finite element model, a nonlinear regression equation was set up to predict the constant neutral axis depth of the PS-CFST column according to the simulation results of 48 cases. Finally, the influence of the initial prestressing force, area of the prestressed tendons and gravity load on the lateral force capacity of the PS-CFST column were investigated. It was concluded that the constant value of neutral axis depth was positively related to axial ratio and diameter-thickness ratio, and negatively related to yield strength of steel tube of PS-CFST columns. The analytical model without iteration proposed in this study was appropriate to predict lateral force capacity of post-tensioned precast segmental columns, and it had a favorable agreement with testing and numerical results. Furthermore, the precast column with the lower gravity load and the higher reinforcement ratio of prestressed tendons would result in the larger post-yield stiffness.

Tension Tests of Elbow-Shaped Steel External Column Model of the National Stadium

Tension Tests of Steel Twisted Box-Section Element of the National Stadium

STUDY OF BEARING CAPACITY AND COMPLETE STRESS-STAIN CURVES FOR CONCRETE FILLED SQUARE STEEL TUBE COLUMNS

Experiments on flexural behavior of steel twisted box-section members of the National Stadium

Experimental Study of Confined Hot-Rolled H-shape Steel Columns under Cyclic Loading

Full-scale Steel Column Tests under Simulated Horizontal and Vertical Earthquake Loadings

Experimental research and finite element analysis on tubular joints of Hangzhou East Railway Station

Nonlinear FEA of Stability Bearing Capacity of Shuttle-Shaped Steel Lattice Columns with Bending Moment

Triaxial Hybrid Simulation and Cyclic Tests of Full-Scale Circular Steel Tube Columns

Seismic Behaviors of High-Strength Bolted End-Plate Connected Composite Steel Beam and Square Concrete Filled Steel Tube Column Frames

Global Stability Performance of Multi-Cellular T-Shaped CFST Slender Columns under Eccentric Compression

Design of twisted box-sections of primary structures for national stadium beinjing

Seismic Behavior Analysis of Large-Span Steel Structure of the National Stadium under Severe Earthquake

Cyclic lateral loading test on a sub-structure model of the National Swimming Center

Concrete-Filled Steel Tube Columns Under Cyclic Transverse In-Plane Or Out-Of-Plane Loading

Shaking Table Model Test of Jinan Olympic Stadium

Model test and elastic-plastic analysis on seismic performance of stadium canopy roof

Numerical study on the local buckling of 420MPA steel equal angle coloums under axial compression

Analytical model for evaluating lateral force capacity of precast concrete-filled steel tube column

Tests and Numerical Simulation on Short Composite-Sectioned Concrete Filled Steel Tubular Columns Subjected to Axial Compressive Loading

Experimental Investigation of Special-Shaped Concrete-Filled Square Steel Tube Composite Columns with Steel Hoops under Axial Loads