Abstract:An equivalent circuit model of Optically Addressed Spatial Light Modulator(OASLM) incorporating Ferroelectric Liquid Crystal(FLC) is proposed.The model is used in studying gray-scale response of the OASLM and intensity transfer characteristics while drive voltage frequency varying from 100~1 kHz and write-light intensity varying from 0~10 mW/cm2.The results indicate that the rise time of electro-optical responses decreases from 1.44 ms to 74 μs as write-light intensity increases from 0.5 mW/cm2 to 10 mW/cm2.It also indicates that write-light intensity has a range over which gray-scales are best produced since output-light intensity increases linearly or nearly linearly with write-light intensity in this region.The intensity transfer characteristic is highly dependent on drive voltage frequency which can be set to adjust the region producing gray-scales, the slope of intensity transfer characteristic in the region producing gray-scales,and so forth.When write-light intensity increases from 0.5 mW/cm2 to 10 mW/cm2,the gray-scale range(0.08 mW/cm2,1 mW/cm2) is changed to(2 mW/cm2,10 mW/cm2),and the slope of intensity transfer characteristic in the region is decreased.Furthermore,although intensity transfer characteristic is weakly dependent on erase-light intensity,the erase-light is necessary to restrain the unexpected optical response when write-light is not injected and ensure a proper erasure of the device.The simulation results from the model have shown good agreement with the reported experimental results in both magnitude and tendency.

Photo-Aligned Ferroelectric Liquid Crystal Display with Memorized Gray Scale

Photoaligned Ferroelectric Liquid Crystal Passive Matrix Display with Memorized Gray Scale

Gray Scale Generation and Stabilization in Photo-Aligned Ferroelectric Liquid Crystal

Passively Addressed FLC Display Possessing an Inherent Gray Scale and Memory

P-232L: Late-News Poster: New Results on Bistable Photoaligned Ferroelectric LCDs: Grey Scale Generation, Stabilization and Passive Driving Scheme

P-169: Photoaligned Bistable FLC Displays with Birefringent Color Switching

Color Sequential Display Based On Stacked Bistable Ferroelectric Lcd

Color Switching In Bistable Ferroelectric Lcds

Double Cells Achromatic Ferroelectric Liquid Crystal Displays

Transflective Ferroelectric Liquid‐crystal Display with a Single‐cell Gap

Double Cell Achromatic Ferroelectric Liquid Crystal Displays Using Photoalignment Technology

Novel Transflective Lcd Based on Patterned Polarizer Using Photoaligrunent Technique

Study on a lateral-electrical-field pixel architecture for FLC spatial light modulator with continuously tunable grayscales

Flc Displays for High Resolution Magnified View and Projection Applications

Lc Display Cell Photo-Alignment by A Super-Thin Azo-Dye Layer

FLC Microdisplays

P‐96: Alignment Optimization on Gen. 4.5 G for High‐framerate Ultra‐high‐resolution Ferroelectric Liquid Crystal Displays

12‐1: High‐resolution Fast Ferroelectric Liquid Crystal Displays on Gen 4.5

Ferroelectric Liquid Crystal Cells for Advanced Applications in Displays and Photonics

Gray-scale Response of Spatial Light Modulator Incorporating Ferroelectric Liquid Crystals

Ultrafast AFLC passive display for true 3D images