Abstract:An equivalent circuit model of Optically Addressed Spatial Light Modulator(OASLM) incorporating Ferroelectric Liquid Crystal(FLC) is proposed.The model is used in studying gray-scale response of the OASLM and intensity transfer characteristics while drive voltage frequency varying from 100~1 kHz and write-light intensity varying from 0~10 mW/cm2.The results indicate that the rise time of electro-optical responses decreases from 1.44 ms to 74 μs as write-light intensity increases from 0.5 mW/cm2 to 10 mW/cm2.It also indicates that write-light intensity has a range over which gray-scales are best produced since output-light intensity increases linearly or nearly linearly with write-light intensity in this region.The intensity transfer characteristic is highly dependent on drive voltage frequency which can be set to adjust the region producing gray-scales, the slope of intensity transfer characteristic in the region producing gray-scales,and so forth.When write-light intensity increases from 0.5 mW/cm2 to 10 mW/cm2,the gray-scale range(0.08 mW/cm2,1 mW/cm2) is changed to(2 mW/cm2,10 mW/cm2),and the slope of intensity transfer characteristic in the region is decreased.Furthermore,although intensity transfer characteristic is weakly dependent on erase-light intensity,the erase-light is necessary to restrain the unexpected optical response when write-light is not injected and ensure a proper erasure of the device.The simulation results from the model have shown good agreement with the reported experimental results in both magnitude and tendency.

Study on a lateral-electrical-field pixel architecture for FLC spatial light modulator with continuously tunable grayscales

Gray Scale Generation and Stabilization in Photo-Aligned Ferroelectric Liquid Crystal

Photo-Aligned Ferroelectric Liquid Crystal Display with Memorized Gray Scale

Passively Addressed FLC Display Possessing an Inherent Gray Scale and Memory

Transflective Ferroelectric Liquid‐crystal Display with a Single‐cell Gap

Photoaligned Ferroelectric Liquid Crystal Passive Matrix Display with Memorized Gray Scale

Color Sequential Display Based On Stacked Bistable Ferroelectric Lcd

Color Switching In Bistable Ferroelectric Lcds

Double Cells Achromatic Ferroelectric Liquid Crystal Displays

P-232L: Late-News Poster: New Results on Bistable Photoaligned Ferroelectric LCDs: Grey Scale Generation, Stabilization and Passive Driving Scheme

P-169: Photoaligned Bistable FLC Displays with Birefringent Color Switching

Liquid crystal cell design of VGA field sequential color LCoS display

Flc Displays for High Resolution Magnified View and Projection Applications

Reconfigurable Geometrical Phase Spatial Light Modulator Using Short‐Pitch Ferroelectric Liquid Crystals

Fringing fields in a liquid crystal spatial light modulator for beam steering

FLC Microdisplays

Gray-scale Response of Spatial Light Modulator Incorporating Ferroelectric Liquid Crystals

Electrically Switchable Structural Patterns and Diffractions in a Dual Frequency Nematic Liquid Crystal

Rapid fabrication of an electrically switchable liquid crystal Fresnel zone lens.

Optimization of Gray-Scale Performance in Pixellated-Metal-mirror FLC-OASLM by Equivalent Circuit Model

Ferroelectric Liquid Crystal Cells for Advanced Applications in Displays and Photonics